Application of ZnO-Functionalised-Sepiolite in weaning piglet diets

The objective was to evaluate the effect of ZnO-Functionalised-Sepiolite (ZnO-Sepiolite) to fulfil Zn requirements and health status of weaning piglets. Pre-starter Basal Diet (BD, corn– soybean based, from weaning till 14 days on trial) was calculated to provide 27 mg Zn/kg feed from raw materials and had no added ZnO and no antibiotics or organic acids. Treatments during pre-starter period were: 1) BD+90% of NRC Zn requirements completed with ZnO (ZnO90); 2) BD+90% of NRC Zn requirements completed with ZnO-Sepiolite (ZnOS90); 3) BD+3000 mg ZnO/kg of diet (ZnO3000); 4) BD+150 mg added Zn/kg diet from ZnO-Sepiolite (ZnOS150). The starter feed (corn–soybean based, from 14 till 31 days on trial) was common for all piglets, and met 90% NRC Zn requirements by adding ZnO. Diarrhea affected more than 50% of the animals of ZnO90, ZnOS90 and ZnOS150, and 33% of the ZnO3000 animals. Animals from ZnOS90 tended (Pb0.10) to improve Gain to Feed ratio (G:F) compared to animals from ZnO90 (0.830 kg/kg vs. 0.811 kg/kg for G:F). Performance of animals from ZnO3000 was not significantly different from the other treatments, and was numerically similar to animals from ZnOS90. The inclusion of ZnO at 3000 mg/kg of feed in the pre-starter period numerically decreased P in serum at the end of this period, with no effect on Ca level; normal levels were restored after 2 weeks of feeding the same levels of Zn than other animals. Animals fed ZnOSepiolite diets had numerically higher serum Ca than ZnO90 and ZnO3000 at 12 days and higher than ZnO90 at 28 days. Serum Zn levels were significantly higher for ZnO3000 than the other treatments.

Aplicación de la ingeniería del software sobre la herramienta MATE : application controller

Este proyecto tiene como objetivo crear y aplicar una metodología a una aplicación llamada MATE que fue creada en en el año 2003 por Anna Sikora para su tesis doctoral. Se trata de dotar el proyecto MATE de las herramientas necesarias para garantizar su evolución. La metodología creada consta de la especificación de un entorno de trabajo y una serie de documentos que detallan los procesos relativos al desarrollo de MATE. Además se han creado algunas nuevas características que hacen de MATE una herramienta más completa y cómoda.

Design of Novel Frequency Generation Circuit with Application to Ultra-Wideband Distributed Oscillators

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.

Clinical application of differential time to positivity of blood cultures as a diagnostic method for catheter-related bloodstream infection.

La sospita de bacterièmia relacionada a catèter (BRC) necessita la retirada d’aquest, confirmant-se a posteriori només en un 15-25%. La diferencia en el temps de positivització d´ hemocultius (DTP) ha demostrat ser un mètode fiable per el diagnòstic de BRC evitant la retirada del catèter. Amb la intenció de comprovar la utilitat clínica de la DTP, l’hem comparada amb un mètode diagnòstic estàndard. Hem inclòs 133 pacients ingressats a una unitat de cures intensives portadors de catèters venosos centrals. 56 pacients s’han aleatoritzats. No hem trobat diferències significatives en quant a morbi-mortalitat en els 2 grups havent evitat 70% de retirada innecessària de catèters en el grup de DTP.

I. Identification and characterisation of epigenetically altered tumor supressor genes by proteomic and genomic approches / II. Studies of genes regualted by MeCP2 union to its promoter regions by proteomic and genmomic approches

DNA methylation has an important impact on normal cell physiology, thus any defects in this mechanism may be related to the development of various diseases In this project we are interested in identifying epigeneticaliy modified genes, in general controlled by processes related to the DNA methylation, by means of a new strategy combining protomic and genomic analyses. First, the two Dimensional-Difference Gel Electrophoresis (2-DIGE) protein analyses of extracts obtained from HCT-116 wt and double knockout for DNMT1 and DNMT3b (DKO) cells revealed 34 proteins overexpressed in the condition of DNMTs depletion. From five genes with higher transcript lavels in DKO cells, comparing with HCT-116 wt. oniy AKR1B1, UCHLl and VIM are melhylated in HCT-116. As expected. the DNA methvlation 1s lost in DKO cells. The rneth,vl ation of VIM and UCHLl promoters in some cancer samples has already been repaired, thus further studies has been focused on AKRlBI. AKR1B1 expression due lo DNA methyiaton of promoter region seems to occur specilfically in the colon cancer cell Iines. which was confirmed in the DNA rnethylation status and expression analyses. performed on 32 different cancer cell lines (including colon, breast, lymphoma, leukemia, neuroblastoma, glioma and lung cancer cell Iines) as well as normal colon and normal lymphocytes samples. AKRIBI expression after treatments with DNA demethvlating agent (AZA) was rescued in 5 coloncancer cell lines (including genetic regulation of the candidate gene. The methylation status of the rest of the genes identified in proteomic analysis was checked by methylation specific PCR (MSP) experiment and all appeared to be unmethylated. The similar research has been done also bv means of Mecp2-null mouse model For 14 selected candidate genes the analyses of expression leveis, methylation Status and MeCP2 interaction with promoters are currently being performed.

Generació de documents en application/pdf a partir d'una estructura XML

Aquesta memòria vol mostrar que la tecnologia XML és la millor alternativa per a afrontar el repte tecnològic existent en els sistemes d'extracció d'informació de les aplicacions de nova generació. Aquests sistemes, d'una banda, han de garantir la seva independència respecte dels esquemes de les bases de dades dels quals s'alimenten i, de l'altra, han de ser capaços de mostrar la informació en múltiples formats.

Application of compositional data analysis to geochemical data of marine sediments

In an earlier investigation (Burger et al., 2000) five sediment cores near the RodriguesTriple Junction in the Indian Ocean were studied applying classical statistical methods(fuzzy c-means clustering, linear mixing model, principal component analysis) for theextraction of endmembers and evaluating the spatial and temporal variation ofgeochemical signals. Three main factors of sedimentation were expected by the marinegeologists: a volcano-genetic, a hydro-hydrothermal and an ultra-basic factor. Thedisplay of fuzzy membership values and/or factor scores versus depth providedconsistent results for two factors only; the ultra-basic component could not beidentified. The reason for this may be that only traditional statistical methods wereapplied, i.e. the untransformed components were used and the cosine-theta coefficient assimilarity measure.During the last decade considerable progress in compositional data analysis was madeand many case studies were published using new tools for exploratory analysis of thesedata. Therefore it makes sense to check if the application of suitable data transformations,reduction of the D-part simplex to two or three factors and visualinterpretation of the factor scores would lead to a revision of earlier results and toanswers to open questions . In this paper we follow the lines of a paper of R. Tolosana-Delgado et al. (2005) starting with a problem-oriented interpretation of the biplotscattergram, extracting compositional factors, ilr-transformation of the components andvisualization of the factor scores in a spatial context: The compositional factors will beplotted versus depth (time) of the core samples in order to facilitate the identification ofthe expected sources of the sedimentary process.Kew words: compositional data analysis, biplot, deep sea sediments

Conditional compositional biplots: theory and application

The biplot has proved to be a powerful descriptive and analytical tool in many areasof applications of statistics. For compositional data the necessary theoreticaladaptation has been provided, with illustrative applications, by Aitchison (1990) andAitchison and Greenacre (2002). These papers were restricted to the interpretation ofsimple compositional data sets. In many situations the problem has to be described insome form of conditional modelling. For example, in a clinical trial where interest isin how patients’ steroid metabolite compositions may change as a result of differenttreatment regimes, interest is in relating the compositions after treatment to thecompositions before treatment and the nature of the treatments applied. To study thisthrough a biplot technique requires the development of some form of conditionalcompositional biplot. This is the purpose of this paper. We choose as a motivatingapplication an analysis of the 1992 US President ial Election, where interest may be inhow the three-part composition, the percentage division among the three candidates -Bush, Clinton and Perot - of the presidential vote in each state, depends on the ethniccomposition and on the urban-rural composition of the state. The methodology ofconditional compositional biplots is first developed and a detailed interpretation of the1992 US Presidential Election provided. We use a second application involving theconditional variability of tektite mineral compositions with respect to major oxidecompositions to demonstrate some hazards of simplistic interpretation of biplots.Finally we conjecture on further possible applications of conditional compositionalbiplots

Compositional ideas in the bayesian analysis of categorical data with application to dose finding clinical trials

Compositional random vectors are fundamental tools in the Bayesian analysis of categorical data.Many of the issues that are discussed with reference to the statistical analysis of compositionaldata have a natural counterpart in the construction of a Bayesian statistical model for categoricaldata.This note builds on the idea of cross-fertilization of the two areas recommended by Aitchison (1986)in his seminal book on compositional data. Particular emphasis is put on the problem of whatparameterization to use

Alternative ways to estimate change points in multinomial sequences. An application to an authorship attribution problem

The statistical analysis of literary style is the part of stylometry that compares measurable characteristicsin a text that are rarely controlled by the author, with those in other texts. When thegoal is to settle authorship questions, these characteristics should relate to the author’s style andnot to the genre, epoch or editor, and they should be such that their variation between authors islarger than the variation within comparable texts from the same author.For an overview of the literature on stylometry and some of the techniques involved, see for exampleMosteller and Wallace (1964, 82), Herdan (1964), Morton (1978), Holmes (1985), Oakes (1998) orLebart, Salem and Berry (1998).Tirant lo Blanc, a chivalry book, is the main work in catalan literature and it was hailed to be“the best book of its kind in the world” by Cervantes in Don Quixote. Considered by writterslike Vargas Llosa or Damaso Alonso to be the first modern novel in Europe, it has been translatedseveral times into Spanish, Italian and French, with modern English translations by Rosenthal(1996) and La Fontaine (1993). The main body of this book was written between 1460 and 1465,but it was not printed until 1490.There is an intense and long lasting debate around its authorship sprouting from its first edition,where its introduction states that the whole book is the work of Martorell (1413?-1468), while atthe end it is stated that the last one fourth of the book is by Galba (?-1490), after the death ofMartorell. Some of the authors that support the theory of single authorship are Riquer (1990),Chiner (1993) and Badia (1993), while some of those supporting the double authorship are Riquer(1947), Coromines (1956) and Ferrando (1995). For an overview of this debate, see Riquer (1990).Neither of the two candidate authors left any text comparable to the one under study, and thereforediscriminant analysis can not be used to help classify chapters by author. By using sample textsencompassing about ten percent of the book, and looking at word length and at the use of 44conjunctions, prepositions and articles, Ginebra and Cabos (1998) detect heterogeneities that mightindicate the existence of two authors. By analyzing the diversity of the vocabulary, Riba andGinebra (2000) estimates that stylistic boundary to be near chapter 383.Following the lead of the extensive literature, this paper looks into word length, the use of the mostfrequent words and into the use of vowels in each chapter of the book. Given that the featuresselected are categorical, that leads to three contingency tables of ordered rows and therefore tothree sequences of multinomial observations.Section 2 explores these sequences graphically, observing a clear shift in their distribution. Section 3describes the problem of the estimation of a suden change-point in those sequences, in the followingsections we propose various ways to estimate change-points in multinomial sequences; the methodin section 4 involves fitting models for polytomous data, the one in Section 5 fits gamma modelsonto the sequence of Chi-square distances between each row profiles and the average profile, theone in Section 6 fits models onto the sequence of values taken by the first component of thecorrespondence analysis as well as onto sequences of other summary measures like the averageword length. In Section 7 we fit models onto the marginal binomial sequences to identify thefeatures that distinguish the chapters before and after that boundary. Most methods rely heavilyon the use of generalized linear models

Assessing the Precision of Compositional Data in a Stratified Double Stage Cluster Sample: Application to the Swiss Earnings Structure Survey

Precision of released figures is not only an important quality feature of official statistics,it is also essential for a good understanding of the data. In this paper we show a casestudy of how precision could be conveyed if the multivariate nature of data has to betaken into account. In the official release of the Swiss earnings structure survey, the totalsalary is broken down into several wage components. We follow Aitchison's approachfor the analysis of compositional data, which is based on logratios of components. Wefirst present diferent multivariate analyses of the compositional data whereby the wagecomponents are broken down by economic activity classes. Then we propose a numberof ways to assess precision

Application for fault location in electrical power distribution systems

Fault location has been studied deeply for transmission lines due to its importance in power systems. Nowadays the problem of fault location on distribution systems is receiving special attention mainly because of the power quality regulations. In this context, this paper presents an application software developed in Matlabtrade that automatically calculates the location of a fault in a distribution power system, starting from voltages and currents measured at the line terminal and the model of the distribution power system data. The application is based on a N-ary tree structure, which is suitable to be used in this application due to the highly branched and the non- homogeneity nature of the distribution systems, and has been developed for single-phase, two-phase, two-phase-to-ground, and three-phase faults. The implemented application is tested by using fault data in a real electrical distribution power system

Compositional Time Series: An Application

The composition of the labour force is an important economic factor for a country.Often the changes in proportions of different groups are of interest.I this paper we study a monthly compositional time series from the Swedish LabourForce Survey from 1994 to 2005. Three models are studied: the ILR-transformed series,the ILR-transformation of the compositional differenced series of order 1, and the ILRtransformationof the compositional differenced series of order 12. For each of thethree models a VAR-model is fitted based on the data 1994-2003. We predict the timeseries 15 steps ahead and calculate 95 % prediction regions. The predictions of thethree models are compared with actual values using MAD and MSE and the predictionregions are compared graphically in a ternary time series plot.We conclude that the first, and simplest, model possesses the best predictive power ofthe three models

Easy Java web application development

El projecte que es descriu en aquest document consisteix en el desenvolupament d'una arquitectura de suport per a aplicacions web empresarials basada en tecnologia J2EE. La idea és gestionar totes les funcionalitats de baix nivell per tal que el desenvolupador de l'aplicació web pugui centrar-se quasi exclusivament en implementar els temes funcionals.

Intelligent PCA contribution analysis for quality estimation in batch processes. Application in a sequencing batch reactor for wastewater treatment

En aquest treball, es proposa un nou mètode per estimar en temps real la qualitat del producte final en processos per lot. Aquest mètode permet reduir el temps necessari per obtenir els resultats de qualitat de les anàlisi de laboratori. S'utiliza un model de anàlisi de componentes principals (PCA) construït amb dades històriques en condicions normals de funcionament per discernir si un lot finalizat és normal o no. Es calcula una signatura de falla pels lots anormals i es passa a través d'un model de classificació per la seva estimació. L'estudi proposa un mètode per utilitzar la informació de les gràfiques de contribució basat en les signatures de falla, on els indicadors representen el comportament de les variables al llarg del procés en les diferentes etapes. Un conjunt de dades compost per la signatura de falla dels lots anormals històrics es construeix per cercar els patrons i entrenar els models de classifcació per estimar els resultas dels lots futurs. La metodologia proposada s'ha aplicat a un reactor seqüencial per lots (SBR). Diversos algoritmes de classificació es proven per demostrar les possibilitats de la metodologia proposada.