Contact melting of a three-dimensional phase change material on a flat substrate

In this paper a model is developed to describe the three dimensional contact melting process of a cuboid on a heated surface. The mathematical description involves two heat equations (one in the solid and one in the melt), the Navier-Stokes equations for the flow in the melt, a Stefan condition at the phase change interface and a force balance between the weight of the solid and the countering pressure in the melt. In the solid an optimised heat balance integral method is used to approximate the temperature. In the liquid the small aspect ratio allows the Navier-Stokes and heat equations to be simplified considerably so that the liquid pressure may be determined using an igenfunction expansion and finally the problem is reduced to solving three first order ordinary differential equations. Results are presented showing the evolution of the melting process. Further reductions to the system are made to provide simple guidelines concerning the process. Comparison of the solutions with experimental data on the melting of n-octadecane shows excellent agreement.

A Log-linear model of grain size influence on the geochemistry of sediments

Sediment composition is mainly controlled by the nature of the source rock(s), and chemical (weathering) and physical processes (mechanical crushing, abrasion, hydrodynamic sorting) during alteration and transport. Although the factors controlling these processes are conceptually well understood, detailed quantification of compositional changes induced by a single process are rare, as are examples where the effects of several processes can be distinguished. The present study was designed to characterize the role of mechanical crushing and sorting in the absence of chemical weathering. Twenty sediment samples were taken from Alpine glaciers that erode almost pure granitoid lithologies. For each sample, 11 grain-size fractions from granules to clay (ø grades &-1 to &9) were separated, and each fraction was analysed for its chemical composition.The presence of clear steps in the box-plots of all parts (in adequate ilr and clr scales) against ø is assumed to be explained by typical crystal size ranges for the relevant mineral phases. These scatter plots and the biplot suggest a splitting of the full grain size range into three groups: coarser than ø=4 (comparatively rich in SiO2, Na2O, K2O, Al2O3, and dominated by “felsic” minerals like quartz and feldspar), finer than ø=8 (comparatively rich in TiO2, MnO, MgO, Fe2O3, mostly related to “mafic” sheet silicates like biotite and chlorite), and intermediate grains sizes (4≤ø &8; comparatively rich in P2O5 and CaO, related to apatite, some feldspar).To further test the absence of chemical weathering, the observed compositions were regressed against three explanatory variables: a trend on grain size in ø scale, a step function for ø≥4, and another for ø≥8. The original hypothesis was that the trend could be identified with weathering effects, whereas each step function would highlight those minerals with biggest characteristic size at its lower end. Results suggest that this assumption is reasonable for the step function, but that besides weathering some other factors (different mechanical behavior of minerals) have also an important contribution to the trend.Key words: sediment, geochemistry, grain size, regression, step function

Selected configuration interaction with truncation energy error and application to the Ne atom

Selected configuration interaction (SCI) for atomic and molecular electronic structure calculations is reformulated in a general framework encompassing all CI methods. The linked cluster expansion is used as an intermediate device to approximate CI coefficients BK of disconnected configurations (those that can be expressed as products of combinations of singly and doubly excited ones) in terms of CI coefficients of lower-excited configurations where each K is a linear combination of configuration-state-functions (CSFs) over all degenerate elements of K. Disconnected configurations up to sextuply excited ones are selected by Brown's energy formula, ΔEK=(E-HKK)BK2/(1-BK2), with BK determined from coefficients of singly and doubly excited configurations. The truncation energy error from disconnected configurations, Δdis, is approximated by the sum of ΔEKS of all discarded Ks. The remaining (connected) configurations are selected by thresholds based on natural orbital concepts. Given a model CI space M, a usual upper bound ES is computed by CI in a selected space S, and EM=E S+ΔEdis+δE, where δE is a residual error which can be calculated by well-defined sensitivity analyses. An SCI calculation on Ne ground state featuring 1077 orbitals is presented. Convergence to within near spectroscopic accuracy (0.5 cm-1) is achieved in a model space M of 1.4× 109 CSFs (1.1 × 1012 determinants) containing up to quadruply excited CSFs. Accurate energy contributions of quintuples and sextuples in a model space of 6.5 × 1012 CSFs are obtained. The impact of SCI on various orbital methods is discussed. Since ΔEdis can readily be calculated for very large basis sets without the need of a CI calculation, it can be used to estimate the orbital basis incompleteness error. A method for precise and efficient evaluation of ES is taken up in a companion paper

Estimation of electronic coupling in π -stacked donor-bridge-acceptor systems: correction of the two-state model

Comparison of donor-acceptor electronic couplings calculated within two-state and three-state models suggests that the two-state treatment can provide unreliable estimates of Vda because of neglecting the multistate effects. We show that in most cases accurate values of the electronic coupling in a π stack, where donor and acceptor are separated by a bridging unit, can be obtained as Ṽ da = (E2 - E1) μ12 Rda + (2 E3 - E1 - E2) 2 μ13 μ23 Rda2, where E1, E2, and E3 are adiabatic energies of the ground, charge-transfer, and bridge states, respectively, μij is the transition dipole moments between the states i and j, and Rda is the distance between the planes of donor and acceptor. In this expression based on the generalized Mulliken-Hush approach, the first term corresponds to the coupling derived within a two-state model, whereas the second term is the superexchange correction accounting for the bridge effect. The formula is extended to bridges consisting of several subunits. The influence of the donor-acceptor energy mismatch on the excess charge distribution, adiabatic dipole and transition moments, and electronic couplings is examined. A diagnostic is developed to determine whether the two-state approach can be applied. Based on numerical results, we showed that the superexchange correction considerably improves estimates of the donor-acceptor coupling derived within a two-state approach. In most cases when the two-state scheme fails, the formula gives reliable results which are in good agreement (within 5%) with the data of the three-state generalized Mulliken-Hush model

Estimation of the viscoelastic properties of vessel walls using a computational model and Doppler ultrasound

Human arteries affected by atherosclerosis are characterized by altered wall viscoelastic properties. The possibility of noninvasively assessing arterial viscoelasticity in vivo would significantly contribute to the early diagnosis and prevention of this disease. This paper presents a noniterative technique to estimate the viscoelastic parameters of a vascular wall Zener model. The approach requires the simultaneous measurement of flow variations and wall displacements, which can be provided by suitable ultrasound Doppler instruments. Viscoelastic parameters are estimated by fitting the theoretical constitutive equations to the experimental measurements using an ARMA parameter approach. The accuracy and sensitivity of the proposed method are tested using reference data generated by numerical simulations of arterial pulsation in which the physiological conditions and the viscoelastic parameters of the model can be suitably varied. The estimated values quantitatively agree with the reference values, showing that the only parameter affected by changing the physiological conditions is viscosity, whose relative error was about 27% even when a poor signal-to-noise ratio is simulated. Finally, the feasibility of the method is illustrated through three measurements made at different flow regimes on a cylindrical vessel phantom, yielding a parameter mean estimation error of 25%.

A Model of Collateral, Investment, and Adverse Selection

This paper characterizes the relationship between entrepreneurial wealth and aggregate investment under adverse selection. Its main finding is that such a relationship need not be monotonic. In particular, three results emerge from the analysis: (i) pooling equilibria, in which investment is independent of entrepreneurial wealth, are more likely to arise when entrepreneurial wealth is relatively low; (ii) separating equilibria, in which investment is increasing in entrepreneurial wealth, are most likely to arise when entrepreneurial wealth is relatively high and; (iii) for a given interest rate, an increase in entrepreneurial wealth may generate a discontinuous fall in investment.

The Three Horsemen of Growth: Plague, War and Urbanization in Early Modern Europe

How did Europe overtake China? We construct a simple Malthusian model with two sectors, and use it to explain how European per capita incomes and urbanization rates could surge ahead of Chinese ones. That living standards could exceed subsistence levels at all in a Malthusian setting should be surprising. Rising fertility and falling mortality ought to have reversed any gains. We show that productivity growth in Europe can only explain a small fraction of rising living standards. Population dynamics - changes of the birth and death schedules - were far more important drivers of the longrun Malthusian equilibrium. The Black Death raised wages substantially, creating important knock-on effects. Because of Engel's Law, demand for urban products increased, raising urban wages and attracting migrants from rural areas. European cities were unhealthy, especially compared to Far Eastern ones. Urbanization pushed up aggregate death rates. This effect was reinforced by more frequent wars (fed by city wealth) and disease spread by trade. Thus, higher wages themselves reduced population pressure. Without technological change, our model can account for the sharp rise in European urbanization as well as permanently higher per capita incomes. We complement our calibration exercise with a detailed analysis of intra-European growth in the early modern period. Using a panel of European states in the period 1300-1700, we show that war frequency can explain a good share of the divergent fortunes within Europe.

A multi-objective model for a multi-period distribution management problem

The problems arising in commercial distribution are complex and involve several players and decision levels. One important decision is relatedwith the design of the routes to distribute the products, in an efficient and inexpensive way.This article deals with a complex vehicle routing problem that can beseen as a new extension of the basic vehicle routing problem. The proposed model is a multi-objective combinatorial optimization problemthat considers three objectives and multiple periods, which models in a closer way the real distribution problems. The first objective is costminimization, the second is balancing work levels and the third is amarketing objective. An application of the model on a small example, with5 clients and 3 days, is presented. The results of the model show the complexity of solving multi-objective combinatorial optimization problems and the contradiction between the several distribution management objective.

Hybrid consumption paths in the attribute space: A model and application with scanner data

This paper presents and estimates a dynamic choice model in the attribute space considering rational consumers. In light of the evidence of several state-dependence patterns, the standard attribute-based model is extended by considering a general utility function where pure inertia and pure variety-seeking behaviors can be explained in the model as particular linear cases. The dynamics of the model are fully characterized by standard dynamic programming techniques. The model presents a stationary consumption pattern that can be inertial, where the consumer only buys one product, or a variety-seeking one, where the consumer shifts among varied products.We run some simulations to analyze the consumption paths out of the steady state. Underthe hybrid utility assumption, the consumer behaves inertially among the unfamiliar brandsfor several periods, eventually switching to a variety-seeking behavior when the stationary levels are approached. An empirical analysis is run using scanner databases for three different product categories: fabric softener, saltine cracker, and catsup. Non-linear specifications provide the best fit of the data, as hybrid functional forms are found in all the product categories for most attributes and segments. These results reveal the statistical superiority of the non-linear structure and confirm the gradual trend to seek variety as the level of familiarity with the purchased items increases.

Social preferences: Some simple tests and a new model

Departures from pure self interest in economic experiments have recently inspired models of "social preferences". We conduct experiments on simple two-person and three-person games with binary choices that test these theories more directly than the array of games conventionally considered. Our experiments show strong support for the prevalence of "quasi-maximin" preferences: People sacrifice to increase the payoffs for all recipients, but especially for the lowest-payoff recipients. People are also motivated by reciprocity: While people are reluctant to sacrifice to reciprocate good or bad behavior beyond what they would sacrifice for neutral parties, they withdraw willingness to sacrifice to achieve a fair outcome when others are themselves unwilling to sacrifice. Some participants are averse to getting different payoffs than others, but based on our experiments and reinterpretation of previous experiments we argue that behavior that has been presented as "difference aversion" in recent papers is actually a combination of reciprocal and quasi-maximin motivations. We formulate a model in which each player is willing to sacrifice to allocate the quasi-maximin allocation only to those players also believed to be pursuing the quasi-maximin allocation, and may sacrifice to punish unfair players.

A model of collateral, investment and adverse selection

This paper characterizes the relationship between entrepreneurial wealth and aggregate investmentunder adverse selection. Its main finding is that such a relationship need not bemonotonic. In particular, three results emerge from the analysis: (i) pooling equilibria, in whichinvestment is independent of entrepreneurial wealth, are more likely to arise when entrepreneurialwealth is relatively low; (ii) separating equilibria, in which investment is increasing inentrepreneurial wealth, are most likely to arise when entrepreneurial wealth is relatively highand; (iii) for a given interest rate, an increase in entrepreneurial wealth may generate a discontinuousfall in investment.

The three horsemen of riches: Plague, war and urbanization in early modern Europe

How did Europe escape the "Iron Law of Wages?" We construct a simple Malthusian model withtwo sectors and multiple steady states, and use it to explain why European per capita incomes andurbanization rates increased during the period 1350-1700. Productivity growth can only explain a smallfraction of the rise in output per capita. Population dynamics changes of the birth and death schedules were far more important determinants of steady states. We show how a major shock to population cantrigger a transition to a new steady state with higher per-capita income. The Black Death was such ashock, raising wages substantially. Because of Engel's Law, demand for urban products increased, andurban centers grew in size. European cities were unhealthy, and rising urbanization pushed up aggregatedeath rates. This effect was reinforced by diseases spread through war, financed by higher tax revenues.In addition, rising trade also spread diseases. In this way higher wages themselves reduced populationpressure. We show in a calibration exercise that our model can account for the sustained rise in Europeanurbanization as well as permanently higher per capita incomes in 1700, without technological change.Wars contributed importantly to the "Rise of Europe", even if they had negative short-run effects. We thustrace Europe s precocious rise to economic riches to interactions of the plague shock with the belligerentpolitical environment and the nature of cities.

Extremal climatic states simulated by a 2-dimensional model Part I: Sensitivity of the model and present state

The criterion, based on the thermodynamics theory, that the climatic system tends to extremizesome function has suggested several studies. In particular, special attention has been devoted to the possibility that the climate reaches an extremal rate of planetary entropy production.Due to both radiative and material effects contribute to total planetary entropy production,climatic simulations obtained at the extremal rates of total, radiative or material entropy production appear to be of interest in order to elucidate which of the three extremal assumptions behaves more similar to current data. In the present paper, these results have been obtainedby applying a 2-dimensional (2-Dim) horizontal energy balance box-model, with a few independent variables (surface temperature, cloud-cover and material heat fluxes). In addition, climatic simulations for current conditions by assuming a fixed cloud-cover have been obtained. Finally,sensitivity analyses for both variable and fixed cloud models have been carried out

Modelling of weather radar echoes from anomalous propagation using a hybrid parabolic equation method and NWP model data

Contamination of weather radar echoes by anomalous propagation (anaprop) mechanisms remains a serious issue in quality control of radar precipitation estimates. Although significant progress has been made identifying clutter due to anaprop there is no unique method that solves the question of data reliability without removing genuine data. The work described here relates to the development of a software application that uses a numerical weather prediction (NWP) model to obtain the temperature, humidity and pressure fields to calculate the three dimensional structure of the atmospheric refractive index structure, from which a physically based prediction of the incidence of clutter can be made. This technique can be used in conjunction with existing methods for clutter removal by modifying parameters of detectors or filters according to the physical evidence for anomalous propagation conditions. The parabolic equation method (PEM) is a well established technique for solving the equations for beam propagation in a non-uniformly stratified atmosphere, but although intrinsically very efficient, is not sufficiently fast to be practicable for near real-time modelling of clutter over the entire area observed by a typical weather radar. We demonstrate a fast hybrid PEM technique that is capable of providing acceptable results in conjunction with a high-resolution terrain elevation model, using a standard desktop personal computer. We discuss the performance of the method and approaches for the improvement of the model profiles in the lowest levels of the troposphere.

Crítical memory of three school debates

As reflection on the education in the Escola Elisava and of the design education in general, the intervention tries to treat the debates that for many years had existed tacitly between the different academic classes, showing the critical situation that it supposes - especially for the fragile design - that one any of these classes influences over the others. From middle of the 90s, the progressive adoption generalized in the higher education of the Anglo-Saxon model ¿with clear predominance of the institutional thing¿ has showed the indicative character of the critique that here is exhibited.