33 resultados para Multiple generation scenarios


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The following paper presents an overview of the Ph.D Thesis1 presented in [1], which compiles all the research done during the period of time between 2004-2007. In that dissertation the relay-assisted transmission with half-duplex relays is analyzed from different points of view. This study is motivated by the necessity of finding innovative solutions to cope with the requirements of next generation wireless services, and with current radio technology. The use of relayed communications represents a change of paradigm of conventional communications, and requires the definition and evaluation of protocols to be applied to single or multiple-user relay communication. With the two fold goal of enhancing spectral efficiency and homogenize service in cellular communications, system design is investigated at physical (type of transmissions of the relay, decoding mode, ..) and upper layers (resource allocation, dynamic link control).

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Un reto al ejecutar las aplicaciones en un cluster es lograr mejorar las prestaciones utilizando los recursos de manera eficiente, y este reto es mayor al utilizar un ambiente distribuido. Teniendo en cuenta este reto, se proponen un conjunto de reglas para realizar el cómputo en cada uno de los nodos, basado en el análisis de cómputo y comunicaciones de las aplicaciones, se analiza un esquema de mapping de celdas y un método para planificar el orden de ejecución, tomando en consideración la ejecución por prioridad, donde las celdas de fronteras tienen una mayor prioridad con respecto a las celdas internas. En la experimentación se muestra el solapamiento del computo interno con las comunicaciones de las celdas fronteras, obteniendo resultados donde el Speedup aumenta y los niveles de eficiencia se mantienen por encima de un 85%, finalmente se obtiene ganancias de los tiempos de ejecución, concluyendo que si se puede diseñar un esquemas de solapamiento que permita que la ejecución de las aplicaciones SPMD en un cluster se hagan de forma eficiente.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This article provides a fresh methodological and empirical approach for assessing price level convergence and its relation to purchasing power parity (PPP) using annual price data for seventeen US cities. We suggest a new procedure that can handle a wide range of PPP concepts in the presence of multiple structural breaks using all possible pairs of real exchange rates. To deal with cross-sectional dependence, we use both cross-sectional demeaned data and a parametric bootstrap approach. In general, we find more evidence for stationarity when the parity restriction is not imposed, while imposing parity restriction provides leads toward the rejection of the panel stationar- ity. Our results can be embedded on the view of the Balassa-Samuelson approach, but where the slope of the time trend is allowed to change in the long-run. The median half-life point estimate are found to be lower than the consensus view regardless of the parity restriction.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Les comunicacions cooperatives estan guanyant un gran interès en les comunicacions modernes degut a que permeten millorar la transmissió dʼinformació entre un emissor i un receptor utilitzant una sèrie de terminals situats entre ells. Aquest projecte és un estudi complet del sistemes cooperatius, analitzant el seu rendiment i comparant lʼús dʼun sol dʼaquests terminals amb lʼús del codi Alamouti, que utilitza dos terminals. Primer hi ha una introducció als sistemes cooperatius i a la teoria de la informació. Després hem estudiat un sistema cooperatiu amb la teoria de la informació com a base, en termes de probabilitat de fallada del sistema, i posteriorment lʼhem adaptat a un sistema cooperatiu real utilitzant una modulació QPSK, estudiant la seva probabilitat dʼerror de paquet. Finalment es proposen diversos protocols que permeten millorar el rendiment del sistema cooperatiu estudiat.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Report for the scientific sojourn at the Stanford University from January until June 2007. Music is well known for affecting human emotional states, yet the relationship between specific musical parameters and emotional responses is still not clear. With the advent of new human-computer interaction (HCI) technologies, it is now possible to derive emotion-related information from physiological data and use it as an input to interactive music systems. Providing such implicit musical HCI will be highly relevant for a number of applications including music therapy, diagnosis, nteractive gaming, and physiologically-based musical instruments. A key question in such physiology-based compositions is how sound synthesis parameters can be mapped to emotional states of valence and arousal. We used both verbal and heart rate responses to evaluate the affective power of five musical parameters. Our results show that a significant correlation exists between heart rate and the subjective evaluation of well-defined musical parameters. Brightness and loudness showed to be arousing parameters on subjective scale while harmonicity and even partial attenuation factor resulted in heart rate changes typically associated to valence. This demonstrates that a rational approach to designing emotion-driven music systems for our public installations and music therapy applications is possible.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Report for the scientific sojourn carried out at the Université Catholique de Louvain, Belgium, from March until June 2007. In the first part, the impact of important geometrical parameters such as source and drain thickness, fin spacing, spacer width, etc. on the parasitic fringing capacitance component of multiple-gate field-effect transistors (MuGFET) is deeply analyzed using finite element simulations. Several architectures such as single gate, FinFETs (double gate), triple-gate represented by Pi-gate MOSFETs are simulated and compared in terms of channel and fringing capacitances for the same occupied die area. Simulations highlight the great impact of diminishing the spacing between fins for MuGFETs and the trade-off between the reduction of parasitic source and drain resistances and the increase of fringing capacitances when Selective Epitaxial Growth (SEG) technology is introduced. The impact of these technological solutions on the transistor cut-off frequencies is also discussed. The second part deals with the study of the effect of the volume inversion (VI) on the capacitances of undoped Double-Gate (DG) MOSFETs. For that purpose, we present simulation results for the capacitances of undoped DG MOSFETs using an explicit and analytical compact model. It monstrates that the transition from volume inversion regime to dual gate behaviour is well simulated. The model shows an accurate dependence on the silicon layer thickness,consistent withtwo dimensional numerical simulations, for both thin and thick silicon films. Whereas the current drive and transconductance are enhanced in volume inversion regime, our results show thatintrinsic capacitances present higher values as well, which may limit the high speed (delay time) behaviour of DG MOSFETs under volume inversion regime.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In this study we propose an application of the MuSIASEM approach which is used to provide an integrated analysis of Laos across different scales. With the term “integrated analysis across scales” we mean the generation of a series of packages of quantitative indicators, characterizing the performance of the socioeconomic activities performed in Laos when considering: (i) different hierarchical levels of organization (farming systems described at the level of household, rural villages, regions of Laos, the whole country level); and (ii) different dimensions of analysis (economic dimension, social dimension, ecological dimension, technical dimension). What is relevant in this application is that the information carried out by these different packages of indicators is integrated in a system of accounting which establishes interlinkages across these indicators. This is a essential feature to study sustainability trade-offs and to build more robust scenarios of possible changes. The multi-scale integrated representation presented in this study is based on secondary data (gathered in a three year EU project – SEAtrans and integrated by other available statistical sources) and it is integrated in GIS, when dealing with the spatial representation of Laos. However, even if we use data referring to Laos, the goal of this study is not that of providing useful information about a practical policy issue of Laos, but rather, to illustrate the possibility of using a multipurpose grammar to produce an integrated set of sustainability indicators at three different levels: (i) local; (ii) meso; (iii) macro level. The technical issue addressed is the simultaneous adoption of two multi-level matrices – one referring to a characterization of human activity over a set of different categories, and another referring to a characterization of land uses over the same set of categories. In this way, it becomes possible to explain the characteristics of Laos (an integrated set of indicators defining the performance of the whole country) in relation to the characteristics of the rural Laos and urban Laos. The characteristics of rural Laos, can be explained using the characteristics of three regions defined within Laos (Northern Laos, Central Laos and Southern Laos), which in turn can be defined (using an analogous package of indicators), starting from the characteristics of three main typologies of farming systems found in the regions.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This document presents an integrated analysis of the performance of Catalonia based on an analysis of how the energy consumption (measured at the societal level for the Catalan Society) is used within both the productive sectors of the economy and the household, to generate added value, jobs, and to guarantee a given level of material standard of living to the population. The trends found in Catalonia are compared to the trends of other European Countries to contextualize the performance of Catalonia with respect to other societies that have followed different paths of economic development. The first part of the document consists of the Multi-Scale Integrated Analysis of Societal and Ecosystem Metabolism (MuSIASEM) approach that has been used to provide this integrated analysis of Catalan Society across different scales (starting from an analysis of the specific sectors of the Catalan economy as an Autonomous Community and scaling up to an intra-regional (European Union 14) comparison) and across different dimensions of analyses of energy consumption coupled with added value generation. Within the scope of this study, we observe the various trajectories of changes in the metabolic pattern for Catalonia and the EU14 countries in the Paid Work Sectors composed of namely, the Agricultural Sector, the Productive Sector and the Services and Government Sector also in comparison with the changes in the household sector. The flow intensities of the exosomatic energy and the added value generated for each specific sector are defined per hour of human activity, thus characterized as exosomatic energy (MJ/hour) (or Exosomatic Metabolic Rate) and added value (€/hour) (Economic Labour Productivity) across multiple levels. Within the second part of the document, the possible usage of the MuSIASEM approach to land use analyses (using a multi-level matrix of categories of land use) has been conducted.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this paper is the analysis of the Catalan economy (2001) with the use of a National Accounting Matrix with environmental accounts (NAMEA) for the Catalan economy with 2001 data. We will focus on the analysis of the emission multipliers and we will also analyse the impact of a 10% reduction in greenhouse emissions on emission multipliers. This emission-reduction percentage would bring the Catalan economy into compliance with the maximum emissions level allowed by the Kyoto Protocol. We consider three possible scenarios that would allow this goal to be met. First, we will simulate a 10% reduction in regional emissions and a 5% drop in the endogenous income of the multipliers' model (production, factorial and private income). Second, we will simulate a 10% reduction in emissions and a 10% increase in endogenous income. Finally, we will simulate a 10% reduction in emissions and a 5% increase in endogenous income. Additionally, we will analyse the decomposition of the emission multipliers into own effects, open effects and circular effects to capture the different channels of the emission generation process. Keywords: NAMEA, emission multipliers, Kyoto Protocol.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A multiple-partners assignment game with heterogeneous sales and multiunit demands consists of a set of sellers that own a given number of indivisible units of (potentially many different) goods and a set of buyers who value those units and want to buy at most an exogenously fixed number of units. We define a competitive equilibrium for this generalized assignment game and prove its existence by using only linear programming. In particular, we show how to compute equilibrium price vectors from the solutions of the dual linear program associated to the primal linear program defined to find optimal assignments. Using only linear programming tools, we also show (i) that the set of competitive equilibria (pairs of price vectors and assignments) has a Cartesian product structure: each equilibrium price vector is part of a competitive equilibrium with all optimal assignments, and vice versa; (ii) that the set of (restricted) equilibrium price vectors has a natural lattice structure; and (iii) how this structure is translated into the set of agents' utilities that are attainable at equilibrium.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El objetivo de este estudio es contribuir al entendimiento, desde un punto de vista histórico, del papel que juega el cine en los procesos de popularización de la ciencia, la medicina y la tecnología. El punto de partida es la consideración de la medicina y del cine como conjuntos complejos y multidimensionales de “prácticas y discursos” de carácter científico-tecnológico y, por tanto, como formas particulares de acción e interacción cotidiana entre personas, colectivos e instituciones que juegan un papel básico en los procesos de construcción y funcionamiento de las sociedades contemporáneas. Así, mediante el análisis de la representación y articulación de las prácticas y los discursos médico-sanitarios en el cine documental colonial español del primer franquismo, es decir, en el caso particular de la construcción, legitimación y consolidación de un régimen totalitario, se aportan algunas claves explicativas sobre las múltiples relaciones entre diferentes colectivos (expertos y no-expertos) en cuanto a la naturaleza y el nivel de intervención en los procesos de generación y gestión de conocimiento científico-tecnológico. Como resultado, el cine se revela como un espacio no sólo de evasión y entretenimiento, sino también de ciencia y educación, donde la capacidad de definir y solucionar problemas cotidianos de la población, y por tanto, su impacto en la construcción de la arquitectura social, ideológica, económica, política y cultural de las sociedades contemporáneas, se fundamenta en la combinación de sus aspectos como espectáculo narrativo y científico-tecnológico.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Aquest treball de recerca tracta de la relació existent entre pedagogia, traducció, llengües estrangeres i intel•ligències múltiples. El debat sobre si la traducció és una eina útil a la classe de llengües estrangeres és un tema actual sobre el qual molts investigadors encara indaguen. Estudis recents, però, han demostrat que qualsevol tasca de traducció -en la qual s’hi poden incloure treballs amb les diferents habilitats- és profitosa si la considerem un mitjà, no una finalitat en ella mateixa. Evidentment, l’ús de la traducció dins l’aula és avantatjosa, però també hem de tenir presents certs desavantatges d’aquesta aplicació. Un possible desavantatge podria ser la creença que, al principi, molta gent té referent a l’equivalència, paraula per paraula, d’una llengua vers una altra. Però després de presentar vàries tasques de traducció als estudiants, aquests poden arribar a controlar, fins i tot, les traduccions inconscients i poden assolir un cert nivell de precisió i flexibilitat que val la pena mencionar. Però l’avantatge principal és que s’enfronten a una activitat molt estesa dins la societat actual que combina dues llengües, la llengua materna i la llengua objecte d’estudi, per exemple. De tot això en podem deduir que utilitzar la llengua materna a la classe no s’ha de considerar un crim, com fins ara, sinó una virtut, evidentment si és emprada correctament. En aquest treball de recerca s’hi pot trobar una síntesi tant de les principals teories d’adquisició i aprenentatge de llengües com de les teories de traducció. A la pregunta de si les teories, tant de traducció com de llengües estrangeres, s’haurien d’ensenyar implícita o explícitament, es pot inferir que segons el nivell d’estudis on estiguin els aprenents els convindrà aprendre les teories explícitament o les aprendran, de totes maneres, implícitament. Com que qualsevol grup d’estudiants és heterogeni -és a dir que cada individu té un ritme i un nivell d’aprenentatge concret i sobretot cadascú té diferents estils de percepció (visual, auditiu, gustatiu, olfactiu, de moviment) i per tant diferents intel•ligències-, els professors ho han de tenir en compte a l’hora de planificar qualsevol programa d’actuació vers els alumnes. Per tant, podem concloure que les tasques o projectes de traducció poden ajudar als alumnes a aprendre millor, més eficaçment i a aconseguir un aprenentatge més significatiu.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

El canvi climàtic del segle XXI és una realitat, hi ha moltes evidències científiques que indiquen que l’escalfament del sistema climàtic és inequívoc. Malgrat això, també hi ha moltes incerteses respecte els impactes que pot comportar aquest canvi climàtic global. L’objectiu d’aquest projecte és estudiar la possible evolució futura de tres variables climàtiques, que són el rang de la temperatura diürna a prop de la superfície (DTR), la temperatura mitjana a prop de la superfície (MT) i la precipitació mensual (PL_mes) i valorar l’exposició que poden experimentar diferents cobertes del sòl i diferents regions biogeogràfiques del continent europeu davant d’aquests possibles patrons de canvi. Per això s’han utilitzat Models Climàtics Globals que fan projeccions de variables climàtiques que permeten preveure el possible clima futur. Mitjançant l’aplicatiu informàtic Tetyn s’han extret els paràmetres climàtics dels conjunts de dades del Tyndall Centre for Climate Change Research, del futur (TYN SC) i del passat (CRU TS). Les variables obtingudes s’han processat amb eines de sistemes d’informació geogràfica (SIG) per obtenir els patrons de canvi de les variables a cada coberta del sòl. Els resultats obtinguts mostren que hi ha una gran variabilitat, que augmenta amb el temps, entre els diferents models climàtics i escenaris considerats, que posa de manifest la incertesa associada a la modelització climàtica, a la generació d’escenaris d’emissions i a la naturalesa dinàmica i no determinista del sistema climàtic. Però en general, mostren que les glaceres seran una de les cobertes més exposades al canvi climàtic, i la mediterrània, una de les regions més vulnerables

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Els catéters venosos centrals són necessaris per al maneig del pacient crític però poden ser l´origen d´una bacteriemia. Aquest estudi prospectiu de cohort té com a objectiu determinar la utilitat de l´aplicació d´unes mesures bàsiques de prevenció per disminuir la incidència de bacteriemia associada a catéter. Els resultats de l´estudi confirmen que l´aplicació d´aquest sistema d´intervenció múltiple basat en l´evidencia redueix de forma significativa les bacteriemies associades a catéter a la nostra UCI.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.