Eliminació autotròfica de nitrogen en una pila biològica (microbial fuel cells )

L’aigua i l’energia formen un binomi indissociable. En relació al cicle de l’aigua, des de fa varies dècades s’han desenvolupat diferents formes per recuperar part de l’energia relacionada amb l’aigua, per exemple a partir de centrals hidroelèctriques. No obstant, l’ús d’aquesta aigua també porta associat un gran consum energètic, relacionat sobretot amb el transport, la distribució, la depuració, etc... La depuració d’aigües residuals porta associada una elevada demanda energètica (Obis et al.,2009). En termes energètics, tot i que la despesa elèctrica d’una EDAR varia en funció de diferents paràmetres com la configuració i la capacitat de la planta, la càrrega a tractar, etc... es podria considerar que el rati mig seria d’ aproximadament 0.5 KWh•m-3.Els principals costos d’explotació estan relacionats tant amb la gestió de fangs (28%) com amb el consum elèctric (25%) (50% tractament biològic). Tot i que moltes investigacions relacionades amb el tractament d’aigua residual estan encaminades en disminuir els costos d’operació, des de fa poques dècades s’està investigant la viabilitat de que l’aigua residual fins i tot sigui una font d’energia, canviant la perspectiva, i començant a veure l’aigua residual no com a una problemàtica sinó com a un recurs. Concretament s’estima que l’aigua domèstica conté 9.3 vegades més energia que la necessària per el seu tractament mitjançant processos aerobis (Shizas et al., 2004). Un dels processos més desenvolupats relacionats amb el tractament d’aigües residuals i la producció energètica és la digestió anaeròbia. No obstant, aquesta tecnologia permet el tractament d’altes càrregues de matèria orgànica generant un efluent ric en nitrogen que s’haurà de tractar amb altres tecnologies. Per altre banda, recentment s’està investigant una nova tecnologia relacionada amb el tractament d’aigües residuals i la producció energètica: les piles biològiques (microbial fuel cells, MFC). Aquesta tecnologia permet obtenir directament energia elèctrica a partir de la degradació de substrats biodegradables (Rabaey et al., 2005). Les piles biològiques, més conegudes com a Microbial Fuel Cells (acrònim en anglès, MFC), són una emergent tecnologia que està centrant moltes mirades en el camp de l’ investigació, i que es basa en la producció d’energia elèctrica a partir de substrats biodegradables presents en l’aigua residual (Logan., 2008). Els fonaments de les piles biològiques és molt semblant al funcionament d’una pila Daniell, en la qual es separa en dos compartiments la reacció d’oxidació (compartiment anòdic) i la de reducció (compartiment catòdic) amb l’objectiu de generar un determinat corrent elèctric. En aquest estudi, bàsicament es mostra la posada en marxa d'una pila biològica per a l'eliminació de matèria orgànica i nitrogen de les aigües residuals.

Building Capacity in Developing Countries : OER for Food Safety

The Food Safety Knowledge Network (FSKN) was developed through the collaboration of Michigan State University and a professional network of international food industry retailers and manufacturers. The key objective of the FSKN project is to provide technical resources, in a cost effective way, in order to promote food safety in developing countries and for small and less developed companies. FSKN uses a competency based model including a framework, OERs, and assessments. These tools are being used to support face-to-face training, fully online training, and to gauge the learning outcomes of a series of pilot groups which were held in India, Egypt, and China.

Estimation of zero-sequence impedance of undergrounds cables for single-phase fault location in distribution systems with electric arc

This paper focus on the problem of locating single-phase faults in mixed distribution electric systems, with overhead lines and underground cables, using voltage and current measurements at the sending-end and sequence model of the network. Since calculating series impedance for underground cables is not as simple as in the case of overhead lines, the paper proposes a methodology to obtain an estimation of zero-sequence impedance of underground cables starting from previous single-faults occurred in the system, in which an electric arc occurred at the fault location. For this reason, the signal is previously pretreated to eliminate its peaks voltage and the analysis can be done working with a signal as close as a sinus wave as possible

A comparative analysis of two methods for the calculation of electric-field-induced perturbations to molecular vibration

Two common methods of accounting for electric-field-induced perturbations to molecular vibration are analyzed and compared. The first method is based on a perturbation-theoretic treatment and the second on a finite-field treatment. The relationship between the two, which is not immediately apparent, is made by developing an algebraic formalism for the latter. Some of the higher-order terms in this development are documented here for the first time. As well as considering vibrational dipole polarizabilities and hyperpolarizabilities, we also make mention of the vibrational Stark effec

A quantum molecular similarity analysis of changes in molecular electron density caused by basis set flotation and electric field application

Quantum molecular similarity (QMS) techniques are used to assess the response of the electron density of various small molecules to application of a static, uniform electric field. Likewise, QMS is used to analyze the changes in electron density generated by the process of floating a basis set. The results obtained show an interrelation between the floating process, the optimum geometry, and the presence of an external field. Cases involving the Le Chatelier principle are discussed, and an insight on the changes of bond critical point properties, self-similarity values and density differences is performed

Impact of antenna correlation on the capacity of multiantenna channels

This paper applies random matrix theory to obtain analytical characterizations of the capacity of correlated multiantenna channels. The analysis is not restricted to the popular separable correlation model, but rather it embraces a more general representation that subsumesmost of the channel models that have been treated in the literature. For arbitrary signal-to-noise ratios (SNR), the characterization is conducted in the regime of large numbers of antennas. For the low- and high-SNR regions, in turn, we uncover compact capacity expansions that are valid for arbitrary numbers of antennas and that shed insight on how antenna correlation impacts the tradeoffs between power, bandwidth and rate.

Capacity-achieving input covariance for single-user multi-antenna channels

We characterize the capacity-achieving input covariance for multi-antenna channels known instantaneously at the receiver and in distribution at the transmitter. Our characterization, valid for arbitrary numbers of antennas, encompasses both the eigenvectors and the eigenvalues. The eigenvectors are found for zero-mean channels with arbitrary fading profiles and a wide range of correlation and keyhole structures. For the eigenvalues, in turn, we present necessary and sufficient conditions as well as an iterative algorithm that exhibits remarkable properties: universal applicability, robustness and rapid convergence. In addition, we identify channel structures for which an isotropic input achieves capacity.

Capacity-approaching rate function for layered multiantenna architectures

The simultaneous use of multiple transmit and receive antennas can unleash very large capacity increases in rich multipath environments. Although such capacities can be approached by layered multi-antenna architectures with per-antenna rate control, the need for short-term feedback arises as a potential impediment, in particular as the number of antennas—and thus the number of rates to be controlled—increases. What we show, however, is that the need for short-term feedback in fact vanishes as the number of antennas and/or the diversity order increases. Specifically, the rate supported by each transmit antenna becomes deterministic and a sole function of the signal-to-noise, the ratio of transmit and receive antennas, and the decoding order, all of which are either fixed or slowly varying. More generally, we illustrate -through this specific derivation— the relevance of some established random CDMA results to the single-user multi-antenna problem.

Capacity to within one bit of a class of Gaussian multicast channels with interference

This paper studies the fundamental operational limits of a class of Gaussian multicast channels with an interference setting. In particular, the paper considers two base stations multicasting separate messages to distinct sets of users. In the presence of channel state information at the transmitters and at the respective receivers, the capacity region of the Gaussian multicast channel with interference is characterized to within one bit. At the crux of this result is an extension to the multicast channel with interference of the Han-Kobayashi or the Chong-Motani-Garg achievable region for the interference channel.

Asymptotic capacity of static multiuser channels with an unknown number of users

We examine a multiple-access communication system in which multiuser detection is performed without knowledge of the number of active interferers. Using a statistical-physics approach, we compute the single-user channel capacity and spectral efficiency in the large-system limit.

State capacity and military conflict

In 1500, Europe was composed of hundreds of statelets and principalities, with weak central authority,no monopoly over the legitimate use of violence, and overlapping jurisdictions. By 1800, only ahandful of powerful, centralized nation states remained. We build a model that explains both the emergenceof capable states and growing divergence between European powers. We argue that the impactof war was crucial for state building, and depended on: i) the financial cost of war, and ii) a country sinitial level of domestic political fragmentation. We emphasize the role of the "Military Revolution",which raised the cost of war. Initially, this caused more cohesive states to invest in state capacity, whilemore divided states rationally dropped out of the competition, causing divergence between Europeanstates. As the cost of war escalated further, all states engaged in a "race to the top" towards greater statebuilding.

Disability, capacity for work and the business cycle: An international perspective

An important policy issue in recent years concerns the number of people claimingdisability benefits for reasons of incapacity for work. We distinguish between workdisability , which may have its roots in economic and social circumstances, and healthdisability which arises from clear diagnosed medical conditions. Although there is a linkbetween work and health disability, economic conditions, and in particular the businesscycle and variations in the risk of unemployment over time and across localities, mayplay an important part in explaining both the stock of disability benefit claimants andinflows to and outflow from that stock. We employ a variety of cross?country andcountry?specific household panel data sets, as well as administrative data, to testwhether disability benefit claims rise when unemployment is higher, and also toinvestigate the impact of unemployment rates on flows on and off the benefit rolls. Wefind strong evidence that local variations in unemployment have an importantexplanatory role for disability benefit receipt, with higher total enrolments, loweroutflows from rolls and, often, higher inflows into disability rolls in regions and periodsof above?average unemployment. Although general subjective measures of selfreporteddisability and longstanding illness are also positively associated withunemployment rates, inclusion of self?reported health measures does not eliminate thestatistical relationship between unemployment rates and disability benefit receipt;indeed including general measures of health often strengthens that underlyingrelationship. Intriguingly, we also find some evidence from the United Kingdom and theUnited States that the prevalence of self?reported objective specific indicators ofdisability are often pro?cyclical that is, the incidence of specific forms of disability arepro?cyclical whereas claims for disability benefits given specific health conditions arecounter?cyclical. Overall, the analysis suggests that, for a range of countries and datasets, levels of claims for disability benefits are not simply related to changes in theincidence of health disability in the population and are strongly influenced by prevailingeconomic conditions. We discuss the policy implications of these various findings.

Forward induction and the excess capacity puzzle: An experimental investigation

While the theoretical industrial organization literature has long arguedthat excess capacity can be used to deter entry into markets, there islittle empirical evidence that incumbent firms effectively behave in thisway. Bagwell and Ramey (1996) propose a game with a specific sequence ofmoves and partially-recoverable capacity costs in which forward inductionprovides a theoretical rationalization for firm behavior in the field. Weconduct an experiment with a game inspired by their work. In our data theincumbent tends to keep the market, in contrast to what the forwardinduction argument of Bagwell and Ramey would suggest. The results indicatethat players perceive that the first mover has an advantage without havingto pre-commit capacity. In our game, evolution and learning do not driveout this perception. We back these claims with data analysis, atheoretical framework for dynamics, and simulation results.

Buffer Capacity Allocation: A method to QoS support on MPLS networks

This paper describes an optimized model to support QoS by mean of Congestion minimization on LSPs (Label Switching Path). In order to perform this model, we start from a CFA (Capacity and Flow Allocation) model. As this model does not consider the buffer size to calculate the capacity cost, our model- named BCA (Buffer Capacity Allocation)- take into account this issue and it improve the CFA performance. To test our proposal, we perform several simulations; results show that BCA model minimizes LSP congestion and uniformly distributes flows on the network

Access by Capacity and Peak-Load Pricing

Several European telecommunications regulatory agencies have recently introduced a fixed capacity charge (flat rate) to regulate access to the incumbent's network. The purpose of this paper is to show that the optimal capacity charge and the optimal access-minute charge analysed by Armstrong, Doyle, and Vickers (1996) have a similar structure and imply the same payment for the entrant. I extend the analysis tothe case where there is a competitor with market power. In this case, the optimalcapacity charge should be modified to avoid that the entrant cream-skims the market,fixing a longer or a shorter peak period than the optimal. Finally, I consider a multiproduct setting, where the effect of the product differentiation is exacerbated.