Mean intrinsic tensile properties of stone groundwood fibers from softwood

Stone groundwood (SGW) is a fibrous matter commonly prepared in a high yield process, and mainly used for papermaking applications. In this work, the use of SGW fibers is explored as reinforcing element of polypropylene (PP) composites. Due to its chemical and superficial features, the use of coupling agents is needed for a good adhesion and stress transfer across the fiber-matrix interface. The intrinsic strength of the reinforcement is a key parameter to predict the mechanical properties of the composite and to perform an interface analysis. The main objective of the present work was the determination of the intrinsic tensile strength of stone groundwood fibers. Coupled and non-coupled PP composites from stone groundwood fibers were prepared. The influence of the surface morphology and the quality at interface on the final properties of the composite was analyzed and compared to that of fiberglass PP composites. The intrinsic tensile properties of stone groundwood fibers, as well as the fiber orientation factor and the interfacial shear strength of the current composites were determined

Tensile strength characteristics of polypropylene composites reinforced with stone groundwood fibers from softwood

The behavior of stone groundwood / polypropylene injection-molded composites was evaluated with and without coupling agent. Stone groundwood (SGW) is a fibrous material commonly prepared in a high yield process and mainly used for papermaking applications. In this work, the use of SGW fibers was explored as a reinforcing element of polypropylene (PP) composites. The surface charge density of the composite components was evaluated, as well as the fiber’s length and diameter inside the composite material. Two mixing extrusion processes were evaluated, and the use of a kinetic mixer, instead of an internal mixer, resulted in longer mean fiber lengths of the reinforcing fibers. On the other hand, the accessibility of surface hydroxyl groups of stone groundwood fibers was improved by treating the fibers with 5% of sodium hydroxide, resulting in a noticeable increase of the tensile strength of the composites, for a similar percentage of coupling agent. A new parameter called Fiber Tensile Strength Factor is defined and used as a baseline for the comparison of the properties of the different composite materials. Finally the competitiveness of stone groundwood / polypropylene / polypropylene-co-maleic anhydride system, which compared favorably to sized glass-fiber / polypropylene GF/PP and glass-fiber / polypropylene / polypropylene-co-maleic anhydride composite formulations, was quantified by means of the fiber tensile strength factor

Embedding objects into Matlab/Simulink for process supervision

This paper introduces how artificial intelligence technologies can be integrated into a known computer aided control system design (CACSD) framework, Matlab/Simulink, using an object oriented approach. The aim is to build a framework to aid supervisory systems analysis, design and implementation. The idea is to take advantage of an existing CACSD framework, Matlab/Simulink, so that engineers can proceed: first to design a control system, and then to design a straightforward supervisory system of the control system in the same framework. Thus, expert systems and qualitative reasoning tools are incorporated into this popular CACSD framework to develop a computer aided supervisory system design (CASSD) framework. Object-variables an introduced into Matlab/Simulink for sharing information between tools

Analysis and evaluation of techniques for the extraction of classes in the ontology learning process

This paper analyzes and evaluates, in the context of Ontology learning, some techniques to identify and extract candidate terms to classes of a taxonomy. Besides, this work points out some inconsistencies that may be occurring in the preprocessing of text corpus, and proposes techniques to obtain good terms candidate to classes of a taxonomy.

A multicase study for the evaluation of a pattern-based visual design process for collaborative learning

Collage is a pattern-based visual design authoring tool for the creation of collaborative learning scripts computationally modelled with IMS Learning Design (LD). The pattern-based visual approach aims to provide teachers with design ideas that are based on broadly accepted practices. Besides, it seeks hiding the LD notation so that teachers can easily create their own designs. The use of visual representations supports both the understanding of the design ideas and the usability of the authoring tool. This paper presents a multicase study comprising three different cases that evaluate the approach from different perspectives. The first case includes workshops where teachers use Collage. A second case implies the design of a scenario proposed by a third-party using related approaches. The third case analyzes a situation where students follow a design created with Collage. The cross-case analysis provides a global understanding of the possibilities and limitations of the pattern-based visual design approach.

Large-system analysis of a CDMA dynamic channel under a Markovian input process

We study the minimum mean square error (MMSE) and the multiuser efficiency η of large dynamic multiple access communication systems in which optimal multiuser detection is performed at the receiver as the number and the identities of active users is allowed to change at each transmission time. The system dynamics are ruled by a Markov model describing the evolution of the channel occupancy and a large-system analysis is performed when the number of observations grow large. Starting on the equivalent scalar channel and the fixed-point equation tying multiuser efficiency and MMSE, we extend it to the case of a dynamic channel, and derive lower and upper bounds for the MMSE (and, thus, for η as well) holding true in the limit of large signal–to–noise ratios and increasingly large observation time T.

Spinning welfare: The gains from process innovation in cotton and car production

Economists and economic historians want to know how much better life is today than in the past.Fifty years ago economic historians found surprisingly small gains from 19th century US railroads,while more recently economists have found relatively large gains from electricity, computers and cellphones. In each case the implicit or explicit assumption is that researchers were measuring the valueof a new good to society. In this paper we use the same techniques to find the value to society ofmaking existing goods cheaper. Henry Ford did not invent the car, and the inventors of mechanisedcotton spinning in the industrial revolution invented no new product. But both made existing productsdramatically cheaper, bringing them into the reach of many more consumers. That in turn haspotentially large welfare effects. We find that the consumer surplus of Henry Ford s production linewas around 2% by 1923, 15 years after Ford began to implement the moving assembly line, while themechanisation of cotton spinning was worth around 6% by 1820, 34 years after its initial invention.Both are large: of the same order of magnitude as consumer expenditure on these items, and as largeor larger than the value of the internet to consumers. On the social savings measure traditionally usedby economic historians, these process innovations were worth 15% and 18% respectively, makingthem more important than railroads. Our results remind us that process innovations can be at least asimportant for welfare and productivity as the invention of new products.

The role of institutions in the contractual process

Human beings increase their productivity by specializingtheir resources and exchanging their products. Theorganization of exchange is costly, however, becausespecialized activities need coordination and incentiveshave to be aligned. This work first describes how theseexchanges are organized in an institutional environment.It then focuses on the dual effect of this environment-as with any other specialized resource, institutions maybe used for expropriation purposes. They enjoyspecialization advantages in safeguarding exchange butthey also make possible new forms of opportunism,causing new costs of exchange. Three perverse tendenciesare identified:In the legal field, there is a surplus ofmandatory rules and, at the same time, a deficit in default rules. Second, courts activity is biased againstthe quasi-judicial role of the parties and the market. Third, Market enforcement is based on reputationalassets that are badly exposed to opportunism.