A performance lower bound for quadratic timing recovery accounting for the symbol transition density

The symbol transition density in a digitally modulated signal affects the performance of practical synchronization schemes designed for timing recovery. This paper focuses on the derivation of simple performance limits for the estimation of the time delay of a noisy linearly modulated signal in the presence of various degrees of symbol correlation produced by the varioustransition densities in the symbol streams. The paper develops high- and low-signal-to-noise ratio (SNR) approximations of the so-called (Gaussian) unconditional Cramér–Rao bound (UCRB),as well as general expressions that are applicable in all ranges of SNR. The derived bounds are valid only for the class of quadratic, non-data-aided (NDA) timing recovery schemes. To illustrate the validity of the derived bounds, they are compared with the actual performance achieved by some well-known quadratic NDA timing recovery schemes. The impact of the symbol transitiondensity on the classical threshold effect present in NDA timing recovery schemes is also analyzed. Previous work on performancebounds for timing recovery from various authors is generalized and unified in this contribution.

Growth and functionalization of carbon nanotubes on quartz filter for environmental applications

Background: Air pollution has become an important issue worldwide due to its adverse health effects. Among the different air contaminants, volatile organic compounds (VOCs) are liquids or solids with a high vapor pressure at room temperature that are extremely dangerous for human health. Removal of these compounds can be achieved using nanomaterials with tailored properties such as carbon nanotubes. Methods: Vertically-aligned multiwall carbon nanotubes (CNTs) were successfully grown on quartz filters by means of plasma enhanced chemical vapor deposition (PECVD). Furthermore, a plasma treatment was performed in order to modify the surface properties of the CNTs. The adsorption/desorption processes of three chlorinated compounds (trichloroethylene, 1,2-dichlorobenzene and chloroform) on the CNTs were studied using mass spectrometry measurements with a residual gas analyzer. Results: The adsorption capability of the CNTs increased after functionalization of their surface with a water plasma treatment. In addition, it was found that the presence of aromatic rings, water solubility and polarity of the VOCs play an important role on the adsorption/desorption kinetics at the CNTs surface. Conclusions: This study demonstrates the applicability of CNTs deposited on quartz filters for the removal or selective detection of volatile organic compounds (VOCs). The presence of aromatic rings in VOCs results in π -stacking interactions with a significant increase of their adsorption. On the other hand, it was found that CNTs surface interactions increase with water solubility and polarity of the VOC.

Sierpinski curve Julia sets for quadratic rational maps

We investigate under which dynamical conditions the Julia set of a quadratic rational map is a Sierpiński curve.

Sidelobe elimination for generalized synthetic discriminant functions by a two-filter correlation and subsequent postprocessing of the intensity distributions

One of the most important problems in optical pattern recognition by correlation is the appearance of sidelobes in the correlation plane, which causes false alarms. We present a method that eliminate sidelobes of up to a given height if certain conditions are satisfied. The method can be applied to any generalized synthetic discriminant function filter and is capable of rejecting lateral peaks that are even higher than the central correlation. Satisfactory results were obtained in both computer simulations and optical implementation.

Using computational fluid dynamics to predict head losses in the auxiliary elements of a microirrigation sand filter

It is often assumed that total head losses in a sand filter are solely due to the filtration media and that there are analytical solutions, such as the Ergun equation, to compute them. However, total head losses are also due to auxiliary elements (inlet and outlet pipes and filter nozzles), which produce undesirable head losses because they increase energy requirements without contributing to the filtration process. In this study, ANSYS Fluent version 6.3, a commercial computational fluid dynamics (CFD) software program, was used to compute head losses in different parts of a sand filter. Six different numerical filter models of varying complexities were used to understand the hydraulic behavior of the several filter elements and their importance in total head losses. The simulation results show that 84.6% of these were caused by the sand bed and 15.4% were due to auxiliary elements (4.4% in the outlet and inlet pipes, and 11.0% in the perforated plate and nozzles). Simulation results with different models show the important role of the nozzles in the hydraulic behavior of the sand filter. The relationship between the passing area through the nozzles and the passing area through the perforated plate is an important design parameter for the reduction of total head losses. A reduced relationship caused by nozzle clogging would disproportionately increase the total head losses in the sand filter

Single period Markowitz portfolio selection, performance gauging and duality: a variation on Luenberger's shortage function

Markowitz portfolio theory (1952) has induced research into the efficiency of portfolio management. This paper studies existing nonparametric efficiency measurement approaches for single period portfolio selection from a theoretical perspective and generalises currently used efficiency measures into the full mean-variance space. Therefore, we introduce the efficiency improvement possibility function (a variation on the shortage function), study its axiomatic properties in the context of Markowitz efficient frontier, and establish a link to the indirect mean-variance utility function. This framework allows distinguishing between portfolio efficiency and allocative efficiency. Furthermore, it permits retrieving information about the revealed risk aversion of investors. The efficiency improvement possibility function thus provides a more general framework for gauging the efficiency of portfolio management using nonparametric frontier envelopment methods based on quadratic optimisation.

Bifurcations of homoclinic tangency in two-dimensional area-preserving and reversible maps

Report for the scientific sojourn at the Research Institute for Applied Mathematics and Cybernetics, Nizhny Novgorod, Russia, from July to September 2006. Within the project, bifurcations of orbit behavior in area-preserving and reversible maps with a homoclinic tangency were studied. Finitely smooth normal forms for such maps near saddle fixed points were constructed and it was shown that they coincide in the main order with the analytical Birkhoff-Moser normal form. Bifurcations of single-round periodic orbits for two-dimensional symplectic maps close to a map with a quadratic homoclinic tangency were studied. The existence of one- and two-parameter cascades of elliptic periodic orbits was proved.

Strongly non-degenerate Lie algebras

Let A be a semiprime 2 and 3-torsion free non-commutative associative algebra. We show that the Lie algebra Der(A) of(associative) derivations of A is strongly non-degenerate, which is a strong form of semiprimeness for Lie algebras, under some additional restrictions on the center of A. This result follows from a description of the quadratic annihilator of a general Lie algebra inside appropriate Lie overalgebras. Similar results are obtained for an associative algebra A with involution and the Lie algebra SDer(A) of involution preserving derivations of A

Metodología de diseño de filtros CRF/SCF basada en modelos de resonadores BAW acoplados acústicamente

La creixent utilització de sistemes de comunicacions mòbils ha impulsat la demanda de filtres passabanda miniaturitzats d'elevades prestacions operant en el rang de freqüències de microones. Els Film Bulk Acoustic Resonators (FBAR) estan esdevenint la principal alternativa als filtres basats en ressonadors Surface Acoustic Wave (SAW) o als basats en ressonadors ceràmics. Els Stacked Crystal Filters (SCF) i els Coupled Resonator Filters (CRF) són configuracions FBAR que permeten assolir una excel·lent atenuació en la banda de refús. Aquest treball presenta un innovador circuit equivalent elèctric que modela el CRF. Llavors, es desenvolupa una metodologia de síntesi de filtres per al SCF i per al CRF utilitzant els seus circuits equivalents elèctrics. La metodologia de disseny presentada permet obtenir les dimensions de l'estructura del filtre acústic partint de les especificacions del filtre i de les restriccions pròpies de la tecnologia. S'han implementat diferents respostes de Chebyshev per a sistemes de comunicacions reals per tal de validar el procediment de disseny dels filtres obtenint els resultats esperats.

Análisis y diseño de filtros apilados basados en resonadores acústicos

Durant els últims anys la demanda de filtres pas banda de ràdio freqüència, de reduïdes dimensions, lleugers i d'elevades prestacions destinats a sistemes de comunicacions inalàmbriques s'ha incrementat de forma significativa. Aquests sistemes principalment són els sistemes de telefonia mòbil de tercera generació UMTS y el sistema de navegació GPS. Els filtres actuals, basats en ressonadors SAW (Surface Acoustic Wave), tenen unes dimensions reduïdes però estan limitats en freqüència (3 GHz) i la seva tecnologia no és compatible amb les tecnologies estàndards de circuits integrats. Per aquestes raons s'espera que els filtres basats en ressonadors BAW (Bulk Acoustic Wave) substitueixin als SAW. Els dos tenen dimensions similars, però els filtres BAW poden funcionar a freqüències superiors a 3 GHz, poden treballar amb nivells de potència majors, i és important destacar el fet que la seva tecnologia és compatible amb les tecnologies estàndards de circuits integrats. La investigació en l'àmbit dels filtres BAW s'ha centrat en millorar els processos tecnològics i la qualitat dels materials, però s'ha treballat poc en l'adaptació de les tècniques sistemàtiques de disseny de filtres a les particularitats d'aquesta tecnologia, per tant el principal objectiu d'aquest treball és presentar mètodes sistemàtics per al disseny de filtres BAW, centrant-se en l'estudi d’estructures apilades.

Nivells de radó en exterior i recintes tancats a la marjal càrstica de Peníscola

S’ha portat a terme un mostreig de diferents punts de la Marjal de Peníscola i 7 instal·lacions properes amb la finalitat de determinar les concentracions de 222Rn en aire exterior i interior. Les anàlisis en els punts exteriors obtenen unes concentracions de 222Rn elevades, superiors a 50 Bq·m-3 en alguns punts. El fet que el sòl de la marjal tingui altes concentracions de 226Ra i elevades concentracions de 226Ra i 222Rn en l’aigua salobre poden justificar aquests valors. L’alta activitat de l’aigua, les característiques de l’edifici i mala gestió del sistema de clavegueram de Peníscola són els responsables de les elevades concentracions de 222Rn en l’aire interior de la depuradora, amb concentracions màximes de més de 70000 Bq·m-3. Un sistema de ventilació adequat com un extractor de PVC evitaria l’acumulació del 222Rn a l’interior de la instal·lació.

Monitor EMG con conexión inalámbrica

El sistema desarrollado en este trabajo permite la detección de fatiga del músculo de un paciente. Las señales electromiográficas generadas por el músculo son detectadas mediante electrodos superficiales, que sirven de entrada al circuito hacia los diferentes canales de entrada. Tras una primera etapa de amplificación, las señales son filtradas por un filtro pasabanda. Las señales acondicionadas se digitalizan mediante un conversor analógico digital que está conectado a un microcontrolador. Éste establece la comunicación con el PC enviándole los datos a través del puerto serie. Finalmente, mediante un programa implementado en Labview se procesan los datos y se determina la existencia o no de fatiga muscular.

Procesamiento de imágenes biológicas

Este proyecto se ha desarrollado a petición del CSIC. El proyecto consiste en crear una aplicación que automatice la localización y obtención de la intensidad de unos puntos luminosos en las células que aparecen en el vídeo. También se desea identificar en qué estadio celular se encuentran las células y si los puntos hallados están en la zona del septim ring. Para ello, se ha hecho un estudio y probado dos métodos para la localización de los puntos y se ha realizado un filtro mediante Adaboost para la localización de las células. También se ha realizado una interfaz gráfica para el usuario final.

Reconocimiento de objetos multi-clase basado en descriptores de forma

Este trabajo presenta un sistema para detectar y clasificar objetos binarios según la forma de éstos. En el primer paso del procedimiento, se aplica un filtrado para extraer el contorno del objeto. Con la información de los puntos de forma se obtiene un descriptor BSM con características altamente descriptivas, universales e invariantes. En la segunda fase del sistema se aprende y se clasifica la información del descriptor mediante Adaboost y Códigos Correctores de Errores. Se han usado bases de datos públicas, tanto en escala de grises como en color, para validar la implementación del sistema diseñado. Además, el sistema emplea una interfaz interactiva en la que diferentes métodos de procesamiento de imágenes pueden ser aplicados.

Diseño de filtros basados en resonadores de onda acústica

En este trabajo veremos cómo diseñar filtros basados en resonadores de onda acústica, concretamente CRF (Coupled Resonator Filter) que incorporan un acoplamiento acústico entre los resonadores apilados. Para ello veremos la teoría ya planteada para este tipo de tecnología y partiremos de ella para diseñar CRF de órdenes mayores a los ya existentes, que permitan obtener unas altas prestaciones con un alto grado de miniaturización, algo que todavía no estaba desarrollado formalmente. Además, se pretende introducir la posibilidad de incorporar los CRF asimétricos a configuraciones CRF ya realizadas, de forma que mejoren las prestaciones debido a la inclusión de ceros de transmisión en la respuesta.