Effects of the epitaxial layer thickness on the noise properties of Schottky barrier diodes

An analytical theory to describe the combined effects of the epitaxial layer thickness and the ohmic contact on the noise properties of Schottky barrier diodes is presented. The theory, which provides information on both the local and the global noise properties, takes into account the finite size of the epitaxial layer and the effects of the back ohmic contact, and applies to the whole range of applied bias. It is shown that by scaling down the epitaxial layer thickness, the current regime in which the noise temperature displays a shot-noise-like behavior increases at the cost of reducing the current range in which the thermal-noise-like behavior dominates. This improvement in noise temperature is limited by the effects of the ohmic contact, which appear for large currents. The theory is formulated on general trends, allowing its application to the noise analysis of other semiconductor devices operating under strongly inhomogeneous distributions of the electric field and charge concentrations.

Local noise analysis of a Schottky contact: combined thermionic-emissiondiffusion theory

A theoretical model for the noise properties of Schottky barrier diodes in the framework of the thermionic-emission¿diffusion theory is presented. The theory incorporates both the noise inducedby the diffusion of carriers through the semiconductor and the noise induced by the thermionicemission of carriers across the metal¿semiconductor interface. Closed analytical formulas arederived for the junction resistance, series resistance, and contributions to the net noise localized indifferent space regions of the diode, all valid in the whole range of applied biases. An additionalcontribution to the voltage-noise spectral density is identified, whose origin may be traced back tothe cross correlation between the voltage-noise sources associated with the junction resistance andthose for the series resistance. It is argued that an inclusion of the cross-correlation term as a newelement in the existing equivalent circuit models of Schottky diodes could explain the discrepanciesbetween these models and experimental measurements or Monte Carlo simulations.

Impedance field and noise of submicrometer n+ nn+ diodes: analytical approach

A theoretical model for the noise properties of n+nn+ diodes in the drift-diffusion framework is presented. In contrast with previous approaches, our model incorporates both the drift and diffusive parts of the current under inhomogeneous and hot-carrier conditions. Closed analytical expressions describing the transport and noise characteristics of submicrometer n+nn+ diodes, in which the diode base (n part) and the contacts (n+ parts) are coupled in a self-consistent way, are obtained

Effects of the epitaxial layer thickness on the noise properties of Schottky barrier diodes

An analytical theory to describe the combined effects of the epitaxial layer thickness and the ohmic contact on the noise properties of Schottky barrier diodes is presented. The theory, which provides information on both the local and the global noise properties, takes into account the finite size of the epitaxial layer and the effects of the back ohmic contact, and applies to the whole range of applied bias. It is shown that by scaling down the epitaxial layer thickness, the current regime in which the noise temperature displays a shot-noise-like behavior increases at the cost of reducing the current range in which the thermal-noise-like behavior dominates. This improvement in noise temperature is limited by the effects of the ohmic contact, which appear for large currents. The theory is formulated on general trends, allowing its application to the noise analysis of other semiconductor devices operating under strongly inhomogeneous distributions of the electric field and charge concentrations.

Soporte geoespacial para modelos de distribución de especies (I): generalización del mapa de vegetación del Montseny apoyada en información de imágenes de satélite

Los mapas de vegetación son a menudo utilizados como proxis de una estratificación de hábitats para generar distribuciones geográficas contínuas de organismos a partir de datos discretos mediante modelos multi-variantes. Sin embargo, los mapas de vegetación suelen ser poco apropiados para ser directamente aplicados a este fin, pues sus categorías no se concibieron con la intención de corresponder a tipos de hábitat. En este artículo presentamos y aplicamos el método de Agrupamiento por Doble Criterio para generalizar un mapa de vegetación extraordinariamente detallado (350 clases) del Parque Natural del Montseny (Cataluña) en categorías que mantienen la coherencia tanto desde el punto de vista estructural (a través de una matriz de disimilaridad espectral calculada mediante una imágen del satélite SPOT-5) como en términos de vegetación (gracias a una matriz de disimilaridad calculada mediante propiedades de vegetación deducidas de la leyenda jerárquica del mapa). El método simplifica de 114 a 18 clases el 67% del área de estudio. Añadiendo otras agregaciones más triviales basadas exclusivamente en criterios de cubierta de suelo, el 73% del área de estudio pasa de 167 a 25 categorías. Como valor añadido, el método identifica el 10% de los polígonos originales como anómalos (a partir de comparar las propiedades espectrales de cada polígono con el resto de los de su clases), lo que implica cambios en la cubierta entre las fechas del soporte utilizado para generar el mapa original y la imagen de satélite, o errores en la producción de éste.

Control of optical fields and single photon emitters by advanced nanoantenna structures

The control of optical fields on the nanometre scale is becoming an increasingly important tool in many fields, ranging from channelling light delivery in photovoltaics and light emitting diodes to increasing the sensitivity of chemical sensors to single molecule levels. The ability to design and manipulate light fields with specific frequency and space characteristics is explored in this project. We present an alternative realisation of Extraordinary Optical Transmission (EOT) that requires only a single aperture and a coupled waveguide. We show how this waveguide-resonant EOT improves the transmissivity of single apertures. An important technique in imaging is Near-Field Scanning Optical Microscopy (NSOM); we show how waveguide-resonant EOT and the novel probe design assist in improving the efficiency of NSOM probes by two orders of magnitude, and allow the imaging of single molecules with an optical resolution of as good as 50 nm. We show how optical antennas are fabricated into the apex of sharp tips and can be used in a near-field configuration.

Application of compositional data analysis to geochemical data of marine sediments

In an earlier investigation (Burger et al., 2000) five sediment cores near the RodriguesTriple Junction in the Indian Ocean were studied applying classical statistical methods(fuzzy c-means clustering, linear mixing model, principal component analysis) for theextraction of endmembers and evaluating the spatial and temporal variation ofgeochemical signals. Three main factors of sedimentation were expected by the marinegeologists: a volcano-genetic, a hydro-hydrothermal and an ultra-basic factor. Thedisplay of fuzzy membership values and/or factor scores versus depth providedconsistent results for two factors only; the ultra-basic component could not beidentified. The reason for this may be that only traditional statistical methods wereapplied, i.e. the untransformed components were used and the cosine-theta coefficient assimilarity measure.During the last decade considerable progress in compositional data analysis was madeand many case studies were published using new tools for exploratory analysis of thesedata. Therefore it makes sense to check if the application of suitable data transformations,reduction of the D-part simplex to two or three factors and visualinterpretation of the factor scores would lead to a revision of earlier results and toanswers to open questions . In this paper we follow the lines of a paper of R. Tolosana-Delgado et al. (2005) starting with a problem-oriented interpretation of the biplotscattergram, extracting compositional factors, ilr-transformation of the components andvisualization of the factor scores in a spatial context: The compositional factors will beplotted versus depth (time) of the core samples in order to facilitate the identification ofthe expected sources of the sedimentary process.Kew words: compositional data analysis, biplot, deep sea sediments

Efecto de la suplementación con ácidos grasos de cadena media sobre la evolución de peso en lechones con poco peso al nacimiento

La evolución de peso en los períodos de lactación y transición de 583 lechones fue estudiada mediante un análisis estadístico, evaluando el efecto de la suplementación con ácidos grasos de cadena media (AGCM) en lechones con poco peso al nacimiento. 188 de los 375 lechones que nacieron con un peso al nacimiento (PN) &1250 g recibieron 3mL de AGCM cada 24 h durante los primeros 3 días de vida; su peso medio al destete (día 28) fue inferior respecto al grupo control (lechones no suplementados) (-114,17 g). No obstante, 106 de los 180 lechones nacidos con un PN &1000 g fueron suplementados, y su peso medio al destete y a finales de transición (día 63) fue superior respecto al grupo control (destete: +315,16 g; día 63: +775,47 g). Finalmente, los lechones suplementados con PN&800 g tuvieron los peores resultados: su diferencia de peso medio al destete fue de -177,58 g respecto al grupo control. Por lo tanto, en esta prueba fueron estudiados los lechones con un PN entre 800 y 999 g porque el grupo suplementado al destete tuvo una diferencia de peso medio considerable respecto al grupo control:+511,58 g. Asimismo, considerando una probabilidad de error inferior a 0,05, no hubieron diferencias significativas en las diferentes categorías de PN analizadas. De todas maneras, es importante destacar el alto grado de significación en la suplementación con AGCM en lechones con PN entre 800 y 999g (P=0,059). Por otra parte, el PN del grupo suplementado con PN&1000 g fue inferior que el del grupo no suplementado con PN&1000 g; esta diferencia de PN fue significativa (P=0,004) y como consecuencia el grado de significación en la suplementación con AGCM en lechones con PN entre 800 y 999 g fue inferior al esperado. Además, en esta prueba se incluyeron algunos resultados generales y también un análisis simple de supervivencia, aunque no era el objetivo principal

Bounds on multisecant lines

The purpose of this paper is two fold. First, we give an upper bound on the orderof a multisecant line to an integral arithmetically Cohen-Macaulay subscheme in Pn of codimension two in terms of the Hilbert function. Secondly, we givean explicit description of the singular locus of the blow up of an arbitrary local ring at a complete intersection ideal. This description is used to refine standardlinking theorem. These results are tied together by the construction of sharp examples for the bound, which uses the linking theorems.

On the Chern classes and the Euler characteristic for nonsingular complete intersections

It is shown that Hirzebruch's result on the Chern classes of a complete intersection of nonsingular hypersurfaces in general position in PN(C), is also valid for any nonsingular complete intersection. Then rela- tions between Euler characteristic, class and Milnor number are pointed out.

Oscillatory magnetic tweezers based on ferromagnetic beads and simple coaxial coils

We report the design and validation of simple magnetic tweezers for oscillating ferromagnetic beads in the piconewton and nanometer scales. The system is based on a single pair of coaxial coils operating in two sequential modes: permanent magnetization of the beads through a large and brief pulse of magnetic field and generation of magnetic gradients to produce uniaxial oscillatory forces. By using this two step method, the magnetic moment of the beads remains constant during measurements. Therefore, the applied force can be computed and varies linearly with the driving signal. No feedback control is required to produce well defined force oscillations over a wide bandwidth. The design of the coils was optimized to obtain high magnetic fields (280 mT) and gradients (2 T/m) with high homogeneity (5% variation) within the sample. The magnetic tweezers were implemented in an inverted optical microscope with a videomicroscopy-based multiparticle tracking system. The apparatus was validated with 4.5 ¿m magnetite beads obtaining forces up to ~2 pN and subnanometer resolution. The applicability of the device includes microrheology of biopolymer and cell cytoplasm, molecular mechanics, and mechanotransduction in living cells.

A gated single-photon avalanche diode array fabricated in a conventional CMOS process for triggered systems

A bidimensional array based on single-photon avalanche diodes for triggered imaging systems is presented. The diodes are operated in the gated mode of acquisition to reduce the probability to detect noise counts interfering with photon arrival events. In addition, low reverse bias overvoltages are used to lessen the dark count rate. Experimental results demonstrate that the prototype fabricated with a standard HV-CMOS process gets rid of afterpulses and offers a reduced dark count probability by applying the proposed modes of operation. The detector exhibits a dynamic range of 15 bits with short gated"on" periods of 10ns and a reverse bias overvoltage of 1.0V.

Intense green-yellow electroluminescence from Tb+-implanted silicon-rich silicon nitride/oxide light emitting devices

High optical power density of 0.5 mW/cm2, external quantum efficiency of 0.1%, and population inversion of 7% are reported from Tb+-implanted silicon-rich silicon nitride/oxide light emitting devices. Electrical and electroluminescence mechanisms in these devices were investigated. The excitation cross section for the 543 nm Tb3+ emission was estimated under electrical pumping, resulting in a value of 8.2 × 10−14 cm2, which is one order of magnitude larger than one reported for Tb3+:SiO2 light emitting devices. These results demonstrate the potentiality of Tb+-implanted silicon nitride material for the development of integrated light sources compatible with Si technology.

Continuous phase shift of sinusoidal signals using injection locked oscillators

This work presents an alternative to generate continuous phase shift of sinusoidal signals based on the use of super harmonic injection locked oscillators (ILO). The proposed circuit is a second harmonic ILO with varactor diodes as tuning elements. In the locking state, by changing the varactor bias, a phase shift instead of a frequency shift is observed at the oscillator output. By combining two of these circuits, relative phases up to 90 could be achieved. Two prototypes of the circuit have been implemented and tested, a hybrid version working in the range of 200-300 MHz and a multichip module (MCM) version covering the 900¿1000 MHz band.

Systematic trends in self-consistent calculations of linear quantum wires

Systematic trends in the properties of a linear split-gate heterojunction are studied by solving iteratively the Poisson and Schrödinger equations for different gate potentials and temperatures. A two-dimensional approximation is presented that is much simpler in the numerical implementation and that accurately reproduces all significant trends. In deriving this approximation, we provide a rigorous and quantitative basis for the formulation of models that assumes a two-dimensional character for the electron gas at the junction.