Looking beneath Dalí's paint: non-destructive canvas analysis

A new analytical method was developed to non-destructively determine pH and degree of polymerisation (DP) of cellulose in fibres in 19th 20th century painting canvases, and to identify the fibre type: cotton, linen, hemp, ramie or jute. The method is based on NIR spectroscopy and multivariate data analysis, while for calibration and validation a reference collection of 199 historical canvas samples was used. The reference collection was analysed destructively using microscopy and chemical analytical methods. Partial least squares regression was used to build quantitative methods to determine pH and DP, and linear discriminant analysis was used to determine the fibre type. To interpret the obtained chemical information, an expert assessment panel developed a categorisation system to discriminate between canvases that may not be fit to withstand excessive mechanical stress, e.g. transportation. The limiting DP for this category was found to be 600. With the new method and categorisation system, canvases of 12 Dalí paintings from the Fundació Gala-Salvador Dalí (Figueres, Spain) were non-destructively analysed for pH, DP and fibre type, and their fitness determined, which informs conservation recommendations. The study demonstrates that collection-wide canvas condition surveys can be performed efficiently and non-destructively, which could significantly improve collection management.

A note on parallelizing the parameterized expectations algorithm

The parameterized expectations algorithm (PEA) involves a long simulation and a nonlinear least squares (NLS) fit, both embedded in a loop. Both steps are natural candidates for parallelization. This note shows that parallelization can lead to important speedups for the PEA. I provide example code for a simple model that can serve as a template for parallelization of more interesting models, as well as a download link for an image of a bootable CD that allows creation of a cluster and execution of the example code in minutes, with no need to install any software.

Entrepreneurial intention, cognitive social capital and culture: empirical anaylisis for Spain and Taiwan

The main purpose of this paper is building a research model to integrate the socioeconomic concept of social capital within intentional models of new firm creation. Nevertheless, some researchers have found cultural differences between countries and regions to have an effect on economic development. Therefore, a second objective of this study is exploring whether those cultural differences affect entrepreneurial cognitions. Research design and methodology: Two samples of last year university students from Spain and Taiwan are studied through an Entrepreneurial Intention Questionnaire (EIQ). Structural equation models (Partial Least Squares) are used to test the hypotheses. The possible existence of differences between both sub-samples is also empirically explored through a multigroup analysis. Main outcomes and results: The proposed model explains 54.5% of the variance in entrepreneurial intention. Besides, there are some significant differences between both subsamples that could be attributed to cultural diversity. Conclusions: This paper has shown the relevance of cognitive social capital in shaping individuals’ entrepreneurial intentions across different countries. Furthermore, it suggests that national culture could be shaping entrepreneurial perceptions, but not cognitive social capital. Therefore, both cognitive social capital and culture (made up essentially of values and beliefs), may act together to reinforce the entrepreneurial intention.

Moderating effects of management control systems and innovation on performance. Simple methods for correcting the effects of measurement error for interaction effects in small samples

In the accounting literature, interaction or moderating effects are usually assessed by means of OLS regression and summated rating scales are constructed to reduce measurement error bias. Structural equation models and two-stage least squares regression could be used to completely eliminate this bias, but large samples are needed. Partial Least Squares are appropriate for small samples but do not correct measurement error bias. In this article, disattenuated regression is discussed as a small sample alternative and is illustrated on data of Bisbe and Otley (in press) that examine the interaction effect of innovation and style of use of budgets on performance. Sizeable differences emerge between OLS and disattenuated regression

Innovación, frontera tecnológica y capacidad absortiva: un estudio a nivel de países

La principal aportación de este trabajo es poner de manifiesto que la capacidad absortiva de las economías cambia en función de si el país es el líder o es un seguidor. Aunque tampoco olvidamos otras variables como son la I+D interna, la I+D externa, el desarrollo del sistema financiero y las instituciones. Para ello, primero se prueba la presencia de una raíz unitaria y después se asegura una relación de cointegración entre las variables implicadas en el modelo para poder sacar conclusiones a largo plazo. Y por último, para estimar el modelo, se utilizará una técnica econométrica que combina el tratamiento tradicional de los datos de panel con las técnicas de cointegración: los Dynamics Ordinary Least Squares (DOLS). Esta técnica soluciona las limitaciones de los OLS, ya que su distribución no suele ser estándar por la presencia de un sesgo de muestras finitas (causado bien por la endogeneidad de las variables explicativas bien por la correlación serial de la perturbación). Utilizando un panel de datos que comprende 8 países de la OECD entre 1973-2004 y para el Business Sector, se encuentran diversos resultados, entre los que destacamos que la I+D interna, la I+D externa, la frontera tecnológica, la capacidad absortiva y el desarrollo de las instituciones tienen un impacto positivo sobre el nivel de la PTF. En cambio, el desarrollo del sistema financiero tiene un impacto negativo. Palabras claves: fuentes de la I+D, frontera tecnológica, capacidad absortiva, raíces unitarias, cointegración, DOLS.

Supermarket key attributes and location decisions: A comparative study between British and Spanish consumers

The Maximum Capture problem (MAXCAP) is a decision model that addresses the issue of location in a competitive environment. This paper presents a new approach to determine which store s attributes (other than distance) should be included in the newMarket Capture Models and how they ought to be reflected using the Multiplicative Competitive Interaction model. The methodology involves the design and development of a survey; and the application of factor analysis and ordinary least squares. Themethodology has been applied to the supermarket sector in two different scenarios: Milton Keynes (Great Britain) and Barcelona (Spain).

Dynamic compact thermal models with multiple power sources: application to an ultrathin chip stacking technology

Whereas numerical modeling using finite-element methods (FEM) can provide transient temperature distribution in the component with enough accuracy, it is of the most importance the development of compact dynamic thermal models that can be used for electrothermal simulation. While in most cases single power sources are considered, here we focus on the simultaneous presence of multiple sources. The thermal model will be in the form of a thermal impedance matrix containing the thermal impedance transfer functions between two arbitrary ports. Eachindividual transfer function element ( ) is obtained from the analysis of the thermal temperature transient at node ¿ ¿ after a power step at node ¿ .¿ Different options for multiexponential transient analysis are detailed and compared. Among the options explored, small thermal models can be obtained by constrained nonlinear least squares (NLSQ) methods if the order is selected properly using validation signals. The methods are applied to the extraction of dynamic compact thermal models for a new ultrathin chip stack technology (UTCS).

Estudi de l'estat de Salut autopercebut: Modelització de l'índex d'utilitat EQ-5D mitjançant un model tobit

Objective: Health status measures usually have an asymmetric distribution and present a highpercentage of respondents with the best possible score (ceiling effect), specially when they areassessed in the overall population. Different methods to model this type of variables have beenproposed that take into account the ceiling effect: the tobit models, the Censored Least AbsoluteDeviations (CLAD) models or the two-part models, among others. The objective of this workwas to describe the tobit model, and compare it with the Ordinary Least Squares (OLS) model,that ignores the ceiling effect.Methods: Two different data sets have been used in order to compare both models: a) real datacomming from the European Study of Mental Disorders (ESEMeD), in order to model theEQ5D index, one of the measures of utilities most commonly used for the evaluation of healthstatus; and b) data obtained from simulation. Cross-validation was used to compare thepredicted values of the tobit model and the OLS models. The following estimators werecompared: the percentage of absolute error (R1), the percentage of squared error (R2), the MeanSquared Error (MSE) and the Mean Absolute Prediction Error (MAPE). Different datasets werecreated for different values of the error variance and different percentages of individuals withceiling effect. The estimations of the coefficients, the percentage of explained variance and theplots of residuals versus predicted values obtained under each model were compared.Results: With regard to the results of the ESEMeD study, the predicted values obtained with theOLS model and those obtained with the tobit models were very similar. The regressioncoefficients of the linear model were consistently smaller than those from the tobit model. In thesimulation study, we observed that when the error variance was small (s=1), the tobit modelpresented unbiased estimations of the coefficients and accurate predicted values, specially whenthe percentage of individuals wiht the highest possible score was small. However, when theerrror variance was greater (s=10 or s=20), the percentage of explained variance for the tobitmodel and the predicted values were more similar to those obtained with an OLS model.Conclusions: The proportion of variability accounted for the models and the percentage ofindividuals with the highest possible score have an important effect in the performance of thetobit model in comparison with the linear model.

Regression-based techniques for statistical decision making in single-case designs

The present study evaluates the performance of four methods for estimating regression coefficients used to make statistical decisions regarding intervention effectiveness in single-case designs. Ordinary least squares estimation is compared to two correction techniques dealing with general trend and one eliminating autocorrelation whenever it is present. Type I error rates and statistical power are studied for experimental conditions defined by the presence or absence of treatment effect (change in level or in slope), general trend, and serial dependence. The results show that empirical Type I error rates do not approximate the nominal ones in presence of autocorrelation or general trend when ordinary and generalized least squares are applied. The techniques controlling trend show lower false alarm rates, but prove to be insufficiently sensitive to existing treatment effects. Consequently, the use of the statistical significance of the regression coefficients for detecting treatment effects is not recommended for short data series.

Movilidad intergeneracional y emparejamiento selectivo en España

This paper examines the role of assortative mating in the intergenerational economic mobility in Spain. Sons and daughters usually marry individuals with similar characteristics, which may lower mobility. Our empirical strategy employs the Two-sample two-stage least squares estimator to estimate the intergenerational income elasticity in absence of data for two generations not residing in the same household. Our findings suggest that assortative mating plays an important role in the intergenerational transmission process. On average about 50 per 100 of the covariance between parents’ income and child family’s incomecan be accounted for by the person the child is married to