Efficient energy transfer from Si clusters to Er3+ in complex silicate glasses

We present an extensive study of the structural and optical emission properties in aluminum silicates and soda-lime silicates codoped with Si nanoclusters (Si-nc) and Er. Si excess of 5 and 15¿at.¿% and Er concentrations ranging from 2×1019 up to 6×1020¿cm¿3 were introduced by ion implantation. Thermal treatments at different temperatures were carried out before and after Er implantation. Structural characterization of the resulting structures was performed to obtain the layer composition and the size distribution of Si clusters. A comprehensive study has been carried out of the light emission as a function of the matrix characteristics, Si and Er contents, excitation wavelength, and power. Er emission at 1540¿nm has been detected in all coimplanted glasses, with similar intensities. We estimated lifetimes ranging from 2.5¿to¿12¿ms (depending on the Er dose and Si excess) and an effective excitation cross section of about 1×10¿17¿cm2 at low fluxes that decreases at high pump power. By quantifying the amount of Er ions excited through Si-nc we find a fraction of 10% of the total Er concentration. Upconversion coefficients of about 3×10¿18¿cm¿3¿s¿1 have been found for soda-lime glasses and one order of magnitude lower in aluminum silicates.

Intense green-yellow electroluminescence from Tb+-implanted silicon-rich silicon nitride/oxide light emitting devices

High optical power density of 0.5 mW/cm2, external quantum efficiency of 0.1%, and population inversion of 7% are reported from Tb+-implanted silicon-rich silicon nitride/oxide light emitting devices. Electrical and electroluminescence mechanisms in these devices were investigated. The excitation cross section for the 543 nm Tb3+ emission was estimated under electrical pumping, resulting in a value of 8.2 × 10−14 cm2, which is one order of magnitude larger than one reported for Tb3+:SiO2 light emitting devices. These results demonstrate the potentiality of Tb+-implanted silicon nitride material for the development of integrated light sources compatible with Si technology.

A simple method for the simulation of multiple elastic scattering of electrons

A screened Rutherford cross section is modified by means of a correction factor to obtain the proper transport cross section computed by partial¿wave analysis. The correction factor is tabulated for electron energies in the range 0¿100 keV and for elements in the range from Z=4 to 82. The modified screened Rutherford cross section is shown to be useful as an approximation for the simulation of plural and multiple scattering. Its performance and limitations are exemplified for electrons scattered in Al and Au.

Characterisation of the LMS200 laser beam under the influence of blockage surfaces. Influence on 3D scanning of tree orchards

The geometric characterisation of tree orchards is a high-precision activity comprising the accurate measurement and knowledge of the geometry and structure of the trees. Different types of sensors can be used to perform this characterisation. In this work a terrestrial LIDAR sensor (SICK LMS200) whose emission source was a 905-nm pulsed laser diode was used. Given the known dimensions of the laser beam cross-section (with diameters ranging from 12 mm at the point of emission to 47.2 mm at a distance of 8 m), and the known dimensions of the elements that make up the crops under study (flowers, leaves, fruits, branches, trunks), it was anticipated that, for much of the time, the laser beam would only partially hit a foreground target/object, with the consequent problem of mixed pixels or edge effects. Understanding what happens in such situations was the principal objective of this work. With this in mind, a series of tests were set up to determine the geometry of the emitted beam and to determine the response of the sensor to different beam blockage scenarios. The main conclusions that were drawn from the results obtained were: (i) in a partial beam blockage scenario, the distance value given by the sensor depends more on the blocked radiant power than on the blocked surface area; (ii) there is an area that influences the measurements obtained that is dependent on the percentage of blockage and which ranges from 1.5 to 2.5 m with respect to the foreground target/object. If the laser beam impacts on a second target/object located within this range, this will affect the measurement given by the sensor. To interpret the information obtained from the point clouds provided by the LIDAR sensors, such as the volume occupied and the enclosing area, it is necessary to know the resolution and the process for obtaining this mesh of points and also to be aware of the problem associated with mixed pixels.

Monte Carlo simulation of x-ray spectra generated by kilo-electron-volt electrons

We present a general algorithm for the simulation of x-ray spectra emitted from targets of arbitrary composition bombarded with kilovolt electron beams. Electron and photon transport is simulated by means of the general-purpose Monte Carlo code PENELOPE, using the standard, detailed simulation scheme. Bremsstrahlung emission is described by using a recently proposed algorithm, in which the energy of emitted photons is sampled from numerical cross-section tables, while the angular distribution of the photons is represented by an analytical expression with parameters determined by fitting benchmark shape functions obtained from partial-wave calculations. Ionization of K and L shells by electron impact is accounted for by means of ionization cross sections calculated from the distorted-wave Born approximation. The relaxation of the excited atoms following the ionization of an inner shell, which proceeds through emission of characteristic x rays and Auger electrons, is simulated until all vacancies have migrated to M and outer shells. For comparison, measurements of x-ray emission spectra generated by 20 keV electrons impinging normally on multiple bulk targets of pure elements, which span the periodic system, have been performed using an electron microprobe. Simulation results are shown to be in close agreement with these measurements.

Interest rate determination in the interbank market

The purpose of this paper is to study the determinants of equilibrium in the market for daily funds. We use the EONIA panel database which includes daily information on the lending rates applied by contributing commercial banks. The data clearly shows an increase in both the time series volatility and the cross section dispersion of rates towards the end of the reserve maintenance period. These increases are highly correlated. With respect to quantities, we find that the volume of trade as well as the use of the standing facilities are also larger at the end of the maintenance period. Our theoretical model shows how the operational framework of monetary policy causes a reduction in the elasticity of the supply of funds by banks throughout the reserve maintenance period. This reduction in the elasticity together with market segmentation and heterogeneity are able to generate distributions for the interest rates and quantities traded with the same properties as in the data.

The demand elasticity on tolled motorways

This paper analyses the elasticities of demand in tolled motorways in Spain with respect to the main variables influencing it. The demand equation is estimated using a panel data set where the cross-section observations correspond to the different Spanish tolled motorways sections, and the temporal dimension ranges from the beginning of the eighties until the end of the nineties. The results show a high elasticity with respect to the economic activity level. The average elasticity with respect to petrol price falls around -0.3, while toll elasticities clearly vary across motorway sections. These motorway sections are classified into four groups according to the estimated toll elasticity with values that range from -0.21 for the most inelastic to -0.83 for the most elastic. The main factors that explain such differences are the quality of the alternative road and the length of the section. The long-term effect is about 50 per cent higher than the short term one; however, the period of adjustment is relatively short.

Investor protection, risk sharing and inequality

This paper studies the relationship between investor protection, financial risk sharing and income inequality. In the presence of market frictions, better protection makes investors more willing to take on entrepreneurial risk while lending to firms. This implies lower cost of external finance and better risk sharing between financiers and entrepreneurs. Investor protection, by boosting the market for risk sharing plays the twofold role of encouraging agents to undertake risky enterprises and providing them with insurance. By increasing the number of risky projects, it raises income inequality. By extending insurance to more agents, it reduces it. As a result, the relationship between the size of the market for risk sharing and income inequality is hump-shaped. Empirical evidence from a cross-section of sixty-eight countries, and a panel of fifty countries over the period 1976-2000, supports the predictions of the model.

Propietats d'absorció bifotònica del tetrafenilporficè i el seu complex de palladi: potencials sensibilitzadors per a Teràpia Fotodinàmica bifotònica.

Estudi elaborat a partir d’una estada a la Universitat de Aarhus, Dinamarca, durant juliol 2006. En el present treball s’investiguen, per primer cop, les propietats de absorció bifotòniques del fotosensibilitzador 2,7,12,17-tetrafenilporficè (TPPo) i del seu complex de pal•ladi (II) (PdTPPo). Ambos compostos han rebut molta atenció com a possibles otosensibilitzadors per a Teràpia Fotodinàmica (TFD). S’utilitza la detecció de la fosforescència de l’oxigen singlet, centrada a 1270 nm i produïda per l’absorció de dos fotons, per quantificar la magnitud de la secció d’absorció bifotònica, "delta", dels porficèns estudiats. Els experiments se han dut a terme en el marge espectral 750-850 nm i a l’infraroig proper a 1100nm. Aquestes longituds d’ona corresponen a les zones d’absorció bifotònica en les bandes de Soret i Q. Les propietats bifotòniques obtingudes es comparen i contrasten amb les dades conegudes de la tetrafenilporfirina (TPP), isòmer estructural del tetrafenilporficè però amb més gran simetria, i es troba que en la banda de Soret (que coincideix amb la regió de la pell més transparent) els valors de delta per el TPPo i PdTPPo son aproximadament 2000 GM en el màxim, pràcticament cent vegades més grans que per la TPP. A més a més, aquestos valors son dos ordres de magnitud més grans que els obtinguts a l’irradiar a 1100 nm (bandes Q). Aquestes observacions es poden explicar mitjançant la amplificació per ressonància deguda a la presència de transicions monofotòniques ressonants en la regió de les bandes Q. Els elevats valors de "delta" obtinguts per els tetrafenilporficèns estudiats junt a les principals característiques que aquestos presenten (elevat rendiment de formació d’oxigen singlet, estabilitat química i fotoquímica, absència de citotoxicitat,...) qualifiquen al TPPo y PdTPPo com a possibles fotosensibilitzadors per a Teràpia Fotodinàmica Bifotònica.

Democracy and the curse of natural resources

We propose a theoretical model to explain empirical regularities related to the curse of natural resources. This is an explicitly political model which emphasizes the behavior and incentives of politicians. We extend the standard voting model to give voters political control beyond the elections. This gives rise to a new restriction into our political economy model: policies should not give rise to a revolution. Our model clarifies when resource discoveries might lead to revolutions, namely, in countries with weak institutions. Natural resources may be bad for democracy by harming political turnover. Our model also suggests a non-linear dependence of human capital on natural resources. For low levels of democracy human capital depends negatively on natural resources, while for high levels of democracy the dependence is reversed. This theoretical finding is corroborated in both cross section and panel data regressions.

Locations and Relocations:Modelling, Determinants, and Interrelations

Empirical studies on industrial location do not typically distinguish between new and relocated establishments. This paper addresses this shortcoming using data on the frequency of these events in municipalities of the same economic-administrative region. This enables us to test not only for differences in their determinants but also for interrelations between start-ups and relocations. Estimates from count regression models for cross-section and panel data show that, although partial effects differ, common patterns arise in “institutional” and “neoclassical” explanatory factors. Also, start-ups and relocations are positive but asymmetrically related. JEL classification: C25, R30, R10. Keywords: cities, count data models, industrial location

Deconstructing Shocks and Persistence in OECD Real Exchange Rates

This paper analyzes the persistence of shocks that affect the real exchange rates for a panel of seventeen OECD developed countries during the post-Bretton Woods era. The adoption of a panel data framework allows us to distinguish two different sources of shocks, i.e. the idiosyncratic and the common shocks, each of which may have di¤erent persistence patterns on the real exchange rates. We first investigate the stochastic properties of the panel data set using panel stationarity tests that simultaneously consider both the presence of cross-section dependence and multiple structural breaks that have not received much attention in previous persistence analyses. Empirical results indicate that real exchange rates are non-stationary when the analysis does not account for structural breaks, although this conclusion is reversed when they are modeled. Consequently, misspecification errors due to the non-consideration of structural breaks leads to upward biased shocks' persistence measures. The persistence measures for the idiosyncratic and common shocks have been estimated in this paper always turn out to be less than one year.

New evidence of the real interest rate parity for OECD countries using panel unit root tests with breaks

This paper tests for real interest parity (RIRP) among the nineteen major OECD countries over the period 1978:Q2-1998:Q4. The econometric methods applied consist of combining the use of several unit root or stationarity tests designed for panels valid under cross-section dependence and presence of multiple structural breaks. Our results strongly support the fulfillment of the weak version of the RIRP for the studied period once dependence and structural breaks are accounted for.

Agronomic and commercial performance of four Spanish carob cultivars

The carob tree (Ceratonia siliqua) shows interesting prospects for some coastal Mediterranean growing areas and is widely used for industrial, agricultural, and ornamental purposes. It can be an alternative crop adapted to part-time farming and can also be used to regenerate vegetation in areas with a mild climate and erosion problems. Four Spanish carob cultivars were examined (Banya de Cabra, Duraio, Matalafera, and Rojal) to determine the one that performed the best for planting new orchards in northeastern Spain (Catalonia). The trees in this rain-fed trial (average rainfall of 500 mm) were planted in 1986 using seedling rootstocks that were budded in 1987. The trees were trained using the free-vase system and were spaced 8 x 9 m (138 trees/ha including 12% pollinators). The results showed that ‘Rojal’ was the earliest bearing cultivar. However, no significant differences were observed for cumulative pod production 18 years after budding. With respect to cumulative seed yield, ‘Duraio’ had the highest production (95 kg/tree). The lowest tree vigor (trunk cross-section) was observed in ‘Matalafera’. ‘Rojal’ trees produced the largest pods (average fruit weight of 18.9 g) and lowest seed content (11.8%), while ‘Banya de Cabra’ and ‘Duraio’ produced the smallest fruit (weighing 15.3 and 16.2 g, respectively) with the highest seed content (15.2% and 17.3%, respectively). Gum content, expressed as a percentage of the dry weight, was highest in ‘Duraio’ (56.9%) and was lowest in ‘Rojal’ (54.1%). Thus, in terms of kernel and pod production, ‘Duraio’ appeared to be the best-performing female cultivar for planting new carob orchards

The impact of agglomeration effects and accessibility on wages

This paper contributes to the empirical literature on the effects of agglomeration and road accessibility on productivity of firms by looking at the case of Spain. We approach productivity indirectly by using individual wages allocated at the NUTS III level. We use a repeated cross-section of individual micro-data for the years 1995, 2002 and 2006. The availability of interprovincial travel time data for each of the three years allows controlling for transport improvements over the period by using a market potential variable. Additionally, agglomeration is approached by employment density and we control for localization economies, human capital externalities and a large set of individual and workplace characteristics. Estimating by instrumental variables, our results show a positive and significant effect of market accessibility on wages and non linear effect for employment density.