Reduction of the effect of aberrations in a joint transform correlator

We report the study of the influence of optical aberrations in a joint-transform correlator: The wave aberration of the optical system is computed from data obtained by ray tracing. Three situations are explored: We consider the aberration only in the first diffraction stage (generation of power spectrum), then only in the second (transformation of the power spectrum into correlation), and finally in both stages simultaneously. The results show that the quality of the correlation is determined mostly by the aberrations of the first diffraction stage and that we can optimize the setup by moving the cameras along the optical axis to a suitable position. The good agreement between the predicted data and the experimental results shows that the method explains well the behavior of optical diffraction systems when aberrations are taken into account.

Adding functionalities to precomputed holograms with random mask multiplexing in holographic optical tweezers

In this study, we present a method designed to generate dynamic holograms in holographic optical tweezers. The approach combines our random mask encoding method with iterative high-efficiency algorithms. This hybrid method can be used to dynamically modify precalculated holograms, giving them new functionalities¿temporarily or permanently¿with a low computational cost. This allows the easy addition or removal of a single trap or the independent control of groups of traps for manipulating a variety of rigid structures in real time.

On the monotonic core

The monotonic core of a cooperative game with transferable utility (T.U.-game) is the set formed by all its Population Monotonic Allocation Schemes. In this paper we show that this set always coincides with the core of a certain game associated to the initial game.

Stellario pallidae-Chenopodietum exsuccii Molero et Blanche, nueva asociacion de la comarca de los Monegros (Valle del Ebro).

Los montes de la Retuerta de Pina, situados en el corazón de los Monegros, entre Pina y Bujaraloz, constituyen una suave elevación que se alza ligeramente (417 m s.m. en Purburell) sobre la plataforma de Bujaraloz (300 m de altitud media). Información sobre los suelos, clima general y vegetación de este enclave puede encontrarse en los trabajos especializados de BRAUN BLANQUET & O. BOLOS (Anales Est. Exp. Aula Dei 5. 1957) y TERRADAS (Orsis 2: 71-95.1986). En las estribaciones septentrionales más abruptas de estos montes, se abren una serie de valles de dirección SE-NW, algunos con desniveles relativamente pronunciados (30-50 m) entre las crestas y los fondos. La maquia arbolada del Rhamno-Quercetum cocciferae subas, thuriferetosum está, en las vertientes de umbría, magníficamente representada. Su relativa frondosidad, así como el tamaño y buena conservación de los árboles /. thuriferay P. halepensis, atestiguan la escasa manipulación humana.

Phylogenetic studies in Gnaphalieae (Compositae): The genera Phagnalon Cass. and Aliella Qaiser & Lack

The precise generic delimitation of Aliella andPhagnalon, and their closest relatives within the Gnaphalieae are discussed in this review. Among the main results obtained, wehave found that the genera Aliella and Phagnalon are nested withinthe “Relhania clade” and Anisothrix, Athrixia and Pentatrichia aretheir closest relatives. Macowania is also part of the “Relhaniaclade”, whereas the subtribal affinities of Philyrophyllum liewithin the “crown radiation clade”. The monophyly of Aliellaand Phagnalon is not supported statistically. In addition,Aliella appears to be paraphylethic in most of the analysesperformed. The resulting phylogeny suggests an African origin forthe ancestor of Aliella and Phagnalon and identifies three mainclades within Phagnalon that constitute the following naturalgroups on a geographic basis: (1) the Irano-Turanian clade; (2) the Mediterranean-Macaronesian clade; and (3) the Yemen-Ethiopian clade. Some endemics to Yemen and Ethiopia appeared merged in the Mediterranean-Macaronesian clade, providing new evidence of the phytogeographical links betweenMacaronesia, Eastern Africa and Southern Arabia. Incongruities between thechloroplast and nuclear molecular data and the lack of resolution in some clades mayindicate that hybridization could have played an important role in the evolution anddiversification of both Phagnalon and Aliella.

Cálculo y diseño de una instalación doméstica considerando la certificación energética en edificaciones

En este Proyecto Final de Carrera se estudiará el rendimiento energético de un edificio de viviendas situado en Tarragona, y se propondrán intervenciones para mejorar este comportamiento. Se realizarán los cálculos y dimensionamiento de las instalaciones que afectan al resultado obtenido por esta certificación energética (electricidad, climatización, aislamiento y salubridad), así como la propia evaluación energética, con el programa informático CYPE ingenieros , versión 2012.i. Con el programa informático CYPE Instalaciones de edificio, definiremos el edificio de viviendas en 3D a partir de los planos del proyecto básico, así como los cierres y dimensionamiento de las instalaciones, y obtendremos la demanda energética del edificio de viviendas.Después analizaremos el mercado para ver qué posibles intervenciones podemos realizar en el edificio de viviendas para reducir la demanda energética y mejorar su calificación. Se ha querido enfocar el proyecto desde un punto de vista tecnológico para sugerir las posibles alternativas de instalación, por lo que las propuestas implementadas se basan en equipos consumidores de una menor cantidad de energía sin verse mermadas por ello las prestaciones de confort en las mismas. Así pues, las mejoras intervenidas para mejorar la certificación energética del presente edificio se basan en la aplicación de soluciones de energía solar térmica para ACS y calefacción, adoptar un sistema de suelo radiante y refrescante para la climatización, y el cambio de alumbrado tradicional por tecnología LED. Una vez aplicadas las intervenciones escogidas comprobaremos cómo hemos reducido la demanda energética y cómo ha mejorado la calificación energética del edificio. La conclusión que se puede extraer en la realización de este Proyecto Final de Carrera es que es importante la sensibilización respecto al ahorro energético, puesto que los edificios actuales no son muy eficientes, pero, tal y cómo se comprobará en este proyecto, con una inversión razonable se pueden conseguir unos resultados muy satisfactorios y que a la larga, ésta estará compensada.

Avaluació dels canvis de ritme de sedimentació en el canyó submarí d'Arenys a partir del Pb-210

Amb la finalitat d’estudiar els ritmes d’acumulació de sediments durant els últims 100 anys, s’han extret tres testimonis de sediments del canyó d’Arenys a profunditats de 1074 m, 1410 m i 1632 m respectivament. Els ritmes de sedimentació basats en els perfils verticals de Pb-210 suggereixen que les tendències actuals sobre el flux i acumulació de sediments poden ser diferents a tendències passades. Durant la dècada dels 70 es va portar a terme una ràpida evolució de la flota pesquera del port d’Arenys de Mar. Aquest fet es pot relacionar amb els canvis en el ritme d’acumulació dels sediments al testimoni extret a 1074 m. Els flancs del canyó submarí són objectiu dels arrossegadors del port d’Arenys de Mar, una activitat que pot fer variar la morfologia del fons marí, la resuspensió de les partícules i pot crear fluxos de terbolesa. Per tant, els resultats suggereixen que l’activitat pesquera d’arrossegament pot afectar als ambients submarins d’una manera més important del que s’havia pensat.

Estado del arte en soluciones de virtualización : Sistemas gestores de Cloud: OpenNebula

En el presente proyecto se ha abordado la tarea de acercar las tecnologías existentes de plataformas de gestión de infraestructuras ofrecidas en la nube (Cloud Management Platform, aka CMP) al mundo empresarial. En concreto, se ha desplegado una solución de explotación de infraestructuras privadas en la nube (IaaS) enfocada a la gestión de un datacenter virtualizado, utilizando para ello soluciones completamente basadas en software libre, en concreto, OpenNebula.

Optimized back-focal-plane interferometry directly measures forces of optically trapped particles

Back-focal-plane interferometry is used to measure displacements of optically trapped samples with very high spatial and temporal resolution. However, the technique is closely related to a method that measures the rate of change in light momentum. It has long been known that displacements of the interference pattern at the back focal plane may be used to track the optical force directly, provided that a considerable fraction of the light is effectively monitored. Nonetheless, the practical application of this idea has been limited to counter-propagating, low-aperture beams where the accurate momentum measurements are possible. Here, we experimentally show that the connection can be extended to single-beam optical traps. In particular, we show that, in a gradient trap, the calibration product κ·β (where κ is the trap stiffness and 1/β is the position sensitivity) corresponds to the factor that converts detector signals into momentum changes; this factor is uniquely determined by three construction features of the detection instrument and does not depend, therefore, on the specific conditions of the experiment. Then, we find that force measurements obtained from back-focal-plane displacements are in practice not restricted to a linear relationship with position and hence they can be extended outside that regime. Finally, and more importantly, we show that these properties are still recognizable even when the system is not fully optimized for light collection. These results should enable a more general use of back-focal-plane interferometry whenever the ultimate goal is the measurement of the forces exerted by an optical trap.

Optimized back-focal-plane interferometry directly measures forces of optically trapped particles

Back-focal-plane interferometry is used to measure displacements of optically trapped samples with very high spatial and temporal resolution. However, the technique is closely related to a method that measures the rate of change in light momentum. It has long been known that displacements of the interference pattern at the back focal plane may be used to track the optical force directly, provided that a considerable fraction of the light is effectively monitored. Nonetheless, the practical application of this idea has been limited to counter-propagating, low-aperture beams where the accurate momentum measurements are possible. Here, we experimentally show that the connection can be extended to single-beam optical traps. In particular, we show that, in a gradient trap, the calibration product κ·β (where κ is the trap stiffness and 1/β is the position sensitivity) corresponds to the factor that converts detector signals into momentum changes; this factor is uniquely determined by three construction features of the detection instrument and does not depend, therefore, on the specific conditions of the experiment. Then, we find that force measurements obtained from back-focal-plane displacements are in practice not restricted to a linear relationship with position and hence they can be extended outside that regime. Finally, and more importantly, we show that these properties are still recognizable even when the system is not fully optimized for light collection. These results should enable a more general use of back-focal-plane interferometry whenever the ultimate goal is the measurement of the forces exerted by an optical trap.

Positional stability of holographic optical traps

The potential of digital holography for complex manipulation of micron-sized particles with optical tweezers has been clearly demonstrated. By contrast, its use in quantitative experiments has been rather limited, partly due to fluctuations introduced by the spatial light modulator (SLM) that displays the kinoforms. This is an important issue when high temporal or spatial stability is a concern. We have investigated the performance of both an analog-addressed and a digitally-addressed SLM, measuring the phase fluctuations of the modulated beam and evaluating the resulting positional stability of a holographic trap. We show that, despite imparting a more unstable modulation to the wavefront, our digitally-addressed SLM generates optical traps in the sample plane stable enough for most applications. We further show that traps produced by the analog-addressed SLM exhibit a superior pointing stability, better than 1 nm, which is comparable to that of non-holographic tweezers. These results suggest a means to implement precision force measurement experiments with holographic optical tweezers (HOTs).

Holographic optical tweezers combined with back-focal-plane displacement detection

A major problem with holographic optical tweezers (HOTs) is their incompatibility with laser-based position detection methods, such as back-focal-plane interferometry (BFPI). The alternatives generally used with HOTs, like high-speed video tracking, do not offer the same spatial and temporal bandwidths. This has limited the use of this technique in precise quantitative experiments. In this paper, we present an optical trap design that combines digital holography and back-focal-plane displacement detection. We show that, with a particularly simple setup, it is possible to generate a set of multiple holographic traps and an additional static non-holographic trap with orthogonal polarizations and that they can be, therefore, easily separated for measuring positions and forces with the high positional and temporal resolutions of laser-based detection. We prove that measurements from both polarizations contain less than 1% crosstalk and that traps in our setup are harmonic within the typical range. We further tested the instrument in a DNA stretching experiment and we discuss an interesting property of this configuration: the small drift of the differential signal between traps.