Beyond the first steps: Sustaining Health OER Initiatives in Ghana

The introduction of open educational resources (OER) in two Ghanaian universities through a grant-funded project was embraced with a lot of enthusiasm. The project started on a high note and the Colleges of Health Sciences in the two universities produced a significant number of e-learning materials as health OER in the first year. Growing challenges such as faculty time commitments, technological and infrastructural constraints, shortage of technical expertise, lack of awareness beyond the early adopters and non-existent system for OER dissemination and use set in. These exposed the fact that institutional policy and integration was essential to ensure effective implementation and sustainability of OER efforts. Informed by the early OER experiences at the two institutions, this paper proposes that institutions in low resource settings perhaps need to pay close attention to awareness creation, initiative structuring, funding, capacity building, systemization for scalability and motivation if OER sustainability is to be achieved.

Statistical modeling on coordinates

This paper is a first draft of the principle of statistical modelling on coordinates. Several causes —which would be long to detail—have led to this situation close to the deadline for submitting papers to CODAWORK’03. The main of them is the fast development of the approach along thelast months, which let appear previous drafts as obsolete. The present paper contains the essential parts of the state of the art of this approach from my point of view. I would like to acknowledge many clarifying discussions with the group of people working in this field in Girona, Barcelona, Carrick Castle, Firenze, Berlin, G¨ottingen, and Freiberg. They have given a lot of suggestions and ideas. Nevertheless, there might be still errors or unclear aspects which are exclusively my fault. I hope this contribution serves as a basis for further discussions and new developments

Implementation of a robust coded structured light technique for dynamic 3D measurements

This paper presents the implementation details of a coded structured light system for rapid shape acquisition of unknown surfaces. Such techniques are based on the projection of patterns onto a measuring surface and grabbing images of every projection with a camera. Analyzing the pattern deformations that appear in the images, 3D information of the surface can be calculated. The implemented technique projects a unique pattern so that it can be used to measure moving surfaces. The structure of the pattern is a grid where the color of the slits are selected using a De Bruijn sequence. Moreover, since both axis of the pattern are coded, the cross points of the grid have two codewords (which permits to reconstruct them very precisely), while pixels belonging to horizontal and vertical slits have also a codeword. Different sets of colors are used for horizontal and vertical slits, so the resulting pattern is invariant to rotation. Therefore, the alignment constraint between camera and projector considered by a lot of authors is not necessary

Projecte de trasllat de l’ explotació de boví de llet “Mas Masdevall” a Olot

L’ objectiu principal d’ aquest projecte és el de dissenyar una nova explotació de boví de llet a lagranja “Mas Masdevall”, a Olot, comarca de la Garrotxa, província de Girona, per tal de traslladar l’explotació existent a una ubicació més allunyada; a més d’aquest canvi d’ubicació, també s’augmentarà el nombre de vaques de la granja de les 80 originals a una capacitat total de 120 vaques en producció. Aquest projecte planteja la construcció d’una nau per a l’allotjament de les vaques en producció, una sala de munyir-lleteria, un femer i una fossa de purins. La nau de producció tindrà una capacitat per a 120 vaques en producció en llotges individuals, 7 places d’infermeria, 7 per maternitat, 12 vaques eixutes totes en jaç de palla, a més de 51 places per vedelles en jaç i un lot de 22 vedelles d’entre 16 i 22 mesos en llotges individuals per facilitar la posterior estabulació durant la producció. També s’ubicaran 14 boxes individuals per els vedells i la recria al costat de la nau. La sala de munyir serà de 2x10 places paral·leles a més de la sala d’espera i l’oficina lleteria

Intelligent PCA contribution analysis for quality estimation in batch processes. Application in a sequencing batch reactor for wastewater treatment

En aquest treball, es proposa un nou mètode per estimar en temps real la qualitat del producte final en processos per lot. Aquest mètode permet reduir el temps necessari per obtenir els resultats de qualitat de les anàlisi de laboratori. S'utiliza un model de anàlisi de componentes principals (PCA) construït amb dades històriques en condicions normals de funcionament per discernir si un lot finalizat és normal o no. Es calcula una signatura de falla pels lots anormals i es passa a través d'un model de classificació per la seva estimació. L'estudi proposa un mètode per utilitzar la informació de les gràfiques de contribució basat en les signatures de falla, on els indicadors representen el comportament de les variables al llarg del procés en les diferentes etapes. Un conjunt de dades compost per la signatura de falla dels lots anormals històrics es construeix per cercar els patrons i entrenar els models de classifcació per estimar els resultas dels lots futurs. La metodologia proposada s'ha aplicat a un reactor seqüencial per lots (SBR). Diversos algoritmes de classificació es proven per demostrar les possibilitats de la metodologia proposada.

Sistema de representació per una web 3.0.

En la web, hi ha una gran quantitat de coneixement desorganitzat i molt heterogeni. Tal com està construïda ara mateix la web, es possible que el coneixement sobre un camp estigui dispers per varis recursos de la web. Una forma d'intentar inferir coneixement de recursos diferents sense intervenció humana, seria creant programes intel·ligents que interpretessin la informació de les diferents fonts. Aquesta solució seria costosa i seria tot un repte fer-ho. D'altra banda, també hi ha la idea, d'acompanyar els continguts amb representació d'ells mateixos, (una representació estandarditzada), que permetés crear autentiques xarxes de coneixement per les quals un programa intel·ligent podria inferir coneixement molt mes fàcilment. El propòsit d'aquest projecte és aprofundir sobre aquesta última proposta, que afegeix coneixement a la web. Per fer-ho coneixerem una eina proposada per afegir significat a la web, l'OWL. Investigarem les seves característiques, i la seva base i entendrem perquè i com s'utilitza. També es presentaran diferents eines per treballar amb OWL. Finalment es presentarà una web semàntica a mode d'exemple.

Contribution to Asterisk Open Source Project

With this final master thesis we are going to contribute to the Asterisk open source project. Asterisk is an open source project that started with the main objective of develop an IP telephony platform, completely based on Software (so not hardware dependent) and under an open license like GPL. This project was started on 1999 by the software engineer Mark Spencer at Digium. The main motivation of that open source project was that the telecommunications sector is lack of open solutions, and most of the available solutions are based on proprietary standards, which are close and not compatible between them. Behind the Asterisk project there is a company, Digum, which is the project leading since the project was originated in its laboratories. This company has some of its employees fully dedicated to contribute to the Asterisk project, and also provide the whole infrastructure required by the open source project. But the business of Digium isn't based on licensing of products due to the open source nature of Asterisk, but it's based on offering services around Asteriskand designing and selling some hardware components to be used with Asterisk. The Asterisk project has grown up a lot since its birth, offering in its latest versions advanced functionalities for managing calls and compatibility with some hardware that previously was exclusive of proprietary solutions. Due to that, Asterisk is becoming a serious alternative to all these proprietaries solutions because it has reached a level of maturity that makes it very stable. In addition, as it is open source, it can be fully customized to a givenrequirement, which could be impossible with the proprietaries solutions. Due to the bigness that is reaching the project, every day there are more companies which develop value added software for telephony platforms, that are seriously evaluating the option of make their software fully compatible withAsterisk platforms. All these factors make Asterisk being a consolidated project but in constant evolution, trying to offer all those functionalities offered by proprietaries solutions. This final master thesis will be divided mainly in two blocks totally complementaries. In the first block we will analyze Asterisk as an open source project and Asterisk as a telephony platform (PBX). As a result of this analysis we will generate a document, written in English because it is Asterisk project's official language, which could be used by future contributors as an starting point on joining Asterisk. On the second block we will proceed with a development contribution to the Asterisk project. We will have several options in the form that we do the contribution, such as solving bugs, developing new functionalities or start an Asterisk satellite project. The type of contribution will depend on the needs of the project on that moment.

Urban design proposes for the norwegian cities

Alta is the biggest city in the country of Finnmark. The area of study, Bossekop, is situated 4km from the city centre. It has some commercial areas, offices, hotels and housing, mostly single family housing. The most important Norwegian road, E6 goes through Bossekop, there for it has a big traffic flow. The concept builds on the idea of two axis, one local leading from the local sports development area into the centre core, and one on a higher level, the E6. In Bodø, after analysing carefully the surroundings we reached the conclusion that it is posssible to conserve a lot of the green as well as offering the municipalities the chance to develop with several housing typologies. Nature should be preserved and with this connect directly the mountain to the sea, using the existing creek to make the water connection. In order to keep a big part of this land untouched, we suggest that the rest of the site can be developed quite densely in one of the areas and then continuously fading out in direction of the mountains. Finnsnes is an important communication point for the region with its good connections. In that way it is becoming a central point for commerce and leisure. The concept is based on the wish from the municipality of Lenvik to look upon the city’s connection to the surrounding sea and green areas, together with the wish to make the pedestrian access better and the car traffic lighter., and in that way improve the conditions in the city

A hybrid method for sag source location in power network

The work presented in this paper belongs to the power quality knowledge area and deals with the voltage sags in power transmission and distribution systems. Propagating throughout the power network, voltage sags can cause plenty of problems for domestic and industrial loads that can financially cost a lot. To impose penalties to responsible party and to improve monitoring and mitigation strategies, sags must be located in the power network. With such a worthwhile objective, this paper comes up with a new method for associating a sag waveform with its origin in transmission and distribution networks. It solves this problem through developing hybrid methods which hire multiway principal component analysis (MPCA) as a dimension reduction tool. MPCA reexpresses sag waveforms in a new subspace just in a few scores. We train some well-known classifiers with these scores and exploit them for classification of future sags. The capabilities of the proposed method for dimension reduction and classification are examined using the real data gathered from three substations in Catalonia, Spain. The obtained classification rates certify the goodness and powerfulness of the developed hybrid methods as brand-new tools for sag classification

L'altra cara del progrés. Estudi multidimensional sobre les conseqüències de les activitats d'explotació intensiva sobre l'ecosistema del manglar i les activitats econòmiques tradicionals a la comunitat de Cumbe, Brasil

La localitat de Cumbe és una comunitat tradicional que es troba al tram baix del riu Jaguaribe situat a l’estat de Ceará (Brasil) i que ha viscut centenars d’anys a partir de les pràctiques extractives que es porten a terme a l’ecosistema del manglar. Fa 20 anys va aparèixer a la regió una nova economia basada en l’explotació intensiva. L’aqüicultura destinada a la cria de gamba està causant danys severs a l’ecosistema del manglar i perjudicant greument la font d’ingressos de moltes famílies, amenaçant la continuïtat de l’economia local i deteriorant la qualitat de vida de les persones que s’hi dediquen. A partir de l’observació personal i la immersió en aquesta societat s’ha detectat que l’economia tradicional està infravalorada pel govern i per les persones que donen suport a l’aqüicultura. Per aquest motiu s’han creat una sèrie d’indicadors, a partir de les activitats extractives del cranc, que posin en valor aquesta economia tradicional envers la nova economia emergent.

Technologies de procédé et de contrôle pour réduire la teneur en sel du jambon sec et des saucissons

Dans certains pays européens, les produits carnés élaborés peuvent représenter près de 20% de la consommation journalière de sodium. De ce fait, les industries de la viande tentent de réduire la teneur en sel dans les produits carnés pour répondre, d’une part aux attentes des consommateurs et d’autre part aux demandes des autorités sanitaires. Le système Quick‐Dry‐Slice process (QDS®), couplé avec l’utilisation de sels substituant le chlorure de sodium (NaCl), a permis de fabriquer, avec succès, des saucisses fermentées à basse teneur en sel en réduisant le cycle de fabrication et sans ajout de NaCl supplémentaire. Les technologies de mesure en ligne non destructives, comme les rayons X et l’induction électromagnétique, permettent de classifier les jambons frais suivant leur teneur en gras, un paramètre crucial pour adapter la durée de l’étape de salaison. La technologie des rayons X peut aussi être utilisée pour estimer la quantité de sel incorporée pendant la salaison. L’information relative aux teneurs en sel et en gras est importante pour optimiser le processus d’élaboration du jambon sec en réduisant la variabilité de la teneur en sel entre les lots et dans un même lot, mais aussi pour réduire la teneur en sel du produit final. D’autres technologies comme la spectroscopie en proche infrarouge (NIRS) ou spectroscopie microondes sont aussi utiles pour contrôler le processus d’élaboration et pour caractériser et classifier les produits carnés élaborés, selon leur teneur en sel. La plupart de ces technologies peuvent être facilement appliquées en ligne dans l’industrie afin de contrôler le processus de fabrication et d’obtenir ainsi des produits carnés présentant les caractéristiques recherchées.

Networks of PhD Students and Academic Performance: A Comparison across Countries

In this article we compare regression models obtained to predict PhD students’ academic performance in the universities of Girona (Spain) and Slovenia. Explanatory variables are characteristics of PhD student’s research group understood as an egocentered social network, background and attitudinal characteristics of the PhD students and some characteristics of the supervisors. Academic performance was measured by the weighted number of publications. Two web questionnaires were designed, one for PhD students and one for their supervisors and other research group members. Most of the variables were easily comparable across universities due to the careful translation procedure and pre-tests. When direct comparison was notpossible we created comparable indicators. We used a regression model in which the country was introduced as a dummy coded variable including all possible interaction effects. The optimal transformations of the main and interaction variables are discussed. Some differences between Slovenian and Girona universities emerge. Some variables like supervisor’s performance and motivation for autonomy prior to starting the PhD have the same positive effect on the PhD student’s performance in both countries. On the other hand, variables like too close supervision by the supervisor and having children have a negative influence in both countries. However, we find differences between countries when we observe the motivation for research prior to starting the PhD which increases performance in Slovenia but not in Girona. As regards network variables, frequency of supervisor advice increases performance in Slovenia and decreases it in Girona. The negative effect in Girona could be explained by the fact that additional contacts of the PhD student with his/her supervisor might indicate a higher workload in addition to or instead of a better advice about the dissertation. The number of external student’s advice relationships and social support mean contact intensity are not significant in Girona, but they have a negative effect in Slovenia. We might explain the negative effect of external advice relationships in Slovenia by saying that a lot of external advice may actually result from a lack of the more relevant internal advice

Implementació d'una interfície per al control de traçabilitat en el ERP Microsoft Dynamics AX

Implementació d'una interfície per a dur un control de traçabilitat de diversos productes, mitjançant el codi d'article i el número de lot. Obtenint així la història d'aquests, és a dir, obtenint informació sobre l'origen, el destí i els processos de transformació que han sofert.

Eduard Toldrà : sis sonets per a violí i piano

Eduard Toldrà i Soler fou una persona important i significativa per a la societat catalana de principis del segle XX. La seva vida musical és increïblement ampla, ja que abasta facetes de violinista, compositor, director i pedagog. A més, Toldrà va estar sempre immers en la cultura catalana, en l'art en general, i en particular en la poesia. És per aquest motiu que trobem tanta poesia en la seva música. En el següent treball aprofundeixo en l'estudi d'una de les seves obres, Sis Sonets per a violí i piano. A través de l'anàlisi d'aquestes sis peces, coneixerem també al personatge d'Eduard Toldrà i el seu context cultural. Veurem que la seva música se situa fora dels trets estilístics “hispànics” de l'època i que, sota els tòpics de música española, les etiquetes no hi fan cap mena de justícia.

New Radicals and new applications of Dynamic Nuclear Polarization of biological systems

Dynamic Nuclear Polarization (DNP) is an emerging technique that could revolutionize the NMR study of small molecules at very low concentrations by the increase in sensitivity that results from transfer of polarization between electronic and nuclear spins. Although the underlying physics has been known for a long time, in the last few years there has been a lot of excitement on the chemistry and biology NMR community caused by the demonstration that the highly polarized nuclei that are prepared in solid state at very low temperatures (1-2 K) could be rapidly transferred to liquid samples at room temperature and studied in solution by conventional NMR techniques. In favorable cases several order of magnitude increases in sensitivity have been achieved. The technique is now mature enough that a commercial instrument is available. The efficiency of DNP depends on two crucial aspects: i) the efficiency of the nuclear polarization process and ii) the efficiency of the transfer from the initial solid state to the fluid state in which NMR is measured. The preferred areas of application (iii) will be dictated by situations in which the low concentration of the sample or its intrinsic low receptivity are the limiting factors .