26 resultados para Lithium cooled reactors.
Resumo:
The Rietveld profile‐analysis method is used to investigate the x‐ray diffraction pattern of lithiated Fe3O4. It is shown that, after exposure to air, pure magnetite coexists with a lithium‐inserted LixFe3O4 phase. The Mössbauer spectra at 300 and 4.2 K have been used to estimate the lithium content of the sample, the pure magnetite concentration, and the iron distribution over the available 16c and 16d sites of the spinel structure. Magnetization measurements from 4.2 to 120 K with an external magnetic field up to 150 kOe have been used to obtain the saturation magnetic moment, the magnetic anisotropy constants, and the susceptibility. It is concluded that a noncollinear spin structure should be present in Li0.5Fe3O4. These results indicate that there is no room‐temperature extrusion of iron even for x→2.0, but that on exposure to air LixFe3O4 samples with x>0.5 are oxidized at room temperature by delithiation.
Resumo:
Nanoparticles with pH-sensitive behavior may enhance the success of chemotherapy in many cancers by efficient intracellular drug delivery. Here, we investigated the effect of a bioactive surfactant with pH-sensitive properties on the antitumor activity and intracellular behavior of methotrexate-loaded chitosan nanoparticles (MTX-CS-NPs). NPs were prepared using a modified ionotropic complexation process, in which was included the surfactant derived from Nα,Nε-dioctanoyl lysine with an inorganic lithium counterion. The pH-sensitive behavior of NPs allowed accelerated release of MTX in an acidic medium, as well as membrane-lytic pH-dependent activity, which facilitated the cytosolic delivery of endocytosed materials. Moreover, our results clearly proved that MTX-CSNPs were more active against the tumor HeLa and MCF-7 cell lines than the free drug. The feasibilty of using NPs to target acidic tumor extracellular pH was also shown, as cytotoxicity against cancer cells was greater in a mildly acidic environment. Finally, the combined physicochemical and pH-sensitive properties of NPs generally allowed the entrapped drug to induce greater cell cycle arrest and apoptotic effects. Therefore, our overall results suggest that pH-sensitive MTX-CS-NPs could be potentially useful as a carrier system for tumor and intracellular drug delivery in cancer therapy.
Resumo:
We have observed a type of giant magnetoresistance (GMR) in magnetic granular Co10Cu90 alloys. The asymmetric GMR depends strongly on the size of magnetic Co particles, which exhibit superparamagnetic behavior at given measured temperature. The asymmetric GMR points to a metastable state that develops when the sample is field-cooled, which is lost after recycling. We propose that high-field cooling produces more effective parallel alignment of small unblocked Co particle moments and interfacial magnetizations, which contributes to the further decrease of the resistance in comparison with the samples zero-field-cooled, and then applied to the same field.
Resumo:
Spherical carbon coated iron particles of nanometric diameter in the 510 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 58·10 4 Pa of He). The particles exhibit a crystalline dense iron core with an average diameter 7.4 ± 2.0 nm surrounded by a sealed carbon shell, shown by transmission electron microscopy (TEM), selected-area diffrac- tion (SAED), energy-dispersive X-ray analysis (STEM-EDX) and electron energy loss spectroscopy (EELS). The SAED, EDX and EELS results indicate a lack of traces of core oxidized phases showing an efficient protection role of the carbon shell. The magnetic properties of the nanoparticles have been investigated in the 5300 K temperature range using a superconducting quantum interference device (SQUID). The results reveal a superparamagnetic behaviour with an average monodomain diameter of 7.6 nm of the nanoparticles. The zero field cooled and field cooled (ZFC-FC)magnetization curves show a blocking temperature (TB)at room temperature very suitable for biomedical applications (drug delivery, magnetic resonance imaging MRI, hyperthermia).
Resumo:
Antecedentes: La parada cardiorrespiratoria es uno de los principalesproblemas sanitarios en los países desarrollados, además de por la mortalidadproducida, por las importantes repercusiones neurológicas posteriores quepresentan las personas que sobreviven. Hasta un 64% de los supervivientespuede presentar secuelas de gravedad, y tan solo un 1,4% queda exento dealgún tipo de alteración neurológica. Distintos ensayos clínicos, muestran quela hipotermia inducida ligera, es decir, el descenso controlado de latemperatura corporal mejora la supervivencia y los daños neurológicos en lospacientes adultos inconscientes tras una resucitación cardiopulmonar. Sinembargo, no está del todo claro cuáles son los pacientes más indicados pararecibir la terapia, la técnica de inducción ideal, la temperatura objetivo, suduración y la tasa idónea de recalentamiento.Objetivos: El objetivo del estudio es conocer la técnica de hipotermiaterapéutica como cuidado posresucitación tras sufrir una parada cardíaca.Metodología: Para ello, se realizó una búsqueda bibliográfica a través de lassiguientes bases de datos: CSIC, Medline PubMed, CINAHL, BibliotecaCochrane, Cuiden Plus, Dialnet, Scopus y ScienceDirect. Finalmente, seaceptaron 8 artículos que pertenecían a los criterios de inclusión: revisionessistemáticas, ensayos clínicos, revisiones bibliográficas y documentos deconsenso tras consejo de expertos, en español o inglés, publicados desde elaño 2005 hasta el año 2013 cuyos sujetos de estudio son adultos.Resultados: en la actualidad, se recomienda que los pacientes adultosinconscientes, con recuperación de la circulación espontánea tras una paradacardíaca extrahospitalaria, deben ser enfriados a 32-34ºC durante un periodode 12-24 horas cuando el ritmo inicial sea fibrilación ventricular. Se establecen4 periodos de tratamiento: inducción (desde el ingreso en la unidad hasta quese alcanzan los 33ºC), mantenimiento (desde el logro de los 33ºC hasta 24horas después), recalentamiento (12 horas de incremento de la temperatura,hasta alcanzar los 37ºC) y estabilización térmica (12 horas posteriores aalcanzar los 37ºC). Los métodos de inducción y mantenimiento de la hipotermiason diversos y se establecen dos grupos: técnicas invasivas y no invasivas.Palabras clave: hipotermia inducida, parada cardíaca, técnicas enfriamiento
Resumo:
The purpose of this meta-analysis was to examine the efficacy of maintenance treatments for bipolar disorder. Placebo-controlled or active comparator bipolar maintenance clinical trials of ≥6 months' duration with at least 15 patients/treatment group were identified using Medline, EMBASE, clinicaltrials.gov, and Cochrane databases (1993 to July 2010). The main outcome measure was relative risk for relapse for patients in remission. Twenty trials (5,364 patients) were identified. Overall, lithium and quetiapine were the most studied agents (eight and five trials, respectively). The majority of studies included patients who had previously responded to treatment for an acute episode. All interventions, with the exception of perphenazine+mood stabilizer, showed a relative risk for manic/mixed or depressive relapse below 1.0, although there was variation in the statistical significance of the findings vs. placebo. No monotherapy was associated with a significantly reduced risk for both manic/mixed and depressed relapse. Of the combination treatments, only quetiapine+lithium/divalproex, was associated with a significantly reduced risk vs. comparator (placebo+lithium/valproate) for relapse at both the manic/mixed and depressed poles of bipolar illness. Limitations for the analysis include differences in study durations and definitions of relapse. In conclusion, available maintenance therapies show considerable variation in efficacy. The efficacy of lithium and divalproex has been confirmed, but newer therapies, such as a number of atypical antipsychotics were also shown to be effective in bipolar disorder. Efficacy of all maintenance interventions needs to be balanced against the safety and tolerability profiles of individual agents.
Resumo:
Abstract BACKGROUND: The current article is a systematic review concerning the efficacy and safety of aripiprazole in the treatment of bipolar disorder. METHODS: A systematic Medline and repositories search concerning the usefulness of aripiprazole in bipolar disorder was performed, with the combination of the words 'aripiprazole' and 'bipolar'. RESULTS: The search returned 184 articles and was last updated on 15 April 2009. An additional search included repositories of clinical trials and previous systematic reviews specifically in order to trace unpublished trials. There were seven placebo-controlled randomised controlled trials (RCTs), six with comparator studies and one with add-on studies. They assessed the usefulness of aripiprazole in acute mania, acute bipolar depression and during the maintenance phase in comparison to placebo, lithium or haloperidol. CONCLUSION: Aripiprazole appears effective for the treatment and prophylaxis against mania. The data on bipolar depression are so far negative, however there is a need for further study at lower dosages. The most frequent adverse effects are extrapyramidal signs and symptoms, especially akathisia, without any significant weight gain, hyperprolactinaemia or laboratory test changes.
Resumo:
Background To analyse the extent and profile of outpatient regular dispensation of antipsychotics, both in combination and monotherapy, in the Barcelona Health Region (Spain), focusing on the use of clozapine and long-acting injections (LAI). Methods Antipsychotic drugs dispensed for people older than 18 and processed by the Catalan Health Service during 2007 were retrospectively reviewed. First and second generation antipsychotic drugs (FGA and SGA) from the Anatomical Therapeutic Chemical classification (ATC) code N05A (except lithium) were included. A patient selection algorithm was designed to identify prescriptions regularly dispensed. Variables included were age, gender, antipsychotic type, route of administration and number of packages dispensed. Results A total of 117,811 patients were given any antipsychotic, of whom 71,004 regularly received such drugs. Among the latter, 9,855 (13.9%) corresponded to an antipsychotic combination, 47,386 (66.7%) to monotherapy and 13,763 (19.4%) to unspecified combinations. Of the patients given antipsychotics in association, 58% were men. Olanzapine (37.1%) and oral risperidone (36.4%) were the most common dispensations. Analysis of the patients dispensed two antipsychotics (57.8%) revealed 198 different combinations, the most frequent being the association of FGA and SGA (62.0%). Clozapine was dispensed to 2.3% of patients. Of those who were receiving antipsychotics in combination, 6.6% were given clozapine, being clozapine plus amisulpride the most frequent association (22.8%). A total of 3.800 patients (5.4%) were given LAI antipsychotics, and 2.662 of these (70.1%) were in combination. Risperidone was the most widely used LAI. Conclusions The scant evidence available regarding the efficacy of combining different antipsychotics contrasts with the high number and variety of combinations prescribed to outpatients, as well as with the limited use of clozapine. Background To analyse the extent and profile of outpatient regular dispensation of antipsychotics, both in combination and monotherapy, in the Barcelona Health Region (Spain), focusing on the use of clozapine and long-acting injections (LAI). Methods Antipsychotic drugs dispensed for people older than 18 and processed by the Catalan Health Service during 2007 were retrospectively reviewed. First and second generation antipsychotic drugs (FGA and SGA) from the Anatomical Therapeutic Chemical classification (ATC) code N05A (except lithium) were included. A patient selection algorithm was designed to identify prescriptions regularly dispensed. Variables included were age, gender, antipsychotic type, route of administration and number of packages dispensed. Results A total of 117,811 patients were given any antipsychotic, of whom 71,004 regularly received such drugs. Among the latter, 9,855 (13.9%) corresponded to an antipsychotic combination, 47,386 (66.7%) to monotherapy and 13,763 (19.4%) to unspecified combinations. Of the patients given antipsychotics in association, 58% were men. Olanzapine (37.1%) and oral risperidone (36.4%) were the most common dispensations. Analysis of the patients dispensed two antipsychotics (57.8%) revealed 198 different combinations, the most frequent being the association of FGA and SGA (62.0%). Clozapine was dispensed to 2.3% of patients. Of those who were receiving antipsychotics in combination, 6.6% were given clozapine, being clozapine plus amisulpride the most frequent association (22.8%). A total of 3.800 patients (5.4%) were given LAI antipsychotics, and 2.662 of these (70.1%) were in combination. Risperidone was the most widely used LAI. Conclusions The scant evidence available regarding the efficacy of combining different antipsychotics contrasts with the high number and variety of combinations prescribed to outpatients, as well as with the limited use of clozapine.
Resumo:
The anticipated worldwide increase in biodiesel production will result in an accumulation of glycerol for which there are insufficient conventional uses. The surplus of this by-product has increased rapidly during the last decade, prompting a search for new glycerol applications. We describe here the synthesis of dissymmetric chlorohydrin esters from symmetric 1,3-dichloro-2-propyl esters obtained from glycerol. We studied the influence of two solvents: 1,4-dioxane and 1-butanol and two bases: sodium carbonate and 1-butylimidazole, on the synthesis of dissymmetric chlorohydrin esters. In addition, we studied the influence of other bases (potassium and lithium carbonates) in the reaction using 1,4-dioxane as the solvent. The highest yield was obtained using 1,4-dioxane and sodium carbonate.
Resumo:
In this study, (011)-highly oriented Sr, Nb co-doped BiFeO3 (BFO) thin films were successfully grown on SrRuO3/Si substrates by rf-magnetron sputtering. The presence of parasite magnetic phases was ruled out based on the high resolution x-ray diffraction data. BFO films exhibited a columnar-like grain growth with rms surface roughness values of 5.3 nm and average grain sizes of 65-70 nm for samples with different thicknesses. Remanent polarization values (2Pr) of 54 lC cm 2 at room temperature were found for the BFO films with a ferroelectric behavior characteristic of an asymmetric device structure. Analysis of the leakage mechanisms for this structure in negative bias suggests Schottky injection and a dominant Poole-Frenkel trap-limited conduction at room temperature. Oxygen vacancies and Fe3þ/Fe2þ trap centers are consistent with the surface chemical bonding states analysis from x-ray photoelectron spectroscopy data. The (011)-BFO/ SrRuO3/Si film structure exhibits a strong magnetic interaction at the interface between the multiferroic film and the substrate layer where an enhanced ferromagnetic response at 5 K was observed. Zero-field cooled (ZFC) and field cooled (FC) magnetization curves of this film system revealed a possible spin glass behavior at spin freezing temperatures below 30 K depending on the BFO film thickness.
Resumo:
In this study, 13 ceramic samples were subjected to dissolution using three different procedures: (a) acid attack in open PTFE vessels with a mixture of HF-HClO4, (b) fusion of the sample with lithium metaborate and (c) microwave digestion in PTFE bombs. The samples used in the study had been previously analyzed by neutron activation analysis (NAA), X-ray fluorescence (XRF) and X-ray diffraction (XRD) and they cover a wide range of ceramics fired in different atmospheres and temperatures as well as different mineralogical and chemical compositions. The effectiveness of each procedure is evaluated in terms of its ability to dissolve the various mineralogical phases of the samples, of the number of elements that can be determined and of the time needed for the whole scheme of analysis to be completed.