Kinetics of martensitic transitions in Cu-Al-Mn under thermal cycling: Analysis at multiple length scales

In this paper we study the evolution of the kinetic features of the martensitic transition in a Cu-Al-Mn single crystal under thermal cycling. The use of several experimental techniques including optical microscopy, calorimetry, and acoustic emission, has enabled us to perform an analysis at multiple scales. In particular, we have focused on the analysis of avalanche events (associated with the nucleation and growth of martensitic domains), which occur during the transition. There are significant differences between the kinetics at large and small length scales. On the one hand, at small length scales, small avalanche events tend to sum to give new larger events in subsequent loops. On the other hand, at large length scales the large domains tend to split into smaller ones on thermal cycling. We suggest that such different behavior is the necessary ingredient that leads the system to the final critical state corresponding to a power-law distribution of avalanches.

Elastic constants of Ni-Mn-Ga magnetic shape memory alloys

We have measured the adiabatic second order elastic constants of two Ni-Mn-Ga magnetic shape memory crystals with different martensitic transition temperatures, using ultrasonic methods. The temperature dependence of the elastic constants has been followed across the ferromagnetic transition and down to the martensitic transition temperature. Within experimental errors no noticeable change in any of the elastic constants has been observed at the Curie point. The temperature dependence of the shear elastic constant C' has been found to be very different for the two alloys. Such a different behavior is in agreement with recent theoretical predictions for systems undergoing multi-stage structural transitions.

Temperature and magnetic-field dependence of the elastic constants of Ni-Mn-Al magnetic Heusler alloy

We report on measurements of the adiabatic second-order elastic constants of the off-stoichiometric Ni54Mn23Al23 single-crystalline Heusler alloy. The variation in the temperature dependence of the elastic constants has been investigated across the magnetic transition and over a broad temperature range. Anomalies in the temperature behavior of the elastic constants have been found in the vicinity of the magnetic phase transition. Measurements under applied magnetic field, both isothermal and variable temperature, show that the value of the elastic constants depends on magnetic order, thus giving evidence for magnetoelastic coupling in this alloy system.

Rapid Biodiversity Assessment and Monitoring Method for Highly Diverse Benthic Communities: A Case Study of Mediterranean Coralligenous Outcrops

Increasing anthropogenic pressures urge enhanced knowledge and understanding of the current state of marine biodiversity. This baseline information is pivotal to explore present trends, detect future modifications and propose adequate management actions for marine ecosystems. Coralligenous outcrops are a highly diverse and structurally complex deep-water habitat faced with major threats in the Mediterranean Sea. Despite its ecological, aesthetic and economic value, coralligenous biodiversity patterns are still poorly understood. There is currently no single sampling method that has been demonstrated to be sufficiently representative to ensure adequate community assessment and monitoring in this habitat. Therefore, we propose a rapid non-destructive protocol for biodiversity assessment and monitoring of coralligenous outcrops providing good estimates of its structure and species composition, based on photographic sampling and the determination of presence/absence of macrobenthic species. We used an extensive photographic survey, covering several spatial scales (100s of m to 100s of km) within the NW Mediterranean and including 2 different coralligenous assemblages: Paramuricea clavata (PCA) and Corallium rubrum assemblage (CRA). This approach allowed us to determine the minimal sampling area for each assemblage (5000 cm² for PCA and 2500 cm²for CRA). In addition, we conclude that 3 replicates provide an optimal sampling effort in order to maximize the species number and to assess the main biodiversity patterns of studied assemblages in variability studies requiring replicates. We contend that the proposed sampling approach provides a valuable tool for management and conservation planning, monitoring and research programs focused on coralligenous outcrops, potentially also applicable in other benthic ecosystems

Photonic characteristics of Langmuir-Blodgett self-assembled monolayers of colloidal silica particles

Monodispersed colloidal crystals based on silica sub-micrometric particles were synthesized using the Stöber-Fink-Bohn process. The control of nucleation and coalescence result in improved characteristics such as high sphericity and very low size dispersion. The resulting silica particles show characteristics suitable for self-assembling across large areas of closely-packed 2D crystal monolayers by an accurate Langmuir-Blodgett deposition process on glass, fused silica and silicon substrates. Due to their special optical properties, colloidal films have potential applications in fields including photonics, electronics, electro-optics, medicine (detectors and sensors), membrane filters and surface devices. The deposited monolayers of silica particles were characterized by means of FESEM, AFM and optical transmittance measurements in order to analyze their specific properties and characteristics. We propose a theoretical calculation for the photonic band gaps in 2D systems using an extrapolation of the photonic behavior of the crystal from 3D to 2D. In this work we show that the methodology used and the conditions in self-assembly processes are decisive for producing high-quality two-dimensional colloidal crystals by the Langmuir-Blodgett technique.

CUPA XXI: Modernidad líquida, estructura e improvisación

Postprint (published version)

Atomic Ordering and Martensitic Transitions in Cu-Zn-Al Shape Memory Alloys

We present results from both, calorimetric and dilatometric studies of the isothermal ordering process taking place in a Cu-Zn-Al shape memory alloy after quenches from Tq temperatures ranging from 350 K to 1200 K. The dissipated energy and the length variations of the system are obtained during the process. The change of these quantities in the whole process have been compared with the difference [MATH] between Ms, measured after the relaxation and Ms measured just after the quench. We obtain that these three quantities present, as a function of Tq, the same qualitative behaviour. These changes are then associated with changes of the L21 ordering after the quench in the system. The relaxational process does not follow a single exponential decay. Instead, a continuous slowing down is observed. A relaxation time [MATH] has been defined to characterize the relaxation rate. We show that [MATH] depends on both the annealing and the quenching (Tq [MATH] 800 K) temperatures through an Arrhenius law.

El sistema dental y su importancia en el estudio de la evolución humana: revisión bibliográfica.

La dentición ha sido durante mucho tiempo una de las estructuras biológicas mejor estudiadas, esta singularidad radica en su resistencia al paso del tiempo. El sistema dental ofrece una posibilidad incomparable para comprender mejor el origen y filogénesis de los vertebrados, entre ellos el hombre. Esta investigación, a través de una revisión bibliográfica, explora cuatro aspectos del sistema dental, como son: Su origen, el aspecto biológico, la utilidad de los rasgos dentales en los análisis poblacionales, y finalmente, intenta precisar las bases genéticas de los dientes. Con respecto a este último, lo fundamental no estaría sólo en la descripción morfológica del diente, sino el porqué de su morfología, es decir, porqué son lo que son. Por lo tanto, se puede indagar: ¿porqué se producen diferentes variedades morfológicas dentro de nuestra especie?, entre otras interrogantes

El sistema dental y su importancia en el estudio de la evolución humana: revisión bibliográfica.

La dentición ha sido durante mucho tiempo una de las estructuras biológicas mejor estudiadas, esta singularidad radica en su resistencia al paso del tiempo. El sistema dental ofrece una posibilidad incomparable para comprender mejor el origen y filogénesis de los vertebrados, entre ellos el hombre. Esta investigación, a través de una revisión bibliográfica, explora cuatro aspectos del sistema dental, como son: Su origen, el aspecto biológico, la utilidad de los rasgos dentales en los análisis poblacionales, y finalmente, intenta precisar las bases genéticas de los dientes. Con respecto a este último, lo fundamental no estaría sólo en la descripción morfológica del diente, sino el porqué de su morfología, es decir, porqué son lo que son. Por lo tanto, se puede indagar: ¿porqué se producen diferentes variedades morfológicas dentro de nuestra especie?, entre otras interrogantes

Using the optical flow to implement a relative virtual mouse controlled by head movements

The following paper introduces the work conducted to create a relative virtual mouse based on the interpretation of head movements and face gesture through a low cost camera and the optical flow of the images. This virtual device is designed specifically as an alternative non-contact pointer for people with mobility impairments in the upper extremities and reduced head control. The proposed virtual device was compared with a conventional mouse, a touchpad and a digital joystick. Validation results show performances close to a digital joystick but far away from a conventional mouse.

El análisis de los datos cualitativos: un proceso complejo

Este artículo muestra la complejidad del análisis de los datos cualitativos a partir de las ideas sobre el método planteadas por Morin y surge fruto del proceso analítico llevado a cabo durante la elaboración de nuestras tesis doctorales. Nuestra experiencia parte del método de las comparaciones constantes y representa un desafío dotado de contradicciones complementarias, donde los datos se agrupan y desagrupan, se integran y se desintegran de acuerdo con los principios hologramático, dialógico y recursivo. Como resultado establecemos las siguientes fases del proceso de análisis: 1) 'El todo': desarrollando ideas; 2) Del todo a las partes: separando y agrupando; 3) De lo particular a lo general: re-agrupando; 4) Descomponer el todo en sus partes sin perder el todo: integrando y relacionando; 5) Relacionar las partes que dan sentido al todo: identificando la categoría central.

La traducció del Càntic dels Càntics de Carles Riba

Carles Riba’s activity as a translator of Greek classics (Xenophon, Plutarch, Homer, Sophocles, Euripides, Aeschylus) and works of important authors who wrote in Latin (Virgil), English (Edgar A. Poe) and German (Rilke, Hölderlin) is well known and has been widely studied. In contrast, the great humanist’s translations of books of the Bible -Song of Songs and the Book of Ruth- from Hebrew to Catalan have never been the subject of a monographic study. This piece of work is an edition and a detailed analysis of his version of the Song of Solomon. The notes in the text point out the translator’s contributions and uncertainties in a work published at a pivotal time in the Catalan language’s history

De la metodologia a la pràctica : anàlisi de les metodologies d'ensenyament musical i elaboració d'una proposta metodològica per a la pràctica docent en l'àmbit del llenguatge musical a les escoles de música

Aquest treball vol ser una revisió d'algunes de les principals metodologies desenvolupades al llarg del segle XX per l'ensenyament del llenguatge musical. Aquesta revisió serà completada amb una anàlisi comparada de les visions filosòfiques i els objectius didàctics de les diferents propostes, d'on extreure unes conclusions per a una possible nova proposta didàctica. Les metodologies que s'analitzen són les dels següents autors: Émile Jaques-Dalcroze, Carl Orff, Zoltán Kodály, Edgar Willems i Maurice Martenot.