Niobium and rare earth minerals from the Virulundo carbonatite, Namibe, Angola

The Virulundo carbonatite in Angola, one of the biggest in the world, contains pyrochlore as an accessory mineral in all of the carbonatite units (calciocarbonatites, ferrocarbonatites, carbonatite breccias, trachytoids). The composition of the primary pyrochlore crystals is very close to fluornatrocalciopyrochlore in all these units. High-temperature hydrothermal processes caused the pseudomorphic replacement of the above crystals by a second generation of pyrochlore, characterized by lower F and Na contents. Low-temperature hydrothermal replacement of the above pyrochlores, associated with production of quartz-carbonates-fluorite veins, controled the development of a third generation of pyrochlore, characterized by high Sr contents. Finally, supergene processes produced the development of a secondary paragenesis in the carbonatite, consisting in late carbonates, goethite, hollandite and REE minerals (mainly synchysite-(Ce), britholite-(Ce), britholite-(La), cerite-(Ce)). Separation of Ce from the other REE was allowed by oxidizing conditions. Therefore, Ce4+ was also incorporated into a late generation of pyrochlore, which is also strongly enriched in Ba and strongly depleted in Ca and Na

Obtención de vidrio a partir de residuos de la minería del estaño en Bolivia

Manufacturing of glass from tin mining tailings in Bolivia Tailings from mining activities in Bolivia represent an environmental problem. In the vicinity of the tin mines of Llallagua,Potosí department, there are large dumps and tailings. We present a study of the use of these wastes as raw materials for the manufacture of glass. This procedure aims to contribute to environmental remediation of mining areas through the vitrification, a process which offers an alternative for stabilization of hazardous waste. In addition, the marketing of the obtained product would provide an additional income to the mining areas. For this study three samples of mining waste, with grain size between sand and silt, were used. The chemical composition of these raw materials, determined by X-ray fluorescence, is granitic, with high contents of heavy metals. On the basis of its composition, glass were made from silica glass by adding CaCO3 and Na2CO3. The thermal cycle has been determined from TDA. Tg values of glass range from 626º to 709 °C. Leaching tests of the obtained glasses confirm their capacity to retain heavy metals.

The coal bearing Cenozoic As Pontes Basin (NW Spain): Geological influence on its coal's characteristics

Lignite deposits in the Cenozoic As Pontes strike-slip basin (northwestern Spain)were formed as a function of specific paleoclimatic conditions and tectonic evolution of the basin.

Nota sobre las mineralizaciones de fluorita del Tagamanent (Barcelona)

En la zona occidental del Macizo del Montseny. parte septentrional de la subunidad Prelitoral de las Cadenas Costeras Catalanas, se observan unas mineralizaciones de fluorita-galena y baritina que ocupan estructuras filonianas. Se describen las caracteristicas de dichas mineralizaciones dando especial enfasis al filón principal y a su encajante.

Determinación de la paleosalinidad, mediante la relación Br/Cl, en las sales de la cuenca potásica catalana (Sallent, Barcelona, España)

Debido a su acumdación en las salmueras de las cubetas de deposición evaporítica, el Br se concentra progresivamente en los ultimos precipitados de los cloruros. La relación Br/Cl ha sido utilizada (BOEKE y EITEL, 1923; D'ANS y KÜHN, 1944) para determinar variaciones en la concentración de la salmuera durante la deposición evaporítica. Para la determinación cuantitativa del Br y CL en varias muestras recogidas en la explotación de Sallent, se ha utilizado la fluorescencia de rayos X.

Obtención de vidrio a partir de residuos de la minería del estaño en Bolivia

Manufacturing of glass from tin mining tailings in Bolivia Tailings from mining activities in Bolivia represent an environmental problem. In the vicinity of the tin mines of Llallagua,Potosí department, there are large dumps and tailings. We present a study of the use of these wastes as raw materials for the manufacture of glass. This procedure aims to contribute to environmental remediation of mining areas through the vitrification, a process which offers an alternative for stabilization of hazardous waste. In addition, the marketing of the obtained product would provide an additional income to the mining areas. For this study three samples of mining waste, with grain size between sand and silt, were used. The chemical composition of these raw materials, determined by X-ray fluorescence, is granitic, with high contents of heavy metals. On the basis of its composition, glass were made from silica glass by adding CaCO3 and Na2CO3. The thermal cycle has been determined from TDA. Tg values of glass range from 626º to 709 °C. Leaching tests of the obtained glasses confirm their capacity to retain heavy metals.

Geology of the Cerro-Quema Au-Cu deposit (Azuero Peninsula, Panama)

The Cerro Quema district, located on the Azuero Peninsula, Panama, is part of a large regional hydrothermal system controlled by regional faults striking broadly E-W, developed within the Río Quema Formation. This formation is composed of volcanic, sedimentary and volcano-sedimentary rocks indicating a submarine depositional environment, corresponding to the fore-arc basin of a Cretaceous-Paleogene volcanic arc. The structures observed in the area and their tectono-stratigraphic relationship with the surrounding formations suggest a compressive and/or transpressive tectonic regime, at least during Late Cretaceous-Oligocene times. The igneous rocks of the Río Quema Formation plot within the calc-alkaline field with trace and rare earth element (REE) patterns of volcanic arc affinity. This volcanic arc developed on the Caribbean large igneous province during subduction of the Farallon Plate. Mineralization consists of disseminations of pyrite and enargite as well as a stockwork of pyrite and barite with minor sphalerite, galena and chalcopyrite, hosted by a subaqueous dacitic lava dome of the Río Quema Formation. Gold is present as submicroscopic grains and associated with pyrite as invisible gold. A hydrothermal alteration pattern with a core of advanced argillic alteration (vuggy silica with alunite, dickite, pyrite and enargite) and an outer zone of argillic alteration (kaolinite, smectite and illite) has been observed. Supergene oxidation overprinted the hydrothermal alteration resulting in a thick cap of residual silica and iron oxides. The ore minerals, the alteration pattern and the tectono-volcanic environment of Cerro Quema are consistent with a high sulfidation epithermal system developed in the Azuero peninsula during pre-Oligocene times.

Los filones plumbíferos de Linares (Jaen) son continuos hasta el paleocaliche de la base del Trias

El area de Linares (Jaen) pertenece al distrito minero de Linares-La Carolina. caracterizado por filones de ankerita y galena, principalmente de gran longitud y extensión vertical, encajados en materiales hercinicos. Cerca de Linares, entre los pozs La Esmeralda y San Juan puede observarse como todos los constituyentes del relleno de los Filones del zocalo cortan igualmente al paleosuelo carbonatado de la base del trias.

Fluid flow processes at basin scale

S u b s u r face fluid flow plays a significant role in many geologic processes and is increasingly being studied in the scale of sedimentary basins and geologic time perspective. Many economic resources such as petroleum and mineral deposits are products of basin scale fluid flow operating over large periods of time. Such ancient flow systems can be studied through analysis of diagenetic alterations and fluid inclusions to constrain physical and chemical conditions of fluids and rocks during their paleohy d r og e o l ogic evolution. Basin simulation models are useful to complement the paleohy d r og e o l ogic record preserved in the rocks and to derive conceptual models on hydraulic basin evolution and generation of economic resources. Different types of fluid flow regimes may evo l ve during basin evolution. The most important with respect to flow rates and capacity for transport of solutes and thermal energy is gr avitational fluid flow driven by the topographic configuration of a basin. Such flow systems require the basin to be elevated above sea level. Consolidational fluid flow is the principal fluid migration process in basins below sea level, caused by loading of compressible rocks. Flow rates of such systems are several orders of magnitude below topogr a p hy driven flow. Howeve r, consolidation may create significant fluid ove rpressure. Episodic dewatering of ove rpressured compart m e n t s m ay cause sudden fluid release with elevated flow velocities and may cause a transient local thermal and chemical disequilibrium betwe e n fluid and rock. This paper gives an ove rv i ew on subsurface fluid flow processes at basin scale and presents examples related to the Pe n e d è s basin in the central Catalan continental margin including the offshore Barcelona half-graben and the compressive South-Pyrenean basin.

Aproximacion a la hidrodinamica de los sistemas hidrotermales Liquido - dominantes asociados a yacimientos de Au-Ag. Aplicacion teorica al sector Almagrera - Herrerias (Almeria)

Los yacimientos epitermales del sector Almagrera-Herrerías parecen originados por un sistema hidrotermal asociado a celdas convectivas superficiales alimentadas por aguas meteóricas/marinas y magmáticas. La simulación matemática de un teórico sistema hidrotermal convectivo muestra la coincidencia entre las zonas mineralizadas conocidas con las zonas de descarga y acumulación de masa predecidas por el modelo. Todo ello, y la existencia de un sistema hidrotermal aún en activo, explica el interés de localizar zonas de descarga del sistema hidrogeológico actual, con el fin de profundizar en la génesis de los yacimientos conocidos y localizar posibles nuevos depósitos.

Late and postmagmatic alterations in the tin-bearing batholith of Ricobayo (Iberian Massif, NW Spain)

The deuteric alteration processes undergone by the granites of the Ricobayo Batholith were: microclinization, chloritization, albitization, muscovitization, tourmalinization and garnetization. These processes must be interpreted in a dynamic context so that the different reactions that take place are the consequence of a successive interaction between rock and fluids. The physicochemical conditions deduced from these fluids are: temperature lower than 600 OC, pressure between 1.5 and 1 Kb, fugacity of oxygen between 10-25 and 10-35 bars, fugacity of sulphur lower than 10-l5 bars, the composition was kept stable and their log (a(K+)/a(Ht)) and log (a(Na+)/a(H+)) varied between 3.8 and 3.2 and between 3.5 and 4.6, respectively, and the pH of the fluids was higher than 5 during the microclinization, muscovitization and tourmalinization, and lower during chloritization and albitization. The deposition of cassiterite occurs with pH episodes that exceed 5.

Nota sobre una localidad con pirita (Sta. Creu d'Olorde, Barcelona)

Se estudia la situación geolgóica y las características de yacimiento de una localidad con pirita (Santa Creu d'Olorde, Barcelona). Las muestras mineralógicas y petrológicas son estudiadas mediante las técnicas, de luz reflejada, difractometría y espectrografia por fluorescencia de rayos X.

Caracterización morfológica, textural y composicional de las partículas de oro reveladas en placeres marinos de las playas Mejías y Jiguaní (NE de Cuba Oriental)

En este trabajo se describen los principales rasgos morfológicos, texturales y composicionales de las partículas de oro presentes en los placeres marinos costeros de las playas Mejías y Jiguaní, Cuba. Las partículas de oro estudiadas en ambos depósitos, son muy finas, mostrando formas tabulares predominantes; en ocasiones aparecen muy aplastadas, formando especies de laminillas o hojuelas, observándose, a través de las imágenes de electrones etrodispersados,partículas con texturas internas muy complejas , así como cariado de los granos. Las partículas están compuestas por subgranos de composición diferente,correspondientes a aleaciones naturales de Electrum, oro nativo y oro mercurial en ambos placeres y aleaciones de Au-Cu (tetraauricuprido) en el Placer Jiguaní. Estos subgranos frecuentemente se encuentran alterados en sus bordes. Esta alteración consiste predominantemente en un enriquecimiento en oro con relación a la plata.

Occurrence of a new sulphate mineral: Ca7Na3K(SO4)9 in the Emet borate deposits, western Anatolia (Turkey)

This paper is a preliminary report on the petrographic and geochemical characteristics of a new sulphate mineral associated with lacustrine glauberite layers. This mineral is present in two boreholes recently drilled in the Emet borate district (Mio-cene; western Anatolia , Turkey). The evaporitic succession in these boreholes is mainly formed of a glauber ite-probertiteal-ternation. We suggest the name"emetite", after the town of Emet, for the new sulphate mineral, although the fine crystal size hinders the appropriate chemical and crystallographic characterization required to propose it as a new mineral to the International Mineralogical Association. .

Occurrence of a new sulphate mineral: Ca7Na3K(SO4)9 in the Emet borate deposits, western Anatolia (Turkey)

This paper is a preliminary report on the petrographic and geochemical characteristics of a new sulphate mineral associated with lacustrine glauberite layers. This mineral is present in two boreholes recently drilled in the Emet borate district (Mio-cene; western Anatolia , Turkey). The evaporitic succession in these boreholes is mainly formed of a glauber ite-probertiteal-ternation. We suggest the name"emetite", after the town of Emet, for the new sulphate mineral, although the fine crystal size hinders the appropriate chemical and crystallographic characterization required to propose it as a new mineral to the International Mineralogical Association. .