Raman spectroscopy as a powerful analytical tool: probing the structure of matter

Podeu consultar el llibre complet a: http://hdl.handle.net/2445/32166

Surface-enhanced laser desorption/ionisation time-of-flight mass spectrometry: A tool to predict pork quality

Expression of water soluble proteins of fresh pork Longissimus thoracis from 4 pure breed pigs (Duroc, Large White, Landrace, and Piétrain) was studied to identify candidate protein markers for meat quality. Surface-enhanced laser desorption/ionisation time-of-flight mass spectrometry (SELDI-TOF-MS) was used to obtain the soluble protein profiles of Longissimus thoracis muscles. The pure breeds showed differences among the studied meat quality traits (pHu, drip loss, androstenone, marbling, intramuscular fat, texture, and moisture), but no significant differences were detected in sensory analysis. Associations between protein peaks obtained with SELDI-TOF-MS and meat quality traits, mainly water holding capacity, texture and skatole were observed. Of these peaks, a total of 10 peaks from CM10 array and 6 peaks from Q10 array were candidate soluble protein markers for pork loin quality. The developed models explained a limited proportion of the variability, however they point out interesting relationships between protein expression and meat quality

Técnica de respiración Jacobson para reducir el estrés de enfermeras de unidades de cuidados intensivos

Problema del estudio: El sector de enfermería perteneciente a las Unidades de Cuidados Intensivos presentan estrés, y se ofrece la Técnica de respiración Jacobson como herramienta para disminuir los niveles y los problemas derivados del estrés. Objetivo general: Evaluar la eficacia de la técnica de respiración Jacobson sobre el estrés en los profesionales de enfermería de UCI. Objetivos específicos: Diseñar un taller de respiración de la técnica Jacobson, para enfermería de UCI; comparar los niveles de estrés de los enfermeros de UCI antes y después de la intervención mediante los cuestionarios STAI, NSS y NWI; y evaluar los principales factores estresantes de los enfermeros/as en su trabajo, comparando los 2 grupos de la intervención (los que realizan el programa de la Técnica de relajación Jacobson y los que no participan). Metodología: El ámbito de estudio será una planta del servicio de UCI de un Hospital de Agudos. Se trata de un ensayo clínico aleatorio y experimental, que constará de 2 grupos control; uno realizará la intervención (Grupo 1) y el otro no (Grupo 2). Los sujetos del estudio son las enfermeras/os de una planta de UCI de un Hospital de Agudos, incluidas enfermeras administrativas y gerentes. Los instrumentos que se utilizarán son: la recogida de datos personales de cada participante, Test STAI (State-Trait Anxiety Inventory), Escala de Estrés de Enfermería NSS (Nursing Stress Scale) y Escala del entorno de práctica enfermera del NWI (Nursing Work Index). Limitaciones del estudio: Pérdidas de seguimiento y la no participación de las enfermeras/os en el estudio.

Creation and Validation of Chronojump-Boscosystem: A Free Tool to Measure Vertical Jumps

Measuring the height of the vertical jump is an indicator of the strength and power of the lower body. The technological tools available to measure the vertical jump are black boxes and are not open to third-party verification or adaptation. We propose the creation of a measurement system called Chronojump-Boscosystem, consisting of open hardware and free software. Methods: A microcontroller was created and validated using a square wave generator and an oscilloscope. Two types of contact platforms were developed using different materials. These platforms were validated by the minimum pressure required for activation at different points by a strain gauge, together with the on/off time of our platforms in respect of the Ergojump-Boscosystem platform by a sample of 8 subjects performing submaximal jumps with one foot on each platform. Agile methodologies were used to develop and validate the software. Results: All the tools fall under the free software / open hardware guidelines and are, in that sense, free. The microcontroller margin of error is 0.1%. The validity of the fiberglass platform is 0.95 (ICC). The management software contains nearly 113.000 lines of code and is available in 7 languages.

Aplicación de la metodología “policy deployment” planificación estratégica a un departamento de suministro de materiales para aerogeneradores para reducir inventarios

Debido a la necesidad de diferenciarse y hacer frente a la competencia, las empresas han apostado por desarrollar operaciones que den valor al cliente, por eso muchas de ellas han visto en las herramientas lean la oportunidad para mejorar sus operaciones. Esta mejora implica la reducción de dinero, personas, equipos grandes, inventario y espacio, con dos objetivos: eliminar despilfarro y reducir la variabilidad. Para conseguir los objetivos estratégicos de la empresa es imprescindible qué éstos estén alineados con los planes de la gerencia a nivel medio y a su vez con el trabajo realizado por los empleados para asegurar que cada persona está alineada en la misma dirección y al mismo tiempo. Ésta es la filosofía de la planificación estratégica. Por ello uno de los objetivos de este proyecto será el desarrollar una herramienta que facilite la exposición de los objetivos de la empresa y la comunicación de los mismos a todos los niveles de la organización para a partir de ellos y tomando como referencia la necesidad de reducir inventarios en la cadena de suministro se realizará un estudio de la producción de un componente de control del aerogenerador para conseguir nivelarla y reducir su inventario de producto terminado. Los objetivos particulares en este apartado serán reducir el inventario en un 28%, nivelar la producción reduciendo la variabilidad del 31% al 24%, mantener un stock máximo de 24 unidades garantizando el suministro ante una demanda variable, incrementar la rotación del inventario en un 10% y establecer un plan de acción para reducir el lead time entre un 40-50%. Todo ello será posible gracias a la realización del mapa de valor presente y futuro para eliminar desperdicios y crear un flujo continuo y el cálculo de un supermercado que mantenga el stock en un nivel óptimo.

Evaluación y optimización de los servicios de un taller de mantenimiento mediante el software de simulación ARENA

Debido a la necesidad de diferenciarse y hacer frente a la competencia, las empresas han apostado por desarrollar operaciones que den valor al cliente, por eso muchas de ellas han visto en las herramientas lean la oportunidad para mejorar sus operaciones. Esta mejora implica la reducción de dinero, personas, equipos grandes, inventario y espacio, con dos objetivos: eliminar despilfarro y reducir la variabilidad. Para conseguir los objetivos estratégicos de la empresa es imprescindible qué éstos estén alineados con los planes de la gerencia a nivel medio y a su vez con el trabajo realizado por los empleados para asegurar que cada persona está alineada en la misma dirección y al mismo tiempo. Ésta es la filosofía de la planificación estratégica. Por ello uno de los objetivos de este proyecto será el desarrollar una herramienta que facilite la exposición de los objetivos de la empresa y la comunicación de los mismos a todos los niveles de la organización para a partir de ellos y tomando como referencia la necesidad de reducir inventarios en la cadena de suministro se realizará un estudio de la producción de un componente de control del aerogenerador para conseguir nivelarla y reducir su inventario de producto terminado. Los objetivos particulares en este apartado serán reducir el inventario en un 28%, nivelar la producción reduciendo la variabilidad del 31% al 24%, mantener un stock máximo de 24 unidades garantizando el suministro ante una demanda variable, incrementar la rotación del inventario en un 10% y establecer un plan de acción para reducir el lead time entre un 40-50%. Todo ello será posible gracias a la realización del mapa de valor presente y futuro para eliminar desperdicios y crear un flujo continuo y el cálculo de un supermercado que mantenga el stock en un nivel óptimo.

RNA interference: a new and powerful tool for functional genomic analysis.

In many species, the introduction of double-stranded RNA induces potent and specific gene silencing, referred to as RNA interference. This phenomenon, which is based on targeted degradation of mRNAs and occurs in almost any eukaryote, from trypanosomes to mice including plants and fungi, has sparked general interest from both applied and fundamental standpoints. RNA interference, which is currently used to investigate gene function in a variety of systems, is linked to natural resistance to viruses and transposon silencing, as if it were a primitive immune system involved in genome surveillance. Here, we review the mechanism of RNA interference in post-transcriptional gene silencing, its function in nature, its value for functional genomic analysis, and the modifications and improvements that may make it more efficient and inheritable. We also discuss the future directions of this versatile technique in both fundamental and applied science.

Translation and validation of the Ten-Item-Personality Inventory into spanish and catalan

In response to an increasing need for ever-shorter personality instruments, Gosling, Rentfrow, and Swann (2003) developed the Ten-Item-Personality Inventory (TIPI), which measures the dimensions of the Five Factor Model (FFM) using 10 items (two for each dimension) and can be administered in about one minute. In two studies and using a multi-judge (self and observer) and multi-instrument design, we develop Spanish (Castilian) and Catalan versions of the TIPI and evaluate them in terms of internal consistency, test-retest reliability, convergent, discriminant, and content validity, as well as self-observer correlations. Test-retest correlations were strong, and convergence with the NEO-PI-R factors was significant. There were also strong correlations between observer ratings and the participants’ self-ratings. Despite some inconsistencies with respect to the Agreeableness scale, the Catalan translation and both translations into Spanish of the original TIPI demonstrated sufficient psychometric properties to warrant use as a Five Factor personality measure when the use of longer instruments is not convenient or possible. Furthermore, as the first translation of a brief standard Big Five Instrument into Catalan, this work should facilitate future research on personality in the Catalan-speaking population.

Evaluación de la psicopatología del preescolar mediante el Early Childhood Inventory-4 (ECI-4): concordancia entre padres y maestros.= Assessment of psychopathology in preschool age children through the Early Childhood Inventory-4 (ECI-4): Agreement among parents and teachers

El objetivo principal de este estudio es conocer la concordancia entre informantes, padres y maestros,en cada una de las dimensiones o categorías diagnósticas del Early Childhood Inventory-4 (ECI-4).Además, se pretende analizar la influencia de la presencia de problemas de salud en los padres en ladescripción y valoración de la conducta de una muestra de 204 alumnos de preescolar (3 a 6 años) deperfiles socioeconómicos diferentes. Los resultados indican que los padres tienden a valorar con mayorseveridad los síntomas, observándose una mayor concordancia entre informantes en los relativos alos trastornos del desarrollo

Exploratory Factor Analysis of the contents and styles of irrational thoughts assessed by "The Attitudes and Beliefs Inventory"

The factor structure of a back translated Spanish version (Lega, Caballo and Ellis, 2002) of the Attitudes and Beliefs Inventory (ABI) (Burgess, 1990) is analyzed in a sample of 250 university students.The Spanish version of the ABI is a 48-items self-report inventory using a 5-point Likert scale that assesses rational and irrational attitudes and beliefs. 24-items cover two dimensions of irrationality: a) areas of content (3 subscales), and b) styles of thinking (4 subscales).An Exploratory Factor Analysis (Parallel Analysis with Unweighted Least Squares method and Promin rotation) was performed with the FACTOR 9.20 software (Lorenzo-Seva and Ferrando, 2013).The results reproduced the main four styles of irrational thinking in relation with the three specific contents of irrational beliefs. However, two factors showed a complex configuration with important cross-loadings of different items in content and style. More analyses are needed to review the specific content and style of such items.

Exploratory Factor Analysis of the contents and styles of irrational thoughts assessed by "The Attitudes and Beliefs Inventory"

The factor structure of a back translated Spanish version (Lega, Caballo and Ellis, 2002) of the Attitudes and Beliefs Inventory (ABI) (Burgess, 1990) is analyzed in a sample of 250 university students.The Spanish version of the ABI is a 48-items self-report inventory using a 5-point Likert scale that assesses rational and irrational attitudes and beliefs. 24-items cover two dimensions of irrationality: a) areas of content (3 subscales), and b) styles of thinking (4 subscales).An Exploratory Factor Analysis (Parallel Analysis with Unweighted Least Squares method and Promin rotation) was performed with the FACTOR 9.20 software (Lorenzo-Seva and Ferrando, 2013).The results reproduced the main four styles of irrational thinking in relation with the three specific contents of irrational beliefs. However, two factors showed a complex configuration with important cross-loadings of different items in content and style. More analyses are needed to review the specific content and style of such items.

Maca - a configurable tool to integrate Polish morphological data

There are a number of morphological analysers for Polish. Most of these, however, are non-free resources. What is more, different analysers employ different tagsets and tokenisation strategies. This situation calls for a simpleand universal framework to join different sources of morphological information, including the existing resources as well as user-provided dictionaries. We present such a configurable framework that allows to write simple configuration files that define tokenisation strategies and the behaviour of morphologicalanalysers, including simple tagset conversion.

General electromagnetic simulation tool to predict the microwave nonlinear response of planar, arbitrarily-shaped HTS structures

This work describes a simulation tool being developed at UPC to predict the microwave nonlinear behavior of planar superconducting structures with very few restrictions on the geometry of the planar layout. The software is intended to be applicable to most structures used in planar HTS circuits, including line, patch, and quasi-lumped microstrip resonators. The tool combines Method of Moments (MoM) algorithms for general electromagnetic simulation with Harmonic Balance algorithms to take into account the nonlinearities in the HTS material. The Method of Moments code is based on discretization of the Electric Field Integral Equation in Rao, Wilton and Glisson Basis Functions. The multilayer dyadic Green's function is used with Sommerfeld integral formulation. The Harmonic Balance algorithm has been adapted to this application where the nonlinearity is distributed and where compatibility with the MoM algorithm is required. Tests of the algorithm in TM010 disk resonators agree with closed-form equations for both the fundamental and third-order intermodulation currents. Simulations of hairpin resonators show good qualitative agreement with previously published results, but it is found that a finer meshing would be necessary to get correct quantitative results. Possible improvements are suggested.