Engineering Geology for Society and Territory: volume 2: landslide processes

This book is one out of 8 IAEG XII Congress volumes, and deals with Landslide processes, including: field data and monitoring techniques, prediction and forecasting of landslide occurrence, regional landslide inventories and dating studies, modeling of slope instabilities and secondary hazards (e.g. impulse waves and landslide-induced tsunamis, landslide dam failures and breaching), hazard and risk assessment, earthquake and rainfall induced landslides, instabilities of volcanic edifices, remedial works and mitigation measures, development of innovative stabilization techniques and applicability to specific engineering geological conditions, use of geophysical techniques for landslide characterization and investigation of triggering mechanisms. Focuses is given to innovative techniques, well documented case studies in different environments, critical components of engineering geological and geotechnical investigations, hydrological and hydrogeological investigations, remote sensing and geophysical techniques, modeling of triggering, collapse, runout and landslide reactivation, geotechnical design and construction procedures in landslide zones, interaction of landslides with structures and infrastructures and possibility of domino effects. The Engineering Geology for Society and Territory volumes of the IAEG XII Congress held in Torino from September 15-19, 2014, analyze the dynamic role of engineering geology in our changing world and build on the four main themes of the congress: environment, processes, issues, and approaches.

Cardiac tissue engineering by electrical stimulation with subcutaneous and cardiac adipose-tissue derived progenitor cells (ATDPCs)

A major challenge of cardiac tissue engineering is directing cells to establish the physiological structure and function of the myocardium being replaced. In native heart, pacing cells generate electrical stimuli that spread throughout the heartcausing cell membrane depolarization and activation of contractile apparatus. We ought to examine whether electricalstimulation of adipose tissue-derived progenitor cells (ATDPCs) exerts phenotypic and genetic changes that enhance theircardiomyogenic potential.

Students’ viewpoint on engineering subjects taught in English

The European Educational Institutions have the challenge and the commitment to enhance multilingual competence and teaching curricular subjects in a foreign language is seen as one of the most promising alternatives. In that context, professors teaching different engineering subjects at the School of Engineering of the UPC at Manresa (EPSEM) have been involved in projects aiming at analyzing the current linguistic situation and developing some on-line open access materials using CLIL as a strategy. They formed the u-Linguatech Research Group on Multilingual Communication in Science and Technology in order to provide such resources in an effective and efficient way. In this paper, we focus on students’ perception of the improvement of their multilingual competence throughout their Engineering degree, by means of subjects taught in English by non-native speakers. Data about the English level of current students are taken into account. We also describe the use of the above resources to improve the quality of subjects learning related to Chemical Engineering curricula.

International journal of engineering education

This work presents an analysis of the assessment tools used by professors at the Universitat Politécnica de Catalunya to assess the generic competencies introduced in the Bachelor’s Degrees in Engineering. In order to conduct this study, a survey was designed and administered anonymously to a sample of the professors most receptive to educational innovation at their own university. All total, 80 professors responded to this survey, of whom 26% turned out to be members of the university’s own evaluation innovation group (https://www.upc.edu/rima/grups/grapa), GRAPA. This percentage represents 47% of the total GRAPA membership, meaning that nearly half of the professors most concerned about evaluation at the university chose to participate. The analysis of the variables carried out using the statistical program SPSS v19 shows that for practically 49% of those surveyed, rubrics are the tools most commonly used to assess generic competencies integrated in more specific ones. Of those surveyed, 60% use them either frequently or always. The most frequently evaluated generic competencies were teamwork (28%), problem solving (26%), effective oral and written communication (24%) and autonomous learning (13%), all of which constitute commonly recognized competencies in the engineering profession. A two-dimensional crosstabs analysis with SPSS v19 shows a significant correlation (Asymp. Sig. 0.001) between the type of tool used and the competencies assessed. However, no significant correlation was found between the type of assessment tool used and the type of subject, type of evaluation (formative or summative), frequency of feedback given to the students or the degree of student satisfaction, and thus none of these variables can be considered to have an influence on the kind of assessment tool used. In addition, the results also indicate that there are no significant differences between the instructors belonging to GRAPA and the rest of those surveyed

A virtual mathematics learning environment for engineering students

Teachers of the course Introduction to Mathematics for Engineers at the UOC, an online distance-learning university, have designed,developed and tested an online studymaterial. It includes basic pre-university mathematics, indications for correct follow-up of this content and recommendations for finding appropriate support and complementarymaterials. Many different resources are used,depending on the characteristics of thecontents: Flash sequences, interactive applets, WIRIS calculators and PDF files.During the last semester, the new study material has been tested with 119 students. The academic results and student satisfaction have allowed us to outline and prioritise future lines of action.

A Virtual Mathematics Learning Environment for Engineering Students

Teachers of the course Introduction to Mathematics for Engineers at the UOC, an online distance-learning university, have designed and produced online study material which includes basic pre-university mathematics, instructions for correct follow-up of this content and recommendations for finding appropiate support and complementary materials.

Phase behavior and rheological analysis of reverse liquid crystals and W/I2, W/H2 gel emulsions using an amphiphilic block copolymer.

This article reports the phase behavior determi- nation of a system forming reverse liquid crystals and the formation of novel disperse systems in the two-phase region. The studied system is formed by water, cyclohexane, and Pluronic L-121, an amphiphilic block copolymer considered of special interest due to its aggregation and structural proper- ties. This system forms reverse cubic (I2) and reverse hexagonal (H2) phases at high polymer concentrations. These reverse phases are of particular interest since in the two-phase region, stable high internal phase reverse emulsions can be formed. The characterization of the I2 and H2 phases and of the derived gel emulsions was performed with small-angle X-ray scattering (SAXS) and rheometry, and the influence of temperature and water content was studied. TheH2 phase experimented a thermal transition to an I2 phase when temperature was increased, which presented an Fd3m structure. All samples showed a strong shear thinning behavior from low shear rates. The elasticmodulus (G0) in the I2 phase was around 1 order of magnitude higher than in theH2 phase. G0 was predominantly higher than the viscousmodulus (G00). In the gel emulsions,G0 was nearly frequency-independent, indicating their gel type nature. Contrarily to water-in-oil (W/O) normal emulsions, in W/I2 and W/H2 gel emulsions, G0, the complex viscosity (|η*|), and the yield stress (τ0) decreased with increasing water content, since the highly viscous microstructure of the con- tinuous phase was responsible for the high viscosity and elastic behavior of the emulsions, instead of the volumefraction of dispersed phase and droplet size. A rheological analysis, in which the cooperative flow theory, the soft glass rheology model, and the slip plane model were analyzed and compared, was performed to obtain one single model that could describe the non-Maxwellian behavior of both reverse phases and highly concentrated emulsions and to characterize their microstructure with the rheological properties.

An Engineering Solution for using Coarse Meshes in the Simulation of Delamination with Cohesive Zone Models

This paper presents a methodology to determine the parameters used in the simulation of delamination in composite materials using decohesion finite elements. A closed-form expression is developed to define the stiffness of the cohesive layer. A novel procedure that allows the use of coarser meshes of decohesion elements in large-scale computations is proposed. The procedure ensures that the energy dissipated by the fracture process is correctly computed. It is shown that coarse-meshed models defined using the approach proposed here yield the same results as the models with finer meshes normally used in the simulation of fracture processes