A Data mining approach to indirect inference

Consider a model with parameter phi, and an auxiliary model with parameter theta. Let phi be a randomly sampled from a given density over the known parameter space. Monte Carlo methods can be used to draw simulated data and compute the corresponding estimate of theta, say theta_tilde. A large set of tuples (phi, theta_tilde) can be generated in this manner. Nonparametric methods may be use to fit the function E(phi|theta_tilde=a), using these tuples. It is proposed to estimate phi using the fitted E(phi|theta_tilde=theta_hat), where theta_hat is the auxiliary estimate, using the real sample data. This is a consistent and asymptotically normally distributed estimator, under certain assumptions. Monte Carlo results for dynamic panel data and vector autoregressions show that this estimator can have very attractive small sample properties. Confidence intervals can be constructed using the quantiles of the phi for which theta_tilde is close to theta_hat. Such confidence intervals are found to have very accurate coverage.

Regional value added in Italy over the long run (1891-2001): linking indirect estimates with official figures, and implications

This paper presents value added estimates for the Italian regions, in benchmark years from 1891 until 1951, which are linked to those from official figures available from 1971 in order to offer a long-term picture. Sources and methodology are documented and discussed, whilst regional activity rates and productivity are also presented and compared. Thus some questions are briefly reconsidered: the origins and extent of the north-south divide, the role of migration and regional policy in shaping the pattern of regional inequality, the importance of social capital, and the positioning of Italy in the international debate on regional convergence, where it stands out for the long run persistence of its disparities.

Indirect likelihood inference

Given a sample from a fully specified parametric model, let Zn be a given finite-dimensional statistic - for example, an initial estimator or a set of sample moments. We propose to (re-)estimate the parameters of the model by maximizing the likelihood of Zn. We call this the maximum indirect likelihood (MIL) estimator. We also propose a computationally tractable Bayesian version of the estimator which we refer to as a Bayesian Indirect Likelihood (BIL) estimator. In most cases, the density of the statistic will be of unknown form, and we develop simulated versions of the MIL and BIL estimators. We show that the indirect likelihood estimators are consistent and asymptotically normally distributed, with the same asymptotic variance as that of the corresponding efficient two-step GMM estimator based on the same statistic. However, our likelihood-based estimators, by taking into account the full finite-sample distribution of the statistic, are higher order efficient relative to GMM-type estimators. Furthermore, in many cases they enjoy a bias reduction property similar to that of the indirect inference estimator. Monte Carlo results for a number of applications including dynamic and nonlinear panel data models, a structural auction model and two DSGE models show that the proposed estimators indeed have attractive finite sample properties.

Sunk costs, extensive R&D subsidies and permanent inducement effects

We study whether there is scope for using subsidies to smooth out barriers to R&D performance and expand the share of R&D firms in Spain. We consider a dynamic model with sunk entry costs in which firms’ optimal participation strategy is defined in terms of two subsidy thresholds that characterise entry and continuation. We compute the subsidy thresholds from the estimates of a dynamic panel data type-2 tobit model for an unbalanced panel of about 2,000 Spanish manufacturing firms. The results suggest that “extensive” subsidies are a feasible and efficient tool for expanding the share of R&D firms.

Straightening out the concept of direct and indirect input requirements

Gim & Kim (1998) proposed a generalization of Jeong (1982, 1984) reinterpretation of the Hawkins-Simon condition for macroeconomic stability to off-diagonal matrix elements. This generalization is conceptually relevant for it offers a complementary view of interindustry linkages beyond final or net output influence. The extension is completely similar to the 'total flow' idea introduced by Szyrmer (1992) or the 'output-to-output' multiplier of Miller & Blair (2009). However the practical implementation of Gim & Kim is actually faulty since it confuses the appropriate order of output normalization. We provide a new and elementary solution for the correct formalization using standard interindustry accounting concepts.

Simultaneous estimation of indirect and interaction effects using structural equation models

Interaction effects are usually modeled by means of moderated regression analysis. Structural equation models with non-linear constraints make it possible to estimate interaction effects while correcting formeasurement error. From the various specifications, Jöreskog and Yang's(1996, 1998), likely the most parsimonious, has been chosen and further simplified. Up to now, only direct effects have been specified, thus wasting much of the capability of the structural equation approach. This paper presents and discusses an extension of Jöreskog and Yang's specification that can handle direct, indirect and interaction effects simultaneously. The model is illustrated by a study of the effects of an interactive style of use of budgets on both company innovation and performance

Bayesian nash equilibrium in ''linear'' cournot models with private information about costs

Calculating explicit closed form solutions of Cournot models where firms have private information about their costs is, in general, very cumbersome. Most authors consider therefore linear demands and constant marginal costs. However, within this framework, the nonnegativity constraint on prices (and quantities) has been ignored or not properly dealt with and the correct calculation of all Bayesian Nash equilibria is more complicated than expected. Moreover, multiple symmetric and interior Bayesianf equilibria may exist for an open set of parameters. The reason for this is that linear demand is not really linear, since there is a kink at zero price: the general ''linear'' inverse demand function is P (Q) = max{a - bQ, 0} rather than P (Q) = a - bQ.

The hidden costs of hidden debt

We report evidence that salience may have economically signi.cant e¤ects on homeowners.borrowing behavior, through a bias in favour of less salient but more costly loans. Survey evidence corroborates the existence of such a bias. We outline a simple model in which some consumers are biased and show that under plausible assumptions this affects prices in equilibrium. Market data support the predictions of the model.

The Simple Economics of Conglomeration with Bankruptcy Costs: Separate or Joint Financing?

Which projects should be financed through separate non-recourse loans (or limited- liability companies) and which should be bundled into a single loan? In the pres- ence of bankruptcy costs, this conglomeration decision trades off the benefit of co- insurance with the cost of risk contamination. This paper characterize this tradeoff for projects with binary returns, depending on the mean, variability, and skewness of returns, the bankruptcy recovery rate, the correlation across projects, the number of projects, and their heterogeneous characteristics. In some cases, separate financing dominates joint financing, even though it increases the interest rate or the probability of bankruptcy.

Markups, Gaps, and the Welfare Costs of Business Fluctuations

In this paper we present a simple theory-based measure of the variations in aggregate economic efficiency: the gap between the marginal product of labor and the household s consumption/leisure tradeoff. We show that this indicator corresponds to the inverse of the markup of price over social marginal cost, and give some evidence in support of this interpretation. We then show that, with some auxilliary assumptions our gap variable may be used to measure the efficiency costs of business fluctuations. We find that the latter costs are modest on average. However, to the extent the flexible price equilibrium is distorted, the gross efficiency losses from recessions and gains from booms may be large. Indeed, we find that the major recessions involved large efficiency losses. These results hold for reasonable parameterizations of the Frisch elasticity of labor supply, the coefficient of relative risk aversion, and steady state distortions.

Beyond Smith's rule: An optimal dynamic index, rule for single machine stochastic scheduling with convex holding costs

Most research on single machine scheduling has assumedthe linearity of job holding costs, which is arguablynot appropriate in some applications. This motivates ourstudy of a model for scheduling $n$ classes of stochasticjobs on a single machine, with the objective of minimizingthe total expected holding cost (discounted or undiscounted). We allow general holding cost rates that are separable,nondecreasing and convex on the number of jobs in eachclass. We formulate the problem as a linear program overa certain greedoid polytope, and establish that it issolved optimally by a dynamic (priority) index rule,whichextends the classical Smith's rule (1956) for the linearcase. Unlike Smith's indices, defined for each class, ournew indices are defined for each extended class, consistingof a class and a number of jobs in that class, and yieldan optimal dynamic index rule: work at each time on a jobwhose current extended class has larger index. We furthershow that the indices possess a decomposition property,as they are computed separately for each class, andinterpret them in economic terms as marginal expected cost rate reductions per unit of expected processing time.We establish the results by deploying a methodology recentlyintroduced by us [J. Niño-Mora (1999). "Restless bandits,partial conservation laws, and indexability. "Forthcomingin Advances in Applied Probability Vol. 33 No. 1, 2001],based on the satisfaction by performance measures of partialconservation laws (PCL) (which extend the generalizedconservation laws of Bertsimas and Niño-Mora (1996)):PCL provide a polyhedral framework for establishing theoptimality of index policies with special structure inscheduling problems under admissible objectives, which weapply to the model of concern.

Determinants of organizational form: Transaction costs and institutions in the European trucking industry

We explain why European trucking carriers are much smaller and rely more heavily on owner-operators(as opposed to employee drivers) than their US counterparts. Our analysis begins by ruling outdifferences in technology as the source of those disparities and confirms that standard hypothesesin organizational economics, which have been shown to explain the choice of organizational form inUS industry, also apply in Europe. We then argue that the preference for subcontracting oververtical integration in Europe is the result of European institutions particularly, labor regulationand tax laws that increase the costs of vertical integration.

Start-up costs and pecuniary externalities as barriers to economic development

We use a dynamic monopolistic competition model to show that an economythat inherits a small range of specialized inputs can be trapped into alower stage of development. The limited availability of specialized inputsforces the final goods producers to use a labor intensive technology, whichin turn implies a small inducement to introduce new intermediate inputs. Thestart--up costs, which make the intermediate inputs producers subject todynamic increasing returns, and pecuniary externalities that result from thefactor substitution in the final goods sector, play essential roles in themodel.