The benefits of limited feedback in organizations

In most firms, managers periodically assess workers' performance. Evidence suggeststhat managers withhold information during these reviews, and some observersargue that this necessarily reduces surplus. This paper assesses the validity of thisargument when workers have career concerns. Disclosure has two effects: it exposesthe worker to uncertainty about future effort levels, but allows him to use current effortto influence his employer's beliefs about future effort. The surplus-maximizingdisclosure policy reveals output realizations in the center of the distribution, butnot in the tails. Thus, it is efficient for firms to reveal some but not all performanceinformation.

Is confidence in decisions related to feedback? Evidence-and lack of evidence-from random samples of real-world managerial behavior?

Confidence in decision making is an important dimension of managerialbehavior. However, what is the relation between confidence, on the onehand, and the fact of receiving or expecting to receive feedback ondecisions taken, on the other hand? To explore this and related issuesin the context of everyday decision making, use was made of the ESM(Experience Sampling Method) to sample decisions taken by undergraduatesand business executives. For several days, participants received 4 or 5SMS messages daily (on their mobile telephones) at random moments at whichpoint they completed brief questionnaires about their current decisionmaking activities. Issues considered here include differences between thetypes of decisions faced by the two groups, their structure, feedback(received and expected), and confidence in decisions taken as well as inthe validity of feedback. No relation was found between confidence indecisions and whether participants received or expected to receivefeedback on those decisions. In addition, although participants areclearly aware that feedback can provide both confirming and disconfirming evidence, their ability to specify appropriatefeedback is imperfect. Finally, difficulties experienced inusing the ESM are discussed as are possibilities for further researchusing this methodology.

The provision of relative performance feedback information: An experimental analysis of performance and happiness

This paper studies the effect of providing relative performance feedback information onindividual performance and on individual affective response, when agents are rewardedaccording to their absolute performance. In a laboratory set-up, agents perform a realeffort task and when receiving feedback, they are asked to rate their happiness, arousaland feeling of dominance. Control subjects learn only their absolute performance, whilethe treated subjects additionally learn the average performance in the session.Performance is 17 percent higher when relative performance feedback is provided.Furthermore, although feedback increases the performance independent of the content(i.e., performing above or below the average), the content is determinant for theaffective response. When subjects are treated, the inequality in the happiness and thefeeling of dominance between those subjects performing above and below the averageincreases by 8 and 6 percentage points, respectively.

Modelling state dependence and feedback effects between poverty, employment and parental home emancipation among European youth

Youth is one of the phases in the life-cycle when some of the most decisivelife transitions take place. Entering the labour market or leaving parentalhome are events with important consequences for the economic well-beingof young adults. In this paper, the interrelationship between employment,residential emancipation and poverty dynamics is studied for eight Europeancountries by means of an econometric model with feedback effects. Resultsshow that youth poverty genuine state dependence is positive and highly significant.Evidence proves there is a strong causal effect between poverty andleaving home in Scandinavian countries, however, time in economic hardshipdoes not last long. In Southern Europe, instead, youth tend to leave theirparental home much later in order to avoid falling into a poverty state that ismore persistent. Past poverty has negative consequences on the likelihood ofemployment.

Structural characterization of laser-treated Cr3C2-NiCr coatings

The interconnected porosity of the Cr3C2-NiCr coatings obtained by high-velocity oxy fuel spraying is detrimental in corrosion and wear resistance applications. Laser treatments allow sealing of their surfaces through melting and resolidification of a thin superficial layer. A Nd:YAG laser beam was used to irradiate Cr3C2-NiCr coatings either in the continuous wave mode or at different repetition rates in the pulsed one. Results indicated that high peak and low mean laser irradiances are not good, since samples presented deep grooves and an extensive crack network. At low peak and higher mean laser irradiances the surface was molten, and only a few shallow cracks were observed. The interconnected porosity was completely eliminated in a layer up to 80 m thick, formed by large Cr7C3 grains imbedded in a NiCr matrix.

Growth, optical characterization, and laser operation of a stoichiometric crystal KYb(WO4)(2)

We present our recent achievements in the growing and optical characterization of KYb(WO4)2 (hereafter KYbW) crystals and demonstrate laser operation in this stoichiometric material. Single crystals of KYbW with optimal crystalline quality have been grown by the top-seeded-solution growth slow-cooling method. The optical anisotropy of this monoclinic crystal has been characterized, locating the tensor of the optical indicatrix and measuring the dispersion of the principal values of the refractive indices as well as the thermo-optic coefficients. Sellmeier equations have been constructed valid in the visible and near-IR spectral range. Raman scattering has been used to determine the phonon energies of KYbW and a simple physical model is applied for classification of the lattice vibration modes. Spectroscopic studies (absorption and emission measurements at room and low temperature) have been carried out in the spectral region near 1 µm characteristic for the ytterbium transition. Energy positions of the Stark sublevels of the ground and the excited state manifolds have been determined and the vibronic substructure has been identified. The intrinsic lifetime of the upper laser level has been measured taking care to suppress the effect of reabsorption and the intrinsic quantum efficiency has been estimated. Lasing has been demonstrated near 1074 nm with 41% slope efficiency at room temperature using a 0.5 mm thin plate of KYbW. This laser material holds great promise for diode pumped high-power lasers, thin disk and waveguide designs as well as for ultrashort (ps/fs) pulse laser systems.

Spectrum of transmitted light in optical bistability: Effects of phase fluctuations of the driving laser

Time-dependent correlation functions and the spectrum of the transmitted light are calculated for absorptive optical bistability taking into account phase fluctuations of the driving laser. These fluctuations are modeled by an extended phase-diffusion model which introduces non-Markovian effects. The spectrum is obtained as a superposition of Lorentzians. It shows qualitative differences with respect to the usual calculation in which phase fluctuations of the driving laser are neglected.

Theory for the transient statistics of a dye laser

A theory is presented to explain the statistical properties of the growth of dye-laser radiation. Results are in agreement with recent experimental findings. The different roles of pump-noise intensity and correlation time are elucidated.

Particle agglomeration study in rf silane plasmas: In situ study by polarization-sensitive laser light scattering

To determine self‐consistently the time evolution of particle size and their number density in situ multi‐angle polarization‐sensitive laser light scattering was used. Cross‐polarization intensities (incident and scattered light intensities with opposite polarization) measured at 135° and ex situ transmission electronic microscopy analysis demonstrate the existence of nonspherical agglomerates during the early phase of agglomeration. Later in the particle time development both techniques reveal spherical particles again. The presence of strong cross‐polarization intensities is accompanied by low‐frequency instabilities detected on the scattered light intensities and plasma emission. It is found that the particle radius and particle number density during the agglomeration phase can be well described by the Brownian free molecule coagulation model. Application of this neutral particle coagulation model is justified by calculation of the particle charge whereby it is shown that particles of a few tens of nanometer can be considered as neutral under our experimental conditions. The measured particle dispersion can be well described by a Brownian free molecule coagulation model including a log‐normal particle size distribution.

Development of laser-fired contacts for amorphous silicon layers obtained by Hot-Wire CVD

In this work we study aluminium laser-fired contacts for intrinsic amorphous silicon layers deposited by Hot-Wire CVD. This structure could be used as an alternative low temperature back contact for rear passivated heterojunction solar cells. An infrared Nd:YAG laser (1064 nm) has been used to locally fire the aluminium through the thin amorphous silicon layers. Under optimized laser firing parameters, very low specific contact resistances (ρc ∼ 10 mΩ cm2) have been obtained on 2.8 Ω cm p-type c-Si wafers. This investigation focuses on maintaining the passivation quality of the interface without an excessive increase in the series resistance of the device.

Hydroxyapatite coatings grown by pulsed laser deposition with a beam of 355 nm wavelength

Calcium phosphate coatings, obtained at different deposition rates by pulsed laser deposition with a Nd:YAG laser beam of 355-nm wavelength, were studied. The deposition rate was changed from 0.043 to 1.16 /shot by modification of only the ablated area, maintaining the local fluence constant to perform the ablation process in similar local conditions. Characterization of the coatings was performed by scanning electron microscopy, x-ray diffractometry, and infrared, micro-Raman, and x-ray photoelectron spectroscopy. The coatings showed a compact surface morphology formed by glassy gains with some droplets on them. Only hydroxyapatite (HA) and alpha-tricalcium phosphate (alpha-TCP) peaks were found in the x-ray diffractograms. The relative content of alpha TCP diminished with decreasing deposition rates, and only HA peaks were found for the lowest rate. The origin of alpha TCP is discussed.

Structural characterization of laser-treated Cr3C2-NiCr coatings

The interconnected porosity of the Cr3C2-NiCr coatings obtained by high-velocity oxy fuel spraying is detrimental in corrosion and wear resistance applications. Laser treatments allow sealing of their surfaces through melting and resolidification of a thin superficial layer. A Nd:YAG laser beam was used to irradiate Cr3C2-NiCr coatings either in the continuous wave mode or at different repetition rates in the pulsed one. Results indicated that high peak and low mean laser irradiances are not good, since samples presented deep grooves and an extensive crack network. At low peak and higher mean laser irradiances the surface was molten, and only a few shallow cracks were observed. The interconnected porosity was completely eliminated in a layer up to 80 m thick, formed by large Cr7C3 grains imbedded in a NiCr matrix.

Species resolved analysis of the expansion of hydroxyapatite laser ablation plumes

The plume generated by ablation of hydroxyapatite targets under ArF excimer laser irradiation has been investigated by means of fast intensified CCD-imaging and optical emission spectroscopy. Results have shown that the plume splits into two plasma clouds as it expands. Time and spatial resolved spectra have revealed that under the experiment conditions emission is mostly due to calcium neutral atoms and calcium oxide molecular radicals. Imaging of the plume with the aid of bandpass filters has demonstrated that the emissive species in the larger and faster plasma cloud are calcium neutral atoms, whereas in the smaller and slower one they are calcium oxide molecular radicals