25 resultados para transient globa
Resumo:
The Wigner higher order moment spectra (WHOS)are defined as extensions of the Wigner-Ville distribution (WD)to higher order moment spectra domains. A general class oftime-frequency higher order moment spectra is also defined interms of arbitrary higher order moments of the signal as generalizations of the Cohen’s general class of time-frequency representations. The properties of the general class of time-frequency higher order moment spectra can be related to theproperties of WHOS which are, in fact, extensions of the properties of the WD. Discrete time and frequency Wigner higherorder moment spectra (DTF-WHOS) distributions are introduced for signal processing applications and are shown to beimplemented with two FFT-based algorithms. One applicationis presented where the Wigner bispectrum (WB), which is aWHOS in the third-order moment domain, is utilized for thedetection of transient signals embedded in noise. The WB iscompared with the WD in terms of simulation examples andanalysis of real sonar data. It is shown that better detectionschemes can be derived, in low signal-to-noise ratio, when theWB is applied.
Resumo:
Addition of a 50 mM mixture of l-arginine and l-glutamic acid (RE) is extensively used to improve protein solubility and stability, although the origin of the effect is not well understood. We present Small Angle X-ray Scattering (SAXS) and Nuclear Magnetic Resonance (NMR) results showing that RE induces protein compaction by collapsing flexible loops on the protein core. This is suggested to be a general mechanism preventing aggregation and improving resistance to proteases and to originate from the polyelectrolyte nature of RE. Molecular polyelectrolyte mixtures are expected to display long range correlation effects according to dressed interaction site theory. We hypothesize that perturbation of the RE solution by dissolved proteins is proportional to the volume occupied by the protein. As a consequence, loop collapse, minimizing the effective protein volume, is favored in the presence of RE.
Resumo:
We study the dynamics of shear-band formation and evolution using a simple rheological model. The description couples the local structure and viscosity to the applied shear stress. We consider in detail the Couette geometry, where the model is solved iteratively with the Navier-Stokes equation to obtain the time evolution of the local velocity and viscosity fields. It is found that the underlying reason for dynamic effects is the nonhomogeneous shear distribution, which is amplified due to a positive feedback between the flow field and the viscosity response of the shear thinning fluid. This offers a simple explanation for the recent observations of transient shear banding in time-dependent fluids. Extensions to more complicated rheological systems are considered.
Resumo:
Background: Chronic liver diseases (CLDs) are significant causes of death in adults in many countries and are usually diagnosed at late stages. Early detection may allow time for treatment to prevent disease progression. Objectives: The aim of this study was to assess the feasibility of screening for unrecognized CLDs in a primary care nurse consultancy and report findings from screening. Methods: Two experienced nurses in a primary care nurse consultancy were trained to perform transient elastography (TE). Subjects aged from 18 to 70 years were identified randomly from the health registry and invited to participate in a feasibility pilot study. Exclusion criteria were past or current history of liver diseases. Nurses collected demographic and clinical data and performed TE tests using Fibroscan tomeasure liver stiffness; a cutoff score of 6.8 kPa or greater was used as an indicator of the presence of CLD with fibrosis. Results: Accurate measurements were obtained in 495 of 502 participants (98.6%). Prevalence of elevated liver stiffness was observed in 28 of 495 subjects (5.7%). Compared to patients with normal liver stiffness, patients with increased liver stiffness were older, were more frequently male, and had higher frequency of metabolic syndrome. Nonalcoholic fatty liver was the most common cause of CLD. Discussion: Following training in procedures for conducting TE, nurses in a primary care clinic were able to detect unrecognized CLDs in presumably healthy subjects. Early detection of CLDs is feasible in primary care clinics and may facilitate identification of undiagnosed CLD in adults.
Resumo:
To describe the collective behavior of large ensembles of neurons in neuronal network, a kinetic theory description was developed in [13, 12], where a macroscopic representation of the network dynamics was directly derived from the microscopic dynamics of individual neurons, which are modeled by conductance-based, linear, integrate-and-fire point neurons. A diffusion approximation then led to a nonlinear Fokker-Planck equation for the probability density function of neuronal membrane potentials and synaptic conductances. In this work, we propose a deterministic numerical scheme for a Fokker-Planck model of an excitatory-only network. Our numerical solver allows us to obtain the time evolution of probability distribution functions, and thus, the evolution of all possible macroscopic quantities that are given by suitable moments of the probability density function. We show that this deterministic scheme is capable of capturing the bistability of stationary states observed in Monte Carlo simulations. Moreover, the transient behavior of the firing rates computed from the Fokker-Planck equation is analyzed in this bistable situation, where a bifurcation scenario, of asynchronous convergence towards stationary states, periodic synchronous solutions or damped oscillatory convergence towards stationary states, can be uncovered by increasing the strength of the excitatory coupling. Finally, the computation of moments of the probability distribution allows us to validate the applicability of a moment closure assumption used in [13] to further simplify the kinetic theory.
Resumo:
The work carried out during the 4 year research activity can be barely classified in two main lines. On the one hand, a considerable effort is taken to address issues related with the verification of multi-dimensional and transient solutions that are obtained by numerical simulations. Within the studied cases, we can consider cases of piston-cylinder ows within geometries similar to those of hermetic reciprocating compressors.This issue is mentioned in Part I. On the other hand, numerical simulations of different phenomena have been performed. More emphasis has been given to the natural convection ow within enclosures. This is explained in Part II. The case extensively studied has been the natural convection ow. The natural convection ow within enclosures has attracted the attention of many researchers due to its potential to model numerous applications of engineering interest, such as cooling of electronic devices, air ow in buildings, heat transfer in solar collectors, among others. The natural convection studies corresponding to the parallelepipedic enclosures can be classified into two elementary classes: i) heating from a horizontal wall (heating from below); ii) heating from a vertical wall. The characteristic example of the former case is the Rayleigh-B_enard ow, however this research is on the cavities heated from the side. This configuration is referred commonly as the differentially heated cavity.
Resumo:
Computer chips implementation technologies evolving to obtain more performance are increasing the probability of transient faults. As this probability grows and on-chip solutions are expensive or tend to degrade processor performance, the efforts to deal with these transient faults in higher levels (such as the operating system or even at the application level) are increasing. Mostly, these efforts are trying to avoid silent data corruptions using hardware, software and hybrid based techniques to add redundancy to detect the errors generated by the transient faults. This work presents our proposal to improve the robustness of applications with source code based transformation adding redundancy. Also, our proposal takes account of the tradeoff between the improved robustness and the overhead generated by the added redundancy.
Resumo:
El projecte s'ha centrat en el disseny i desenvolupament de laboratoris virtuals per a la docència del dispositius i mètodes de gestió d’energia. Això s’ha realitzat a dos nivells clarament diferenciats, el primer grup de laboratoris correspon als convertidors electrònics de potencia i el segon grup de laboratoris correspon a un conjunt de casos d’aplicacions concretes. En el primer grup es descriu el detall del funcionament dels diferents elements mentre que en el segon els descriuen les idees i conceptes bàsics de funcionament. Els laboratoris virtuals de convertidors electrònics de potència inclouen el convertidor elevador (boost), el convertidor reductor (buck), i convertidors acobladors magnèticament. Aquestes permeten estudiar el comportament dinàmica des d’un punt de vista commutat o bé promitjat, les aplicacions incorporen també la possibilitat de sintonitzar els controladors. Aquestes aplicacions han estat desenvolupades per ser un complement per les sessions de pràctiques presencials. Els laboratoris virtuals d’aplicacions, inclouen els sistema de transport metropolità, el vehicle híbrid i els sistemes de gestió de talls transitoris en el subministrament d’energia principalment. Aquestes laboratoris permeten introduir els estudiants de forma qualitativa en els diferents conceptes i tècniques emprades en els sistemes de generació, transport i transformació d’energia. Totes les aplicacions han estat desenvolupades emprant Easy JAVA Simulations, aquesta eina permet desenvolupar laboratoris multiplataforma fàcilment distribuïbles a través d’internet.
Resumo:
Projecte de recerca elaborat a partir d’una estada a la Universidad Politécnica de Madrid, Espanya, entre setembre i o desembre del 2007. Actualment la indústria aeroespacial i aeronàutica té com prioritat millorar la fiabilitat de las seves estructures a través del desenvolupament de nous sistemes per a la monitorització i detecció d’impactes. Hi ha diverses tècniques potencialment útils, i la seva aplicabilitat en una situació particular depèn críticament de la mida del defecte que permet l’estructura. Qualsevol defecte canviarà la resposta vibratòria de l’element estructural, així com el transitori de l’ona que es propaga per l’estructura elàstica. Correlacionar aquests canvis, que poden ser detectats experimentalment amb l’ocurrència del defecte, la seva localització i quantificació, és un problema molt complex. Aquest treball explora l’ús de l'Anàlisis de Components Principals (Principal Component Analysis - PCA-) basat en la formulació dels estadístics T2 i Q per tal de detectar i distingir els defectes a l'estructura, tot correlacionant els seus canvis a la resposta vibratòria. L’estructura utilitzada per l’estudi és l’ala d’una turbina d’un avió comercial. Aquesta ala s’excita en un extrem utilitzant un vibrador, i a la qual s'han adherit set sensors PZT a la superfície. S'aplica un senyal conegut i s'analitzen les respostes. Es construeix un model PCA utilitzant dades de l’estructura sense defecte. Per tal de provar el model, s'adhereix un tros d’alumini en quatre posicions diferents. Les dades dels assajos de l'estructura amb defecte es projecten sobre el model. Les components principals i les distàncies de Q-residual i T2-Hotelling s'utilitzaran per a l'anàlisi de les incidències. Q-residual indica com de bé s'adiu cadascuna de les mostres al model PCA, ja que és una mesura de la diferència, o residu, entre la mostra i la seva projecció sobre les components principals retingudes en el model. La distància T2-Hotelling és una mesura de la variació de cada mostra dins del model PCA, o el que vindria a ser el mateix, la distància al centre del model PCA.
Resumo:
Report for the scientific sojourn carried out at the l’ Institute for Computational Molecular Science of the Temple University, United States, from 2010 to 2012. Two-component systems (TCS) are used by pathogenic bacteria to sense the environment within a host and activate mechanisms related to virulence and antimicrobial resistance. A prototypical example is the PhoQ/PhoP system, which is the major regulator of virulence in Salmonella. Hence, PhoQ is an attractive target for the design of new antibiotics against foodborne diseases. Inhibition of the PhoQ-mediated bacterial virulence does not result in growth inhibition, presenting less selective pressure for the generation of antibiotic resistance. Moreover, PhoQ is a histidine kinase (HK) and it is absent in animals. Nevertheless, the design of satisfactory HK inhibitors has been proven to be a challenge. To compete with the intracellular ATP concentrations, the affinity of a HK inhibidor must be in the micromolar-nanomolar range, whereas the current lead compounds have at best millimolar affinities. Moreover, the drug selectivity depends on the conformation of a highly variable loop, referred to as the “ATP-lid, which is difficult to study by X-Ray crystallography due to its flexibility. I have investigated the binding of different HK inhibitors to PhoQ. In particular, all-atom molecular dynamics simulations have been combined with enhanced sampling techniques in order to provide structural and dynamic information of the conformation of the ATP-lid. Transient interactions between these drugs and the ATP-lid have been identified and the free energy of the different binding modes has been estimated. The results obtained pinpoint the importance of protein flexibility in the HK-inhibitor binding, and constitute a first step in developing more potent and selective drugs. The computational resources of the hosting institution as well as the experience of the members of the group in drug binding and free energy methods have been crucial to carry out this work.