Plasma-enhanced chemical vapor deposition of boron nitride thin films from B2H6-H2-NH3 and B2H6-N2 gas mixtures

Highly transparent and stoichiometric boron nitride (BN) films were deposited on both electrodes (anode and cathode) of a radio-frequency parallel-plate plasma reactor by the glow discharge decomposition of two gas mixtures: B2H6-H2-NH3 and B2H6-N2. The chemical, optical, and structural properties of the films, as well as their stability under long exposition to humid atmosphere, were analyzed by x-ray photoelectron, infrared, and Raman spectroscopies; scanning and transmission electron microscopies; and optical transmittance spectrophotometry. It was found that the BN films grown on the anode using the B2H6-H2-NH3 mixture were smooth, dense, adhered well to substrates, and had a textured hexagonal structure with the basal planes perpendicular to the film surface. These films were chemically stable to moisture, even after an exposition period of two years. In contrast, the films grown on the anode from the B2H6-N2 mixture showed tensile stress failure and were very unstable in the presence of moisture. However, the films grown on the cathode from B2H6-H2-NH3 gases suffered from compressive stress failure on exposure to air; whereas with B2H6-N2 gases, adherent and stable cathodic BN films were obtained with the same crystallographic texture as anodic films prepared from the B2H6-H2-NH3 mixture. These results are discussed in terms of the origin of film stress, the effects of ion bombardment on the growing films, and the surface chemical effects of hydrogen atoms present in the gas discharge.

Computer-aided procedure for optimization of layer thickness uniformity in thermal evaporation physical vapor deposition chambers for lens coating

A computer-aided method to improve the thickness uniformity attainable when coating multiple substrates inside a thermal evaporation physical vapor deposition unit is presented. The study is developed for the classical spherical (dome-shaped) calotte and also for a plane sector reversible holder setup. This second arrangement is very useful for coating both sides of the substrate, such as antireflection multilayers on lenses. The design of static correcting shutters for both kinds of configurations is also discussed. Some results of using the method are presented as an illustration.

De la industrialització de les comarques de Girona al vapor Burés

Aquest article vol mostrar que la industrialització de Catalunya també va ser important a les comarques properes a la ciutat de Girona, especialment a la vall d’Anglès, ja que en aquesta població es conserva el vapor Burés, una màquina de vapor del principi del segle XX en molt bon estat. L'article es presenta en un to divulgador amb ànim de provocar anàlisis mes rigoroses dels temes tractats. En aquest sentit, l'apartat de la descripció tècnica del vapor Burés pretén estimular el seu estudi amb mes profunditat. Finalment, es fan un seguit de propostes, des de ben simples fins a mes agosarades, que caldria tenir en compte per avançar en una bona proposta d'ús públic dels elements patrimonials relacionats amb el vapor Burés

Análisis de la arquitectura de webs mediante tests de estrés de navegación, de usabilidad y eye tracking

Evaluar una arquitectura de la información en un sitio web ya desplegado no resulta una tarea sencilla. La mayoría de las técnicas se centran en examinar la usabilidad del sistema que, aunque afecta a la arquitectura de la información, no es el único factor que influye en ella. La principal técnica que se utiliza es el test de estrés de navegación. Se muestra un aporte metodológico para hacer dicha técnica más informativa, llevándola más allá de la simple anotación en papel por parte del usuario de respuestas a las preguntas de navegación planteadas. Se propone la combinación de ésta con otras técnicas de evaluación de la usabilidad: la técnica de pensar en voz alta o thinking aloud y un cuestionario de usabilidad. Se ha utilizado un sistema de seguimiento de la mirada o eye tracking para complementar la información obtenida mediante las técnicas aplicadas. El enfoque metodológico planteado se ha puesto a prueba analizando una serie de sitios web de bibliotecas de universidades públicas españolas. Se muestra en los resultados la validez del enfoque empleado, así como el valor que dicho enfoque y el uso del eye tracking aportan al análisis de la arquitectura de la información respecto al test de estrés de navegación tradicional.

SiC-Based MIS gas sensor for high water vapor environments

In this work we will prove that SiC-based MIS capacitors can work in environments with extremely high concentrations of water vapor and still be sensitive to hydrogen, CO and hydrocarbons, making these devices suitable for monitoring the exhaust gases of hydrogen or hydrocarbons based fuel cells. Under the harshest conditions (45% of water vapor by volume ratio to nitrogen), Pt/TaOx/SiO2/SiC MIS capacitors are able to detect the presence of 1 ppm of hydrogen, 2 ppm of CO, 100 ppm of ethane or 20 ppm of ethene, concentrations that are far below the legal permissible exposure limits.

Spectroscopic ellipsometry study of the In1-x Gax Asy P1-y / InP Heterojunctions grown by metalorganic chemical-vapor deposition

The dielectric functions of InP, In0.53Ga0.47As, and In0.75Ga0.25As0.5P0.5 epitaxial layers have been measured using a polarization modulation spectroscopic ellipsometer in the 1.5 to 5.3 eV region. The oxide removal procedure has been carefully checked by comparing spectroscopic ellipsometry and x ray photoelectron spectroscopy measurements. These reference data have been used to investigate the structural nature of metalorganic chemical vapor deposition grown In0.53Ga0.47As/InP and In0.75Ga0.25As0.5P0.5/InP heterojunctions, currently used for photodiodes and laser diodes. The sharpness of the interfaces has been systematically compared for the two types of heterojunctions: In1 xGaxAsy/InP and InP/In1 xGaxAsyP1 y. The sharpest interface is obtained for InP growth on In0.75Ga0.25As0.5P0.5 where the interface region is estimated to be (10±10) Å thick. The importance of performing in situ SE measurements is emphasized.

Entrevista Prof. Jaime Rodrigo de Larrucea: Ley de Navegación Marítima

Entrevista Prof. Jaime Rodrigo de Larrucea sobre la aprobada Ley de Navegación Marítima

Aprendizaje elemental a pesar de entrenamiento configuracional en una tarea de navegación

Se entrenó a unas ratas a encontrar una plataforma invisible definida por una configuración de dos objetos en la mitad de los ensayos y por una segunda configuración de dos objetos en la otra mitad. Los objetos estaban espaciados alrededor del borde de la piscina. Las dos configuraciones se presentaron con la misma frecuencia cada día, entremezcladas semi-al azar. En el Experimento 1, las configuraciones de las ratas fueron A y B (configuración 1), y B y C (configuración 2). B era un objeto común a ambas configuraciones. Al final de esta fase los animales recibieron ensayos de prueba en los que se colocaba a una rata en la piscina sin la plataforma y se registraba el tiempo que pasaba en el cuadrante de la plataforma. Los animales tuvieron ensayos de prueba con las configuraciones del entrenamiento, con los objetos por separado, y con una nueva configuración, A y C (una prueba de integración). Tanto ante las configuraciones del entrenamiento como en presencia de B, las ratas pasaron una cantidad de tiempo sustancial buscando la plataforma en el cuadrante de la plataforma; no se obtuvo ningún otro efecto en las otras pruebas. En el Experimento 2 se introdujeron varios cambios metodológicos y se replicaron los principales resultados del Experimento 1. Concluimos que tras un entrenamiento configuracional como el empleado, la navegación de las ratas hacia una plataforma invisible estuvo controlada por un aprendizaje elemental, por B.

Blackbody emission under laser excitation of silicon nanopowder produced by plasma-enhanced chemical-vapor deposition

Previous results concerning radiative emission under laser irradiation of silicon nanopowder are reinterpreted in terms of thermal emission. A model is developed that considers the particles in the powder as independent, so under vacuum the only dissipation mechanism is thermal radiation. The supralinear dependence observed between the intensity of the emitted radiation and laser power is predicted by the model, as is the exponential quenching when the gas pressure around the sample increases. The analysis allows us to determine the sample temperature. The local heating of the sample has been assessed independently by the position of the transverse optical Raman mode. Finally, it is suggested that the photoluminescence observed in porous silicon and similar materials could, in some cases, be blackbody radiation

Gas collisions and pressure quenching of the photoluminescence of silicon nanopowder grown by plasma-enhanced chemical vapor deposition

The quenching of the photoluminescence of Si nanopowder grown by plasma-enhanced chemical vapor deposition due to pressure was measured for various gases ( H2, O2, N2, He, Ne, Ar, and Kr) and at different temperatures. The characteristic pressure, P0, of the general dependence I(P)=I0exp(-P/P0) is gas and temperature dependent. However, when the number of gas collisions is taken as the variable instead of pressure, then the quenching is the same within a gas family (mono- or diatomic) and it is temperature independent. So it is concluded that the effect depends on the number of gas collisions irrespective of the nature of the gas or its temperature

Guía para la navegación por internet

In a very short time, the Internet has become an enormous source of information for teachers and students alike, in various scientific fields and at different levels of education. However, not all of this information is as reliable as one would wish and it is not always presented in the right way, nor is the content suitably structured for our purposes. Teachers need easily accessible criteria for selecting, analysing and evaluating web pages for their students, while bearing in mind the level and the material they are working with. In this article, we present the fundamental steps towards the analysis and subsequent evaluation of web pages of interest in the teaching of the Earth Sciences at different levels of education: Primary Education, Obligatory Secondary Education and “Bachillerato” (Pre-University Education)