56 resultados para Reinforcing bars
Resumo:
The main objective of this study was the management of corn stalk waste as reinforcement for polypropylene (PP) injection moulded composites as an alternative to wood flour and fibers. In the first step, corn stalk waste was subjected to various treatments, and four different corn stalk derivatives (flour and fibers) able to be used as reinforcement of composite materials were prepared and characterized. These derivatives are corn stalk flour, thermo-mechanical, semi-chemical, and chemical fibers. They were characterized in terms of their yield, lignin content, Kappa number, fiber length/diameter ratio, fines, coarseness, viscosity, and the length at the break of a standard sheet of paper. Results showed that the corn stalk derivatives have different physico-chemical properties. In the second step, the prepared flour and fibers were explored as a reinforcing element for PP composites. Coupled and non-coupled PP composites were prepared and tested for tensile properties. For overall trend, with the addition of a coupling agent, tensile properties of composites significantly improved, as compared with non-coupled samples. In addition, a morphological study revealed the positive effect of the coupling agent on the interfacial bonding. The composites prepared with semichemical fiber gave better results in comparison with the rest of the corn stalk derivatives due to its chemical characteristics
Resumo:
Stone groundwood (SGW) is a fibrous matter commonly prepared in a high yield process, and mainly used for papermaking applications. In this work, the use of SGW fibers is explored as reinforcing element of polypropylene (PP) composites. Due to its chemical and superficial features, the use of coupling agents is needed for a good adhesion and stress transfer across the fiber-matrix interface. The intrinsic strength of the reinforcement is a key parameter to predict the mechanical properties of the composite and to perform an interface analysis. The main objective of the present work was the determination of the intrinsic tensile strength of stone groundwood fibers. Coupled and non-coupled PP composites from stone groundwood fibers were prepared. The influence of the surface morphology and the quality at interface on the final properties of the composite was analyzed and compared to that of fiberglass PP composites. The intrinsic tensile properties of stone groundwood fibers, as well as the fiber orientation factor and the interfacial shear strength of the current composites were determined
Resumo:
The behavior of stone groundwood / polypropylene injection-molded composites was evaluated with and without coupling agent. Stone groundwood (SGW) is a fibrous material commonly prepared in a high yield process and mainly used for papermaking applications. In this work, the use of SGW fibers was explored as a reinforcing element of polypropylene (PP) composites. The surface charge density of the composite components was evaluated, as well as the fiber’s length and diameter inside the composite material. Two mixing extrusion processes were evaluated, and the use of a kinetic mixer, instead of an internal mixer, resulted in longer mean fiber lengths of the reinforcing fibers. On the other hand, the accessibility of surface hydroxyl groups of stone groundwood fibers was improved by treating the fibers with 5% of sodium hydroxide, resulting in a noticeable increase of the tensile strength of the composites, for a similar percentage of coupling agent. A new parameter called Fiber Tensile Strength Factor is defined and used as a baseline for the comparison of the properties of the different composite materials. Finally the competitiveness of stone groundwood / polypropylene / polypropylene-co-maleic anhydride system, which compared favorably to sized glass-fiber / polypropylene GF/PP and glass-fiber / polypropylene / polypropylene-co-maleic anhydride composite formulations, was quantified by means of the fiber tensile strength factor
Resumo:
Quina és la primera imatge que et ve al cap quan sents parlar de l’avinguda Diagonal?Segurament és la d’una avinguda llarga i sovint altament congestionada pel trànsit.No obstant, fa seixanta anys l’avinguda Diagonal complia unes funcions ben diferents a les que compleix avui en dia. Tot just acabava de finalitzar la Guerra Civil i la gent necessitava diversió, i per això l’avinguda acollia sales de festa, bars i cafès, els grans premis d’automoció de l’època i era una mena d’autopista per travessar la ciutat de manera ràpida. Tot això es ben diferent de la Diagonal actual on el trànsit és molt dens, i la congestió i el desordre estan presents al nostre cap quan pensem en aquesta columna vertebral de l’Eixample.Res a veure amb la Diagonal del futur, on els vianants tindran un espai molt generósper poder passejar, comprar o fer una copa a la terrassa d’un bar tranquil·lament sense haver d’esquivar les bicicletes que, per cert, també tindran un espai reservat i bendelimitat. I una reducció del trànsit molt important, per tal de tenir una avingudamoderna, neta, cosmopolita i al nivell de la ciutat de Barcelona.I, com veurem a continuació, aquesta reforma es mourà al voltant d’un polèmic i controvertit punt: la unió dels dos tramvies de la ciutat a través de l’avinguda Diagonal.
Resumo:
Tots hem sentit a parlar del canvi del Raval en aquests últims anys. Actualment la majoria del jovent no només hi estudia sinó que hi passa la major part del seu tempsd’oci, en bars, restaurants, museus, galeries d’art, comerços...Nosaltres ens hem preguntat: Per què el Raval ha canviat tant? S’han fet molts treballs, molts estudis, s’han intentat trobar les diverses causes que han produït aquest fenòmen.Més específicament ens hem preguntat: Pot ser que degut a la construcció del cluster cultural format pel MACBA i el CCCB, entre d’altres, s’hagi produït aquest canvi?Així doncs, en aquest treball intentarem contestar ambdues preguntes. Intentarem ser precisos, concisos, breus i clars; esperem que us resulti interessant.
Resumo:
In this paper, we incorporate a positive theory of unemployment insuranceinto a dynamic overlapping generations model with search-matching frictionsand on-the-job learning-by-doing. The model shows that societies populatedby identical rational agents, but differing in the initial distributionof human capital across agents, may choose very different unemploymentinsurance levels in a politico-economic equilibrium. The interactionbetween the political decision about the level of the unemployment insuranceand the optimal search behavior of the unemployed gives rise to aself-reinforcing mechanism whichmay generate multiple steady-stateequilibria. In particular, a European-type steady-state with highunemployment, low employment turnover and high insurance can co-exist withan American-type steady-state with low unemployment, high employment turnoverand low unemployment insurance. A calibrated version of the model featurestwo distinct steady-state equilibria with unemployment levels and durationrates resembling those of the U.S. and Europe, respectively.
Resumo:
This paper presents a tractable dynamic general equilibrium model thatcan explain cross-country empirical regularities in geographical mobility,unemployment and labor market institutions. Rational agents vote overunemployment insurance (UI), taking the dynamic distortionary effects ofinsurance on the performance of the labor market into consideration.Agents with higher cost of moving, i.e., more attached to their currentlocation, prefer more generous UI. The key assumption is that an agent'sattachment to a location increases the longer she has resided there. UIreduces the incentive for labor mobility and increases, therefore, thefraction of attached agents and the political support for UI. The mainresult is that this self-reinforcing mechanism can give rise to multiplesteady-states-one 'European' steady-state featuring high unemployment,low geographical mobility and high unemployment insurance, and one'American' steady-state featuring low unemployment, high mobility andlow unemployment insurance.
Resumo:
This article brings a geometric proposal which can be applied to the bar structures. The starting point is the substitution of the usual knots in a structural web by a system of combining the bars tivo by two, which is achieved by twisting the bars in each knot. The tensile forces that appear and the introduction of joints in each of these knots allow the transition from a rigid or undeformablegeometiy to a neiv flexible" one leading to the possibility of one and the same structural web adopting different sizes while preserving its original geometric form
Resumo:
Diacylglycerol is necessary for trans-Golgi network (TGN) to cell surface transport, but its functional relevance in the early secretory pathway is unclear. Although depletion of diacylglycerol did not affect ER-to-Golgi transport, it led to a redistribution of the KDEL receptor to the Golgi, indicating that Golgi-to-ER transport was perturbed. Electron microscopy revealed an accumulation of COPI-coated membrane profiles close to the Golgi cisternae. Electron tomography showed that the majority of these membrane profiles originate from coated buds, indicating a block in membrane fission. Under these conditions the Golgi-associated pool of ARFGAP1 was reduced, but there was no effect on the binding of coatomer or the membrane fission protein CtBP3/BARS to the Golgi. The addition of 1,2-dioctanoyl-sn-glycerol or the diacylglycerol analogue phorbol 12,13-dibutyrate reversed the effects of endogenous diacylglycerol depletion. Our findings implicate diacylglycerol in the retrograde transport of proteins from Golgi to the ER and suggest that it plays a critical role at a late stage of COPI vesicle formation.
Resumo:
We report about a 37 year old male patient with a pectus excavatum. The patient was in NYHA functional class III. After performed computed tomography the symptoms were thought to be related to the severity of chest deformation. A Ravitch-procedure had been accomplished in a district hospital in 2009. The crack of a metal bar led to a reevaluation 2010, in which surprisingly the presence of an annuloaortic ectasia (root 73 × 74 mm) in direct neighborhood of the formerly implanted metal-bars was diagnosed. Echocardiography revealed a severe aortic valve regurgitation, the left ventricle was massively dilated presenting a reduced ejection fraction of 45%. A marfan syndrome was suspected and the patient underwent a valve sparing aortic root replacement (David procedure) in our institution with an uneventful postoperative course. A review of the literature in combination with discussion of our case suggests the application of stronger recommendations towards preoperative cardiovascular assessment in patients with pectus excavatum.
Resumo:
La investigació se centra en l'ús discriminatori del dret d'admissió en els bars de nit del centre de Barcelona. En concret, el terreny de camp el conformen quatre bars situats en el Raval, un barri que està experimentant un procés d'ennobliment. El treball de camp ha tingut una durada de deu mesos i s¿ha basat fonamentalment en l'observació etnogràfica. L'objectiu principal ha estat constatar sobre el terreny la pràctica efectiva de la discriminació, i com es du a terme, quines són les formes que adopta i les argumentacions en què es basa. La qüestió fonamental que cal respondre és com es duen a terme els protocols d'acceptació o rebuig d¿aquells què pretenen ingressar als bars de nit, a partir de criteris de detecció de persones pertanyents a determinats grups socials considerats indesitjables, moralment contaminants o perillosos. Aquest és el cas dels i les immigrants, especialment els que provenen del Marroc o d'Algèria, als quals molt sovint se'ls impedeix l'entrada perquè són considerats com una font permanent d'ansietat. Això és bàsicament per un prejudici construït envers el que s¿entén popularment com la figura del moro. Molt sovint, els immigrants àrabs són relacionats amb la delinqüència, i això serveix com a pretext perquè es puguin justificar les pràctiques d'exclusió que s'executen envers aquest grup social en nom del dret d'admissió. En definitiva, aquestes pràctiques discriminatòries funcionarien com un mecanisme la missió del qual seria reafirmar la inferioritat moral atribuïda a aquest col·lectiu i garantir que en els espais d'oci nocturn del Raval els i les joves de classe mitjana no estiguin en contacte amb els i les immigrants àrabs. En conseqüència, podem afirmar que l'exercici discriminat del dret d'admissió sembla tenir relació amb el procés d'ennobliment que està experimentant el barri.
Resumo:
Biometric system performance can be improved by means of data fusion. Several kinds of information can be fused in order to obtain a more accurate classification (identification or verification) of an input sample. In this paper we present a method for computing the weights in a weighted sum fusion for score combinations, by means of a likelihood model. The maximum likelihood estimation is set as a linear programming problem. The scores are derived from a GMM classifier working on a different feature extractor. Our experimental results assesed the robustness of the system in front a changes on time (different sessions) and robustness in front a change of microphone. The improvements obtained were significantly better (error bars of two standard deviations) than a uniform weighted sum or a uniform weighted product or the best single classifier. The proposed method scales computationaly with the number of scores to be fussioned as the simplex method for linear programming.
Resumo:
Los principios, las prácticas y la investigación sobre diseño universal han sidoimplantados progresivamente en diferentes ámbitos, respecto al diseño y la preparación de entornos para la atención a las necesidades de las personas con discapacidad. En el contexto internacional, este desarrollo ha estado vinculado al avance en derechos sobre igualdad de oportunidades. En el contexto legislativo español, en la Ley 51/2003 se introducen definiciones sobre «accesibilidad universal» y «diseño para todos», con lo que se genera un marco que posibilita el análisis de fuentes conceptuales y de aplicación en nuestro contexto, de las aportaciones del diseño universal, así como su consideración para la fundamentación de prácticas de innovación e investigación en nuestros ámbitos universitarios. En este trabajo, a partir de una amplia revisión de fuentes y aportaciones de gran trayectoria en este campo, se presentan y analizan distintos enfoques, a través de los cuales se están desarrollando y aplicando prácticas de diseño universal en el ámbito de la enseñanza universitaria, y se plantean sus implicaciones educativas. Este análisis permite concluir que las aplicaciones del diseño universal parecen más prometedoras para el progreso hacia metas de inclusión en el entorno universitario que una perspectiva de «adaptación curricular»; aunque se pone de manifiesto la necesidad de que la investigación que se desarrolle en nuestros contextos aporte pruebas y elementos que favorezcan su implementa- ción. Aplicar prácticas docentes y de planificación en la enseñanza universitaria con bases en el diseño universal podría contribuir a superar, eliminar o evitar en un futuro barreras en el aprendizaje, no solo limitadoras del progreso de las personas con discapacidad, sino también del conjunto del alumnado. Asimismo, las conclusiones de este trabajo plantean aplicaciones y estimaciones de nuevas muestras empíricas como puntos de partida para futuras y posibles determinaciones de enfoques conceptuales.
Resumo:
Shoreline undulations extending into the bathymetric contours with a length scale larger than that of the rhythmic surf zone bars are referred to as shoreline sand waves. Many observed undulations along sandy coasts display a wavelength in the order 1-7 km. Several models that are based on the hypothesis that sand waves emerge from a morphodynamic instability in case of very oblique wave incidence predict this range of wavelengths. Here we investigate the physical reasons for the wavelength selection and the main parametric trends of the wavelength in case of sand waves arising from such instability. It is shown that the existence of a minimum wavelength depends on an interplay between three factors affecting littoral drift: (A) the angle of wave fronts relative to local shoreline, which tends to cause maximum transport at the downdrift flank of the sand wave, (B) the refractive energy spreading which tends to cause maximum transport at the updrift flank and (C) wave focusing (de-focusing) by the capes (bays), which tends to cause maximum transport at the crest or slightly downdrift of it. Processes A and C cause decay of the sand waves while process B causes their growth. For low incidence angles, B is very weak so that a rectilinear shoreline is stable. For large angles and long sand waves, B is dominant and causes the growth of sand waves. For large angles and short sand waves C is dominant and the sand waves decay. Thus, wavelength selection depends on process C, which essentially depends on shoreline curvature. The growth rate of very long sand waves is weak because the alongshore gradients in sediment transport decrease with the wavelength. This is why there is an optimum or dominant wavelength. It is found that sand wave wavelength scales with λ0/β where λ0 is the water wave wavelength in deep water and β is the mean bed slope from shore to the wave base.
Resumo:
Helping behavior is any intentional behavior that benefits another living being or group (Hogg & Vaughan, 2010). People tend to underestimate the probability that others will comply with their direct requests for help (Flynn & Lake, 2008). This implies that when they need help, they will assess the probability of getting it (De Paulo, 1982, cited in Flynn & Lake, 2008) and then they will tend to estimate one that is actually lower than the real chance, so they may not even consider worth asking for it. Existing explanations for this phenomenon attribute it to a mistaken cost computation by the help seeker, who will emphasize the instrumental cost of “saying yes”, ignoring that the potential helper also needs to take into account the social cost of saying “no”. And the truth is that, especially in face-to-face interactions, the discomfort caused by refusing to help can be very high. In short, help seekers tend to fail to realize that it might be more costly to refuse to comply with a help request rather than accepting. A similar effect has been observed when estimating trustworthiness of people. Fetchenhauer and Dunning (2010) showed that people also tend to underestimate it. This bias is reduced when, instead of asymmetric feedback (getting feedback only when deciding to trust the other person), symmetric feedback (always given) was provided. This cause could as well be applicable to help seeking as people only receive feedback when they actually make their request but not otherwise. Fazio, Shook, and Eiser (2004) studied something that could be reinforcing these outcomes: Learning asymmetries. By means of a computer game called BeanFest, they showed that people learn better about negatively valenced objects (beans in this case) than about positively valenced ones. This learning asymmetry esteemed from “information gain being contingent on approach behavior” (p. 293), which could be identified with what Fetchenhauer and Dunning mention as ‘asymmetric feedback’, and hence also with help requests. Fazio et al. also found a generalization asymmetry in favor of negative attitudes versus positive ones. They attributed it to a negativity bias that “weights resemblance to a known negative more heavily than resemblance to a positive” (p. 300). Applied to help seeking scenarios, this would mean that when facing an unknown situation, people would tend to generalize and infer that is more likely that they get a negative rather than a positive outcome from it, so, along with what it was said before, people will be more inclined to think that they will get a “no” when requesting help. Denrell and Le Mens (2011) present a different perspective when trying to explain judgment biases in general. They deviate from the classical inappropriate information processing (depicted among other by Fiske & Taylor, 2007, and Tversky & Kahneman, 1974) and explain this in terms of ‘adaptive sampling’. Adaptive sampling is a sampling mechanism in which the selection of sample items is conditioned by the values of the variable of interest previously observed (Thompson, 2011). Sampling adaptively allows individuals to safeguard themselves from experiences they went through once and turned out to lay negative outcomes. However, it also prevents them from giving a second chance to those experiences to get an updated outcome that could maybe turn into a positive one, a more positive one, or just one that regresses to the mean, whatever direction that implies. That, as Denrell and Le Mens (2011) explained, makes sense: If you go to a restaurant, and you did not like the food, you do not choose that restaurant again. This is what we think could be happening when asking for help: When we get a “no”, we stop asking. And here, we want to provide a complementary explanation for the underestimation of the probability that others comply with our direct help requests based on adaptive sampling. First, we will develop and explain a model that represents the theory. Later on, we will test it empirically by means of experiments, and will elaborate on the analysis of its results.