Spermatological characteristics of Pleurogenidae (Digenea) inferred from the ultrastructural study of Pleurogenes claviger, Pleurogenoides medians and Prosotocus confusus

The present work constitutes the first ultrastructural analysis of the spermatozoon in the Pleurogenidae, with the study of three species belonging to three of the 16 genera included in this family, namely Pleurogenes claviger, Pleurogenoides medians and Prosotocus confusus. The mature spermatozoa of these pleurogenids present two axonemes of the 9+'1' trepaxonematan pattern, a nucleus, two mitochondria, two bundles of parallel cortical microtubules, external ornamentation, spine-like bodies and granules of glycogen. The organization of these characters in the sperm cell is similar in the three species. Thus, the anterior spermatozoon extremity is filiform and a continuous and submembranous layer of parallel cortical microtubules surrounds the axonemes at their anterior end. The posterior spermatozoon extremity exhibits the second axoneme and corresponds to the Cryptogonimidean type of Quilichini et al. (2010). Slight differences were noted between the spermatozoon of P. confusus and those of the two remaining species in the location of mitochondria.

General electromagnetic simulation tool to predict the microwave nonlinear response of planar, arbitrarily-shaped HTS structures

This work describes a simulation tool being developed at UPC to predict the microwave nonlinear behavior of planar superconducting structures with very few restrictions on the geometry of the planar layout. The software is intended to be applicable to most structures used in planar HTS circuits, including line, patch, and quasi-lumped microstrip resonators. The tool combines Method of Moments (MoM) algorithms for general electromagnetic simulation with Harmonic Balance algorithms to take into account the nonlinearities in the HTS material. The Method of Moments code is based on discretization of the Electric Field Integral Equation in Rao, Wilton and Glisson Basis Functions. The multilayer dyadic Green's function is used with Sommerfeld integral formulation. The Harmonic Balance algorithm has been adapted to this application where the nonlinearity is distributed and where compatibility with the MoM algorithm is required. Tests of the algorithm in TM010 disk resonators agree with closed-form equations for both the fundamental and third-order intermodulation currents. Simulations of hairpin resonators show good qualitative agreement with previously published results, but it is found that a finer meshing would be necessary to get correct quantitative results. Possible improvements are suggested.

INDISIM-YEAST, an individual-based model to study yeast

INDISIM-YEAST, an individual-based simulator, models the evolution of a yeast population by settingup rules of behaviour for each individual cell according to their own biological rules and characteristics. Ittakes into account the uptake, metabolism, budding reproduction and viability of the yeast cells, over aperiod of time in the bulk of a liquid medium, occupying a three dimensional closed spatial grid with twokinds of particles (glucose and ethanol). Each microorganism is characterized by its biomass, genealogicalage, states in the budding cellular reproduction cycle and position in the space among others. Simulationsare carried out for population properties (global properties), as well as for those properties that pertain toindividual yeast cells (microscopic properties). The results of the simulations are in good qualitativeagreement with established experimental trends.

Epidemiology of foodborne Norovirus outbreaks in Catalonia, Spain

Background: Noroviruses are one of the principal biological agents associated with the consumption of contaminated food. The objective of this study was to analyse the size and epidemiological characteristics of foodborne outbreaks of gastroenteritis in Catalonia, a region in the northeast of Spain. Methods: In all reported outbreaks of gastroenteritis associated with food consumption, faecal samples of persons affected were analysed for bacteria and viruses and selectively for parasites. Study variables included the setting, the number of people exposed, age, sex, clinical signs and hospital admissions. The study was carried out from October 2004 to October 2005. Results: Of the 181 outbreaks reported during the study period, 72 were caused by Salmonella and 30 by norovirus (NoV); the incidence rates were 14.5 and 9.9 per 100,000 person-years, respectively. In 50% of the NoV outbreaks and 27% of the bacterial outbreaks (p = 0.03) the number of persons affected was ≥10; 66.7% of NoV outbreaks occurred in restaurants; no differences in the attack rates were observed according to the etiology. Hospitalizations were more common (p = 0.03) in bacterial outbreaks (8.6%) than in NoV outbreaks (0.15%). Secondary cases accounted for 4% of cases in NoV outbreaks compared with 0.3% of cases in bacterial outbreaks (p < 0.001) Conclusion: Norovirus outbreaks were larger but less frequent than bacterial outbreaks, suggesting that underreporting is greater for NoV outbreaks. Food handlers should receive training on the transmission of infections in diverse situations. Very strict control measures on handwashing and environmental disinfection should be adopted in closed or partially-closed institutions.

Meat characteristics of chickens from an F1 cross of two improved Spanish breeds depending on slaughter age

The present study analysed the meat characteristics of i) improved Castellana Negra chickens slaughtered at 18 weeks (CN-18) and ii) F1 crossbred chickens from improved Castellana Negra hens and improved Penedesenca Negra cocks (CNPN) slaughtered at 12 weeks and 18 weeks of age (young and adult animals, respectively). Purebred and crossbred specimens were compared at similar weights (CN-18 and CNPN-12) and ages (CN-18 and CNPN-18). The protein content of the meat was similar for the three types of animals; heavier animals (CNPN-18) had more fat than those slaughtered at lower weights (CNPN-12 and CN-18). Adults had a higher saturated fatty acid content and the young CNPN chickens had more monounsaturated fatty acids than CN chickens. In the CNPN adults, less water was lost during cooking, which is directly related to the juiciness of the meat. With regard to sensory analysis, a darker colour was observed in the meat as much as the internal fat of adult animals, in addition to greater colour uniformity. The meat of young CNPN birds was juicier, whereas that of the CN chickens was more fibrous. Therefore, we conclude that meat from CNPN chickens presents chemical, physical, and sensorial characteristics that make these animals a genetic base for alternative poultry production.

The coal bearing Cenozoic As Pontes Basin (NW Spain): Geological influence on its coal's characteristics

Lignite deposits in the Cenozoic As Pontes strike-slip basin (northwestern Spain)were formed as a function of specific paleoclimatic conditions and tectonic evolution of the basin.

Do mediterranean genera not included in Tachet et al. (2002) have mediterranean trait characteristics?

Do mediterranean genera not included in Tachet et al. 2002 have mediterranean trait characteristics? Multiple-trait databases are increasingly used in community ecology in different regions of the world. In Europe, Tachet et al.(2002) compiled an aquatic macroinvertebrate database for 473 taxa using information on 11 biological traits described by 63 categories. However, less studied regions, at the time of the compilation of the database, such as the mediterranean Basin, can harbour exclusive genera, which were not included in Tachet"s database. In a large-scale study across the mediterranean Basin, we found 44 genera that were not included in Tachet"s database (NEW genera). Our main aim was to compile trait information for these NEW genera and assess whether these genera had specific traits that could explain their exclusivity to the Mediterranean region. We compared the trait characteristics of NEW genera to those of genera only found in Mediterranean or temperate regions that were included in the Tachet"s database (MED and TEM genera, respectively). We found that NEW genera had more mediterranean characteristics than TEM genera and that some trait categories of NEW genera were even more mediterranean-like than the traits of MED genera (e.g., diapause). Therefore, our results suggest that the specific biological traits of these NEW genera allow them to cope successfully and exclusively with the harsh environmental conditions of the mediterranean climate rivers, which could partially explain their absence in Tachet"s database. Other explanations, such as the limited dispersal ability of these NEW genera to reach and colonize temperate Europe or the rarity of these NEW genera, should also be considered. We provide biological traits of the NEW genera to be used in future studies on the mediterranean river ecology.

Characteristics of 2D convective structures in Catalonia (NE Spain): an analysis using radar data and GIS

Flood simulation studies use spatial-temporal rainfall data input into distributed hydrological models. A correct description of rainfall in space and in time contributes to improvements on hydrological modelling and design. This work is focused on the analysis of 2-D convective structures (rain cells), whose contribution is especially significant in most flood events. The objective of this paper is to provide statistical descriptors and distribution functions for convective structure characteristics of precipitation systems producing floods in Catalonia (NE Spain). To achieve this purpose heavy rainfall events recorded between 1996 and 2000 have been analysed. By means of weather radar, and applying 2-D radar algorithms a distinction between convective and stratiform precipitation is made. These data are introduced and analyzed with a GIS. In a first step different groups of connected pixels with convective precipitation are identified. Only convective structures with an area greater than 32 km2 are selected. Then, geometric characteristics (area, perimeter, orientation and dimensions of the ellipse), and rainfall statistics (maximum, mean, minimum, range, standard deviation, and sum) of these structures are obtained and stored in a database. Finally, descriptive statistics for selected characteristics are calculated and statistical distributions are fitted to the observed frequency distributions. Statistical analyses reveal that the Generalized Pareto distribution for the area and the Generalized Extreme Value distribution for the perimeter, dimensions, orientation and mean areal precipitation are the statistical distributions that best fit the observed ones of these parameters. The statistical descriptors and the probability distribution functions obtained are of direct use as an input in spatial rainfall generators.

Effect of compressibility in bubble formation in closed systems

We analyze the stability of small bubbles in a closed system with fixed volume, temperature, and number of molecules. We show that there exists a minimum stable size of a bubble. Thus there exists a range of densities where no stable bubbles are allowed and the system has a homogeneous density which is lower than the coexistence density of the liquid. This becomes possible due to the finite liquid compressibility. Capillary analysis within the developed"modified bubble" model illustrates that the existence of the minimum bubble size is associated to the compressibility and it is not possible when the liquid is strictly incompressible. This finding is expected to have very important implications in cavitation and boiling.

Construcció d'un equip per a la producció de cervesa artesana

Catalunya és un dels territoris on hi ha hagut més auge del sector de la cervesa artesana, i són molt nombroses les microcerveseries i les botigues especialitzades on es poden trobar els recursos materials necessaris, a més de ser centres difusió de coneixements relacionats. Així, doncs, aquest projecte està emmarcat en un context que permet el desenvolupament de tècniques d’elaboració de cervesa artesana. Aquest projecte es basa en la construcció d’un equip amb materials reutilitzats i amb un pressupost limitat que permet reproduir a petita escala els processos d’elaboració que es duen a terme en les microcerveseries artesanes actuals. El projecte s’ha assentat sobre la comprensió dels fonaments teòrics i pràctics del procés d’elaboració de cervesa, i amb l’experiència inicial d’elaboració de cervesa amb un equip bàsic de tipus homebrewer. Per minimintzar costos els tancs s’han construït a partir de barrils de cervesa i les parts sobrants s’han aprofitat per a altres elements. S’han emprat elements quotidians com una olla a pressió i s’ha construït un sistema regulador de pressió (per al tanc de fermentació cilindrocònic isobàric construït) en lloc d’adquirir-lo. S’ha posat l’èmfasi en minimitzar la necessitat de manipulació manual durant l’elaboració. Per tant, s’han instal·lat els components de l’equip formant un circuit tancat amb sistema de bombeig, i s’ha incorporat un sistema que permet el control i la lectura de les temperatures de cada procés. Altres elements són el sistema de filtres amb mecanisme de tub en forma d’ela (que permet l’extracció del most dels tanc de maceració i de cocció d’una manera efectiva i sense necessitat de manipulació) i el sistema de dutxa (que permet automatitzar el procés de rentat i filtrat). Un element que distingeix aquest equip d’altres equips emprats en algunes microcerveseries artesanes és el tanc de fermentació cilindrocònic isobàric amb vàlvula controladora de pressió, que permet prescindir de la doble fermentació en ampolla, ja que permet aprofitar el gas carbònic produït durant la fermentació per la carbonatació de la cervesa. Es pot concloure que gràcies a les seves característiques, l’equip permet realitzar successives elaboracions obtenint el mateix producte amb les mateixes característiques organolèptiques, principalement gràcies a la cambra de fermentació, que permet realitzar les etapes de fermentació, maduració i clarificació controlant la temperatura desitjada; al tanc de maceració amb aïllament, que permet realitzar el procés a temperatura constant sense pèrdues tèrmiques i al sistema de control de temperatura de totes les etapes. L’únic inconvenient és que, degut a la manca pressupostària, ha estat impossible l’adquisició d’un sistema d’embotellament isobàric que permeti realitzar l’embotellament sense pèrdues del gas carbònic. Per tant, el producte final pot embotellar-se amb una lleugera pèrdua de gas o es pot emmagatzemar en el mateix fermentador cilindrocònic per al seu consum directe, a l’estil d’alguns brewpubs.

An Explanatory Approach to the Political Uses of ICT Initiatives for Participation : Institutions, Context, and Characteristics of the Actors

Political actors use ICTs in a different manner and in different degrees when it comes to achieving a closer relationship between the public and politicians. Usually, political parties develop ICT strategies only for electoral campaigning and therefore restrain ICT usages to providing information and establishing a few channels of communication. By contrast, local governments make much more use of ICT tools for participatory and deliberative purposes. These differences in usages have not been well explained in the literature because of a lack of a comprehensive explanatory model. This chapter seeks to build the basis for this model, that is, to establish which factors affect and condition different political uses of ICTs and which principles underlie that behaviour. We consider that political actors are intentional and their behaviour is mediated by the political institutions and the socioeconomic context of the country. Also, though, the actor¿s own characteristics, such as the type and size of the organization or the model of e-democracy that the actor upholds, can have an influence in launching ICT initiatives for approaching the public.

Imaging polarimetry of the fogbow: polarization characteristics of white rainbows measured in the high Arctic

The knowledge on the optics of fogbows is scarce, and their polarization characteristics have never been measured to our knowledge. To fill this gap we measured the polarization features of 16 fogbows during the Beringia 2005 Arctic polar research expedition by imaging polarimetry in the red, green and blue spectral ranges. We present here the first polarization patterns of the fogbow. In the patterns of the degree of linear polarization p, fogbows and their supernumerary bows are best visible in the red spectral range due to the least dilution of fogbow light by light scattered in air. In the patterns of the angle of polarization α fogbows are practically not discernible because their α-pattern is the same as that of the sky: the direction of polarization is perpendicular to the plane of scattering and is parallel to the arc of the bow, independently of the wavelength. Fogbows and their supernumeraries were best seen in the patterns of the polarized radiance. In these patterns the angular distance δ between the peaks of the primary and the first supernumerary and the angular width σ of the primary bow were determined along different radii from the center of the bow. δ ranged between 6.08° and 13.41° , while σ changed from 5.25° to 19.47° . Certain fogbows were relatively homogeneous, meaning small variations of δ and σ along their bows. Other fogbows were heterogeneous, possessing quite variable δ- and σ-values along their bows. This variability could be a consequence of the characteristics of the high Arctic with open waters within the ice shield resulting in the spatiotemporal change of the droplet size within the fog

Features extraction based on the Discrete Hartley Transform for closed contour

In this paper the authors propose a new closed contour descriptor that could be seen as a Feature Extractor of closed contours based on the Discrete Hartley Transform (DHT), its main characteristic is that uses only half of the coefficients required by Elliptical Fourier Descriptors (EFD) to obtain a contour approximation with similar error measure. The proposed closed contour descriptor provides an excellent capability of information compression useful for a great number of AI applications. Moreover it can provide scale, position and rotation invariance, and last but not least it has the advantage that both the parameterization and the reconstructed shape from the compressed set can be computed very efficiently by the fast Discrete Hartley Transform (DHT) algorithm. This Feature Extractor could be useful when the application claims for reversible features and when the user needs and easy measure of the quality for a given level of compression, scalable from low to very high quality.

Impedance field and noise of submicrometer n+ nn+ diodes: analytical approach

A theoretical model for the noise properties of n+nn+ diodes in the drift-diffusion framework is presented. In contrast with previous approaches, our model incorporates both the drift and diffusive parts of the current under inhomogeneous and hot-carrier conditions. Closed analytical expressions describing the transport and noise characteristics of submicrometer n+nn+ diodes, in which the diode base (n part) and the contacts (n+ parts) are coupled in a self-consistent way, are obtained