Incentives in university technology transfers

There are two main ways in which the knowledge created in universities has been transferred to firms: licensing agreements and the creation of spin-offs. In this paper, we describe the main steps in the transfer of university innovations, the main incentive issues that appear in this process, and the contractual solutions proposed to address them.

Technology, business models and network structure in the airline industry

Network airlines have been increasingly focusing their operations on hub airports through the exploitation of connecting traffic, allowing them to take advantage of economies of traffic density, which are unequivocal in the airline industry. Less attention has been devoted to airlines? decisions on point-to-point thin routes, which could be served using different aircraft technologies and different business models. This paper examines, both theoretically and empirically, the impact on airlines ?networks of the two major innovations in the airline industry in the last two decades: the regional jet technology and the low-cost business model. We show that, under certain circumstances, direct services on point-to-point thin routes can be viable and thus airlines may be interested in deviating passengers out of the hub.

Technology, business models and network structure in the airline industry

Network airlines have been increasingly focusing their operations on hub airports through the exploitation of connecting traffic, allowing them to take advantage of economies of traffic density, which are unequivocal in the airline industry. Less attention has been devoted to airlines' decisions on point-to-point thin routes, which could be served using different aircraft technologies and different business models. This paper examines, both theoretically and empirically, the impact on airlines' networks of the two major innovations in the airline industry in the last two decades: the regional jet technology and the low-cost business model. We show that, under certain circumstances, direct services on point-to-point thin routes can be viable and thus airlines may be interested in deviating passengers out of the hub. Keywords: regional jet technology; low-cost business model; point-to-point network; hub-and-spoke network JEL Classi…fication Numbers: L13; L2; L93

The relationships between technology and open education in the development of a resilient higher education

The place of technology in the development of coherent educational responses to environmental and socio-economic disruption is here placed under scrutiny. One emerging area of interest is the role of technology in addressing more complex learning futures, and more especially in facilitating individual and social resilience, or the ability to manage and overcome disruption. However, the extent to which higher education practitioners can utilise technology to this end is framed by their approaches to the curriculum, and the socio-cultural practices within which they are located. This paper discusses how open education might enable learners to engage with uncertainty through social action within a form of higher education that is more resilient to economic, environmental and energy-related disruption. It asks whether open higher education can be (re)claimed by users and communities within specific contexts and curricula, in order to engage with an uncertain world.

Innovation strategies in the presence of technology markets: evidence from spanish innovative firms

The development of markets for technology has eased the acquisition of technology and reshaped the innovation strategies of firms that we classify as producers of innovations or as imitators. Innovative activities of firms include research, acquisition of technology and downstream activities. Within an industry, firms producing innovations tend to conduct more research and downstream activities than those imitating innovations. Acquisition of technology is equally important for both. To implement innovation strategies, firms producing innovations require both the capability to scan the external environment for technology and the capability to integrate new technology. Firms producing innovations require both, while firms imitating innovations require scan capabilities only

Appropriation of technology in "non-western" societies: an approximation to the case of Bulgaria

The principal focus of the PhD thesis lies in the Social Software area and the appropriation of technology in "non-Western" societies taking the example of Bulgaria. The term "non-Western" is used to explain places considered technologically underdeveloped. The aims have been to capture how Bulgarian users creatively interpret and appropriate Internet identifying the sociocultural, political and subjective conditions in which that appropriation occurs, to identify emerging practices based on the interpretation and use of Internet and the impact they had on society and what conditions could influence the technological interpretation and the meaning these practices had for both users and social configuration of Internet as media in Bulgaria. An ethnographic approach has been used simultaneously in different online and offline contexts. On the one hand, this study is based on exploration of the Bulgarian Internet Space through online participant observation in forums and websites reviews and on the other hand, on semi-structured interviews with different types of users of the virtual platforms found, made both face to face and online and finally online participant observation at the same platforms. It is based on some contributions of the ethnographic work of Christine Hine in virtual environments and the notions of time and space of Barbara Czarniawska contextualized in the modern form of organization that occurs in a network of multiple and fragmented contexts across many movements.

Openness and technology diffusion in payment

We study the relationship between openness and payment system development. In particular, we analyze how the existence of technology diffusion from a more developed country fosters a transformation of payment choice in a less developed country. We apply our analysis to Mexico. Economic growth in Mexico was not high enough to cause a transformation of payment choice observed in the data after 2001. We argue that the switch towards electronic payments can be attributed to openness and related payment technology spillovers from the US in the context of NAFTA.

Technology diffusion and the spatial distribution of wages in the US

What explains the spatial distribution of wages across US counties? I find that two of the most important factors are spatial technology diffusion and externalities due to the aggregate scale of production. One empirical finding supporting the importance of spatial technology diffusion is that average wages in a county decrease with the average level of schooling in neighboring counties when employment in the county and average wages in neighboring counties are held constant. All empirical results are obtained using anovel instrument for (endogenous) employment at the county-leveland take into account other factors (e.g. productivity-differencesacross states, climate) that may determine wages.

Growth accounting in items of turbulence and death: efficiency, technology, capital accumulation and human capital 1929-1950

We employ a non-parametrical approach to growth accounting (Data Envelopment Analysis,DEA) to disentangle the proximate sources of labour productivity growth in 41 nationsbetween 1929 and 1950 by decomposing productivity growth into four components:technological change; efficiency catch-up (movements towards the production frontier),capital accumulation and human capital accumulation. We show that efficiency catch-upgenerally explains productivity growth, whereas technological change and factoraccumulation were limited and distorted by the effects of war. War clearly hamperedefficiency. Moreover, an unbalanced ratio of human capital to physical capital (a gap to thetechnological leader) was crucial for efficiency catching-up.

Complementarity between technology make and buy in innovation strategies: Evidence from Belgiam manufacturing firms

This paper characterizes the innovation strategy of manufacturing firms andexamines the relation between the innovation strategy and importantindustry-, firm- and innovation-specific characteristics using Belgiandata from the Eurostat Community Innovation Survey. In addition to importantsize effects explaining innovation, we find that high perceived risks andcosts and low appropriability of innovations do not discourage innovation,but rather determine how the innovation sourcing strategy is chosen. Withrespect to the determinants of the decision of the innovative firm toproduce technology itself (Make) or to source technology externally (Buy),we find that small firms are more likely restrict their innovation strategyto an exclusive make or buy strategy, while large firms are more likely tocombine both internal and external knowledge acquisition in their innovationstrategy. An interesting result that highlights the complementary nature ofthe Make and Buy decisions, is that, controlled for firm size, companies forwhich internal information is an important source for innovation are morelikely to combine internal and external sources of technology. We find thisto be evidence of the fact that in-house R&D generates the necessaryabsorptive capacity to profit from external knowledge acquisition. Also theeffectiveness of different mechanisms to appropriate the benefits ofinnovations and the internal organizational resistance against change areimportant determinants of the firm's technology sourcing strategy.

Trends in hours, balanced growth and the role of technology in the business cycle

The present paper revisits a property embedded in most dynamic macroeconomic models: the stationarity of hours worked. First, I argue that, contrary to what is often believed, there are many reasons why hours could be nonstationary in those models, while preserving the property of balanced growth. Second, I show that the postwar evidence for most industrialized economies is clearly at odds with the assumption of stationary hours per capita. Third, I examine the implications of that evidence for the role of technology as a source of economic fluctuations in the G7 countries.

Thermal modeling and management in ultrathin chip stack technology

This paper presents a thermal modeling for power management of a new three-dimensional (3-D) thinned dies stacking process. Besides the high concentration of power dissipating sources, which is the direct consequence of the very interesting integration efficiency increase, this new ultra-compact packaging technology can suffer of the poor thermal conductivity (about 700 times smaller than silicon one) of the benzocyclobutene (BCB) used as both adhesive and planarization layers in each level of the stack. Thermal simulation was conducted using three-dimensional (3-D) FEM tool to analyze the specific behaviors in such stacked structure and to optimize the design rules. This study first describes the heat transfer limitation through the vertical path by examining particularly the case of the high dissipating sources under small area. First results of characterization in transient regime by means of dedicated test device mounted in single level structure are presented. For the design optimization, the thermal draining capabilities of a copper grid or full copper plate embedded in the intermediate layer of stacked structure are evaluated as a function of the technological parameters and the physical properties. It is shown an interest for the transverse heat extraction under the buffer devices dissipating most the power and generally localized in the peripheral zone, and for the temperature uniformization, by heat spreading mechanism, in the localized regions where the attachment of the thin die is altered. Finally, all conclusions of this analysis are used for the quantitative projections of the thermal performance of a first demonstrator based on a three-levels stacking structure for space application.

Promoting Metacognitive Skills in a CSCL environment: implications for instructional and technology design

This paper aims to better understand the development of students’ learning processes when participating actively in a specific Computer Supported Collaborative Learning system called KnowCat. To this end, a longitudinal case study was designed, in which eighteen university students took part in a 12-month (two semesters) learning project. During this time period, the students followed an instructional process, using some elements of KnowCat (KnowCat key features) design to support and improve their interaction processes, especially peer learning processes. Our research involved both supervising the students’ collaborative learning processes throughout the learning project and focusing our analysis on the qualitative evolution of the students’ interaction processes and on the development of metacognitive learning processes. The results of the current research reveal that the instructional application of the CSCL-KnowCat system may favour and improve the development of the students’ metacognitive learning processes. Additionally, the implications of the design of computer supported collaborative learning networks and pedagogical issues are discussed in this paper.

Technology transfer at the periphery of the Mycenaean world: the cases of Mycenaean pottery found in central Macedonia (Greece) and the Plain of Sybaris (Italy)

The study of technology transfer in pottery production to the periphery of the Mycenaean world has been addressed by considering two different areas, southern Italy and central Macedonia. Technological features such as ceramic paste, decoration and firing have been determined for different ceramic groups established according to provenance criteria. The studies of technology and provenance have been performed following an archaeometric approach, using neutron activation analysis, petrographic analysis, X-ray diffraction and scanning electron microscopy. The results have revealed the existence of two different models. On the one hand, southern Italy seems to exhibit a more organized pottery production, which follows a Mycenaean-like technology, while in central Macedonia production is probably more varied, being based in part on the technology of the local tradition.

Towards automated specifications of scenarios in enhanced learning technology

Recent standardization efforts in e-learning technology have resulted in a number of specifications, however, the automation process that is considered essential in a learning management system (LMS) is a lessexplored one. As learning technology becomes more widespread and more heterogeneous, there is a growing need to specify processes that cross the boundaries of a single LMS or learning resource repository. This article proposes to obtain a specification orientated to automation that takes on board the heterogeneity of systems and formats and provides a language for specifying complex and generic interactions. Having this goal in mind, a technique based on three steps is suggested. The semantic conformance profiles, the business process management (BPM) diagram, and its translation into the business process execution language (BPEL) seem to be suitable for achieving it.