Analog circuit for real-time computation of respiratory mechanical impedance in sleep studies

The aim of this work was to develop a low-cost circuit for real-time analog computation of the respiratory mechanical impedance in sleep studies. The practical performance of the circuit was tested in six patients with obstructive sleep apnea. The impedance signal provided by the analog circuit was compared with the impedance calculated simultaneously with a conventional computerized system. We concluded that the low-cost analog circuit developed could be a useful tool for facilitating the real-time assessment of airway obstruction in routine sleep studies.

Getting to know about health and safety related to products used in painting, drawing and printmakin

Practicing art is not a high risk activity. This statement, along with the creative, expressive and intangible aims of this activity, as well as the lack of information, promotion of safety awareness and training of thepeople in charge of art studios, may have pushed the implications of practicing art as regards health, safety and environment into the background. Faced with this prospect, a comprehensive study of the facilities and the activities carried out in art studios becomes necessary. The study concerns experimental activities involving Health and Safety risks for both the artists and the teachers and students, especially those carried out in the studios located in educational institutions.

Perceptions of diabetes obtained through drawing in childhood and adolescence

Objective: To examine whether drawing is useful in the detection of problems of psychosocial adaptation in children and adolescents with type 1 diabetes (T1D) and in improving communication with health professionals. Methods: We performed an exploratory descriptive study in 199 children and adolescents with T1D aged 413 years. The participants were asked to render a drawing on a suggested topic. The variables analyzed were related to the drawing and to clinical and sociodemographic data. Results: Most participants showed evidence of having a well-balanced personality, but there were also signs of affective or psychosocial difficulties. Conclusion: Drawing is a useful technique by which to identify children"s and adolescents" feelings and possible problems in adapting to T1D, as well as to gain information directly from the children themselves. Future studies should delimit the possibilities of this technique in clinical practice in greater detail.

Perceptions of diabetes obtained through drawing in childhood and adolescence

Objective: To examine whether drawing is useful in the detection of problems of psychosocial adaptation in children and adolescents with type 1 diabetes (T1D) and in improving communication with health professionals. Methods: We performed an exploratory descriptive study in 199 children and adolescents with T1D aged 413 years. The participants were asked to render a drawing on a suggested topic. The variables analyzed were related to the drawing and to clinical and sociodemographic data. Results: Most participants showed evidence of having a well-balanced personality, but there were also signs of affective or psychosocial difficulties. Conclusion: Drawing is a useful technique by which to identify children"s and adolescents" feelings and possible problems in adapting to T1D, as well as to gain information directly from the children themselves. Future studies should delimit the possibilities of this technique in clinical practice in greater detail.

Dibuixar un arbre / Drawing a Tree

L’arbre, un dels símbols més universals i un element intrínsecament vinculat al desenvolupament de la nostra cultura, esdevé, en aquest llibre, el pretext idoni per donar a conèixer alguns dels interrogants que la vivència de l’art contemporani planteja. L’artista Àlex Nogué obre les portes del seu procés de creació per fer visible com es desencadena la gènesi d’una obra d’art i posa a la llum les incerteses, les intuïcions i les aspiracions que comporta la creació artística. Dibuixar un arbre tracta de les similituds entre l’emoció que produeix un plançó al mig d’un bosc i l’emoció de traslladar-lo fins a l’interior d’una presó. De les diferències de dibuixar un xiprer dret o abatut. Dels silencis i dels sorolls de les imatges. Del que una obra pretén i del que mai aconsegueix. Les imatges i els textos d’aquest llibre ens permeten transitar per l’interior de vuit processos de creació i ens mostren com els treballs artístics neixen i creixen. Per emmarcar l’experiència creativa en el context cultural contemporani, Dibuixar unarbre s’inicia amb cinc reflexions d’autors que han viscut amb empatia aquest recorregutcreatiu. Ells mateixos estan immersos de manera apassionada en la creació, producció,difusió o direcció de projectes creatius, i són: Eudald Camps, Xavier Franquesa, Rosa Pera, Víctor Sunyol i Àngels Viladomiu.

Mechanical properties of viral capsids

Viruses are known to tolerate wide ranges of pH and salt conditions and to withstand internal pressures as high as 100 atmospheres. In this paper we investigate the mechanical properties of viral capsids, calling explicit attention to the inhomogeneity of the shells that is inherent to their discrete and polyhedral nature. We calculate the distribution of stress in these capsids and analyze their response to isotropic internal pressure (arising, for instance, from genome confinement and/or osmotic activity). We compare our results with appropriate generalizations of classical (i.e., continuum) elasticity theory. We also examine competing mechanisms for viral shell failure, e.g., in-plane crack formation vs radial bursting. The biological consequences of the special stabilities and stress distributions of viral capsids are also discussed.

An open source browser-based software tool for graph drawing and visualisation

In this research work we searched for open source libraries which supports graph drawing and visualisation and can run in a browser. Subsequent these libraries were evaluated to find out which one is the best for this task. The result was the d3.js is that library which has the greatest functionality, flexibility and customisability. Afterwards we developed an open source software tool where d3.js was included and which was written in JavaScript so that it can run browser-based.

WebGraphEd, an open source graph drawing editor for the web

WebGraphEd is an open source software for graph visualization and manipulation. It is especially designed to work for the web platform through a web browser. The web application has been written in JavaScript and compacted later, which makes it a very lightweight software. There is no need of additional software, and the only requirement is to have an HTML5 compliant browser. WebGraphEd works with scalable vector graphics (SVG), which it makes possible to create lossless graph drawings.

Materials developed by mechanical alloying and melt spinning

Materials science is a multidisciplinary research topic related to the development of physics and technology. Mechanical alloying of ribbon flakes is a two steps route to develop advanced materials. In this work, a Fe based alloy was obtained using three pathways: mechanical alloying, melt-spinning and mechanical alloying of previously melt-spun samples. Processing conditions allow us to obtain amorphous or nanocrystalline structures. Furthermore, a bibliographic revision of mechanical alloying is here presented

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Rapid manufacturing is an advanced manufacturing technology based on layer-by-layer manufacturing to produce a part. This paper presents experimental work carried out to investigate the effects of scan speed, layer thickness, and building direction on the following part features: dimensional error, surface roughness, and mechanical properties for DMLS with DS H20 powder and SLM with CL 20 powder (1.4404/AISI 316L). Findings were evaluated using ANOVA analysis. According to the experimental results, build direction has a significant effect on part quality, in terms of dimensional error and surface roughness. For the SLM process, the build direction has no influence on mechanical properties. Results of this research support industry estimating part quality and mechanical properties before the production of parts with additive manufacturing, using iron-based powders

Pose-based SLAM with probabilistic scan matching algorithm using a mechanical scanned imaging sonar

This paper proposes a pose-based algorithm to solve the full SLAM problem for an autonomous underwater vehicle (AUV), navigating in an unknown and possibly unstructured environment. The technique incorporate probabilistic scan matching with range scans gathered from a mechanical scanning imaging sonar (MSIS) and the robot dead-reckoning displacements estimated from a Doppler velocity log (DVL) and a motion reference unit (MRU). The proposed method utilizes two extended Kalman filters (EKF). The first, estimates the local path travelled by the robot while grabbing the scan as well as its uncertainty and provides position estimates for correcting the distortions that the vehicle motion produces in the acoustic images. The second is an augment state EKF that estimates and keeps the registered scans poses. The raw data from the sensors are processed and fused in-line. No priory structural information or initial pose are considered. The algorithm has been tested on an AUV guided along a 600 m path within a marina environment, showing the viability of the proposed approach

Determination of corn stalk fibers' strength through modeling of the mechanical properties of its composites

Worldwide cultivation of corn is expanding, due in part to the increasing production of bioethanol. In consequence, huge amounts of corn stalks residues are been produced. Instead of incineration, we transformed the corn stalks into a semichemical pulp and successfully applied it as reinforcement in polypropylene composites. PP composites reinforced with 40% wt corn stalk single fibers were prepared, and their mechanical properties were evaluated. Through mechanical properties modeling of the composites, the intrinsic tensile strength of the cellulosic fibers that constitute the corn stalk have been determined

The effect of lignin as a natural adhesive on the physico-mechanical properties of Vitis vinifera fiberboards

Lignin was used as a natural adhesive to manufacture Vitis vinifera fiberboards. The fiberboards were produced at laboratory scale by adding powdered lignin to material that had previously been steam-exploded under optimized pretreatment and pressing conditions. The kraft lignin used was washed several times with an acidic solution to eliminate any contaminants and low molecular weight compounds. This research studied the effects of amounts of lignin ranging from 5% to 20% on the properties of Vitis vinifera fiberboards. The fiberboard properties evaluated were density, water resistance in terms of thickness swelling, water absorption, and the mechanical properties in terms of modulus of rupture, modulus of elasticity, and internal bond. Results showed that fiberboards made from Vitis vinifera without lignin addition had weaker mechanical properties. However, the fiberboards obtained using acid-washed kraft lignin as a natural adhesive had good mechanical and water resistance properties that fully satisfied the relevant standard specifications