Design of Novel Frequency Generation Circuit with Application to Ultra-Wideband Distributed Oscillators

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.

Signalling and Productivity Effects of Overeducation: Is It Really a Waste of Resources?

Overeducation raises concerns that governments may be overinvesting in education. To inform the debate, this paper studies the impact of overeducation on productivity. We advance the literature by considering that returns to overeducation may be due both to productivity and signalling effects. To disentangle both effects, we apply Wolpin’s (1977) methodology and compare the rates of return of screened (employed) and unscreened (selfemployed) workers. To overcome well-known endogeneity problems due to unobserved heterogeneity, we estimate a panel with individual and employment-status fixed effects. Our results show that signalling effects are relevant and that overeducation does not carry a productivity penalty. Keywords: Overeducation, signalling model, human capital model, unobserved heterogeneity. JEL classification: I20, J24, J31.

A Tool for optimum design of Waste Water Treatment Plants under uncertainty

L’objectiu principal és presentar un nou prototipus d’eina per al disseny de les plantes de tractament d’aigües residuals utilitzant models mecànics dinàmics quantificant la incertesa

Energy dispersive X-Ray fluorescence : measuring elements in solid and liquid matrices

The subject of this project is about “Energy Dispersive X-Ray Fluorescence ” (EDXRF).This technique can be used for a tremendous variety of elemental analysis applications.It provides one of the simplest, most accurate and most economic analytical methods for thedetermination of the chemical composition of many types of materials.The purposes of this project are:- To give some basic information about Energy Dispersive X-ray Fluorescence.- To perform qualitative and quantitative analysis of different samples (water-dissolutions,powders, oils,..) in order to define the sensitivity and detection limits of the equipment.- To make a comprehensive and easy-to-use manual of the ‘ARL QUANT’X EnergyDispersive X-Ray Fluorescence’ apparatus

Management of corn stalk waste as reinforcement for polypropylene injection moulded composites

The main objective of this study was the management of corn stalk waste as reinforcement for polypropylene (PP) injection moulded composites as an alternative to wood flour and fibers. In the first step, corn stalk waste was subjected to various treatments, and four different corn stalk derivatives (flour and fibers) able to be used as reinforcement of composite materials were prepared and characterized. These derivatives are corn stalk flour, thermo-mechanical, semi-chemical, and chemical fibers. They were characterized in terms of their yield, lignin content, Kappa number, fiber length/diameter ratio, fines, coarseness, viscosity, and the length at the break of a standard sheet of paper. Results showed that the corn stalk derivatives have different physico-chemical properties. In the second step, the prepared flour and fibers were explored as a reinforcing element for PP composites. Coupled and non-coupled PP composites were prepared and tested for tensile properties. For overall trend, with the addition of a coupling agent, tensile properties of composites significantly improved, as compared with non-coupled samples. In addition, a morphological study revealed the positive effect of the coupling agent on the interfacial bonding. The composites prepared with semichemical fiber gave better results in comparison with the rest of the corn stalk derivatives due to its chemical characteristics

Cultural self-identification(s) and personal social networks among first and second-generation immigrants

L’estudi examina les relacions entre (1) les xarxes socials personals de la població immigrant resident a Barcelona i (2) les seves identitats culturals múltiples. L’objectiu principal de l’estudi és entendre com el contingut i l’estructura de les relacions socials dels immigrants facilita o dificulta (1) tenir un sentiment de pertinença a les noves cultures d’acollida, la catalana i la espanyola, i (2) la integració d’aquestes noves identitats socioculturals amb la seva identitat d’origen en una nova identitat bicultural cohesiva. El nostre plantejament inicial era que els immigrants amb xarxes socials més diverses des del punt de vista de la seva composició cultural tindrien més recursos socials i experiències cognitives més diverses , factors que afavoreixen les identificacions múltiples i la participació cívica. Els resultats de l’estudi mostren que el grau d’identificació dels participants amb la seva cultura ètnica o d’origen és força alt i, en certa mesura, més alt en comparació amb les cultures d’acollida ( catalana, cívica i espanyola). Tanmateix, el vincle dels participants amb les cultures d’acollida (p. ex., la cultura catalana) és prou rellevant per a indicar una orientació bicultural (catalana i ètnica). Les anàlisis de correlacions revelen que sentir-se català no impedeix sentir-se part de la comunitat etnocultural d’origen. A més, existeix una interrelació entre l'orientació cultural catalana i la identificació amb les comunitats cíviques locals. De la mateixa manera, tenir competències en llengua catalana no va en detriment de les competències en llengua castellana. Les anàlisis també mostren que factors com l’orientació cultural catalana, l’ús del català i la identificació amb la cultura catalana tenen una correlació positiva amb el grau de chohesio de la indentitat bicultural, afavoreixen el benestar psicològic i disminueixen l’estrès aculturatiu. L’anàlisi de les xarxes socials mostra que la identificació amb la cultura catalana, l’orientació cultural catalana i la integració de la identitat són factors clau per tenir xarxes socials més diverses des del punt de vista ètnic i lingüístic, amb menys membres del col•lectiu d’origen, i amb subgrups o “cliques” culturalment més heterogenis. La identificació espanyola també prediu, en mesura més reduïda, la diversitat de les xarxes. Els nostres resultats contribueixen a la recerca actual i les teories sobre interculturalitat i identitat cultural.

Automatic generation of active coordinates for quantum dynamics calculations: application to the dynamics of benzene photochemistry

A new practical method to generate a subspace of active coordinates for quantum dynamics calculations is presented. These reduced coordinates are obtained as the normal modes of an analytical quadratic representation of the energy difference between excited and ground states within the complete active space self-consistent field method. At the Franck-Condon point, the largest negative eigenvalues of this Hessian correspond to the photoactive modes: those that reduce the energy difference and lead to the conical intersection; eigenvalues close to 0 correspond to bath modes, while modes with large positive eigenvalues are photoinactive vibrations, which increase the energy difference. The efficacy of quantum dynamics run in the subspace of the photoactive modes is illustrated with the photochemistry of benzene, where theoretical simulations are designed to assist optimal control experiments