Structural decomposition analysis and input-output subsystems: An application to Spanish CO2 emissions

Analysis of gas emissions by the input-output subsystem approach provides detailed insight into pollution generation in an economy. Structural decomposition analysis, on the other hand, identifies the factors behind the changes in key variables over time. Extending the input-output subsystem model to account for the changes in these variables reveals the channels by which environmental burdens are caused and transmitted throughout the production system. In this paper we propose a decomposition of the changes in the components of CO2 emissions captured by an input-output subsystems representation. The empirical application is for the Spanish service sector, and the economic and environmental data are for years 1990 and 2000. Our results show that services increased their CO2 emissions mainly because of a rise in emissions generated by non-services to cover the final demand for services. In all service activities, the decomposed effects show an increase in CO2 emissions due to a decrease in emission coefficients (i.e., emissions per unit of output) compensated by an increase in emissions caused both by the input-output coefficients and the rise in demand for services. Finally, large asymmetries exist not only in the quantitative changes in the CO2 emissions of the various services but also in the decomposed effects of these changes. Keywords: structural decomposition analysis, input-output subsystems, CO2 emissions, service sector.

Water Reallocation in the Input-Output Model

Water reallocation between economic agents has been –and continues to be- the subject of a considerable amount of research. This paper proposes a method for evaluating how water is reallocated within the economy in response to changes in final demand and changes in the technical water needs of activities and consumers. The empirical application, which is for the Catalan economy, shows important asymmetries in the effects that exogenous inflows and changes in water technical requirements cause on water reallocation. In the process of water distribution, exogenous inflows mostly benefit agriculture and damage private consumers. On the other hand, increases in technical water requirements have negative effects on agriculture and positive effects on the other production activities. The results of the study suggest that agriculture is an important activity not only in terms of water distribution but also in terms of water reallocation due to changes in final demand and technical water needs. Keywords: Water reallocation, water distribution, exogenous shock, technical water needs.

Los sectores agroalimentarios español y catalán, un análisis comparativo a través de la tabla input-output

En este trabajo se pretende ofrecer una visión del sector Agroalimentario (SAA) catalán, y muy especialmente, de cual es su situación comparativa dentro del SAA español. Analizando por medio de las tablas input-output aquellas ramas del SAA que actúan como motor en cada una de las economías estudiadas, al mismo tiempo que se detectan las analogías o divergencias entre las dos realidades, la autónoma y la nacional. Los indicadores utilizados para el estudio de la tabla input-output son: Chenery-Watanabe, Rasmussen, Backward linkages, Forward linkdages, multiplicador renta y multiplicador de las importaciones.

Identifying strategies for mitigating the global warming impact of the EU-25 economy using a multi-objective input-output approach

Global warming mitigation has recently become a priority worldwide. A large body of literature dealing with energy related problems has focused on reducing greenhouse gases emissions at an engineering scale. In contrast, the minimization of climate change at a wider macroeconomic level has so far received much less attention. We investigate here the issue of how to mitigate global warming by performing changes in an economy. To this end, we make use of a systematic tool that combines three methods: linear programming, environmentally extended input output models, and life cycle assessment principles. The problem of identifying key economic sectors that contribute significantly to global warming is posed in mathematical terms as a bi criteria linear program that seeks to optimize simultaneously the total economic output and the total life cycle CO2 emissions. We have applied this approach to the European Union economy, finding that significant reductions in global warming potential can be attained by regulating specific economic sectors. Our tool is intended to aid policymakers in the design of more effective public policies for achieving the environmental and economic targets sought.

Deuda hídrica y escasez. Análisis MRIO del uso del agua en Andalucía

El objetivo del presente trabajo es realizar un análisis regional y sectorial del Balance Neto de agua virtual asociada al comercio entre la región de Andalucía y el resto de España para el año 2005. Para ello, desarrollamos una metodología que nos permite efectuar un análisis comparativo del uso del agua en ambas regiones, en cuanto al impacto de su producción sectorial y de su demanda final. Incluimos en el marco metodológico el nuevo concepto de Agua Virtual, ya que está tomando gran relevancia en la arena de la Gestión Hídrica. La base del marco metodológico es el análisis Input-Output. En particular, construimos un modelo Input-Output Multi-Regional (MRIO) para las regiones consideradas. Esta herramienta es el método más utilizado para los estudios en los que se asigna la responsabilidad del uso de recursos de acuerdo a la demanda final, localizada territorialmente, de cada rama productiva. Entre otras ventajas, nos permite analizar los vínculos interregionales e intersectoriales de las regiones consideradas. La incorporación de la técnica de la integración vertical o subsistemas a nivel interregional nos permite un enfoque alternativo para el Balance Neto resultante, en el que puede examinarse la importancia de una determinada rama productiva de acuerdo a su influencia en el resto de sectores de las diversas regiones. No tenemos constancia de que este enfoque haya sido utilizado con anterioridad en los análisis MRIO aplicados al estudio de los impactos medioambientales incorporados en el comercio. Tampoco la tenemos sobre la aplicación de los MRIO de forma general para estos impactos a nivel interregional de la economía española. Los estudios previos sobre el uso del agua de la región andaluza se han centrado en el comercio internacional ante la dificultad de hacer un análisis exhaustivo a nivel sectorial utilizando las estadísticas de transporte por carretera. Sin embargo, en términos monetarios, el comercio interior de la región con el resto de España supone un 52% de las “exportaciones” y un 62% de las “importaciones”. Por lo tanto, a nivel práctico, este trabajo aporta a los estudios desarrollados con anterioridad la esencial perspectiva del comercio interior. Los resultados esperados contribuyen a mejorar una información de extrema relevancia para una posible reforma estructural de la economía y el comercio interregional andaluz acorde a un mejor uso del recurso agua.

Input diffusion and the evolution of production networks

What determines which inputs are initially considered and eventually adopted in the productionof new or improved goods? Why are some inputs much more prominent than others? We modelthe evolution of input linkages as a process where new producers first search for potentially usefulinputs and then decide which ones to adopt. A new product initially draws a set of 'essentialsuppliers'. The search stage is then confined to the network neighborhood of the latter, i.e., to theinputs used by the essential suppliers. The adoption decision is driven by a tradeoff between thebenefits accruing from input variety and the costs of input adoption. This has important implicationsfor the number of forward linkages that a product (input variety) develops over time. Inputdiffusion is fostered by network centrality ? an input that is initially represented in many networkneighborhoods is subsequently more likely to be adopted. This mechanism also delivers a powerlaw distribution of forward linkages. Our predictions continue to hold when varieties are aggregatedinto sectors. We can thus test them, using detailed sectoral US input-output tables. We showthat initial network proximity of a sector in 1967 significantly increases the likelihood of adoptionthroughout the subsequent four decades. The same is true for rapid productivity growth in aninput-producing sector. Our empirical results highlight two conditions for new products to becomecentral nodes: initial network proximity to prospective adopters, and technological progress thatreduces their relative price. Semiconductors met both conditions.

The missing link in key sectors analysis

In general terms key sectors analysis aims at identifying the role, or impact, that the existence of a productive sector has in the economy. Quite a few measures, indicators and methodologies of varied complexity have been proposed in the literature, from multiplier sums to extraction methods, but not without debate about their properties and their information content. All of them, to our knowledge, focus exclusively on the interdependence effects that result from the input-output structure of the economy. By so doing the simple input-output approach misses critical links beyond the interindustry ones. A productive sector’s role is that of producing but also that of generating and distributing income among primary factors as a result of production. Thus when measuring a sector’s role, the income generating process cannot and should not be omitted if we want to better elucidate the sector’ economic role. A simple way to make the missing income link explicit is to use the SAM (Soci

Sensitivity of simulation results to competing SAM updates

Recently there has been a renewed research interest in the properties of non survey updates of input-output tables and social accounting matrices (SAM). Along with the venerable and well known scaling RAS method, several alternative new procedures related to entropy minimization and other metrics have been suggested, tested and used in the literature. Whether these procedures will eventually substitute or merely complement the RAS approach is still an open question without a definite answer. The performance of many of the updating procedures has been tested using some kind of proximity or closeness measure to a reference input-output table or SAM. The first goal of this paper, in contrast, is the proposal of checking the operational performance of updating mechanisms by way of comparing the simulation results that ensue from adopting alternative databases for calibration of a reference applied general equilibrium model. The second goal is to introduce a new updatin! g procedure based on information retrieval principles. This new procedure is then compared as far as performance is concerned to two well-known updating approaches: RAS and cross-entropy. The rationale for the suggested cross validation is that the driving force for having more up to date databases is to be able to conduct more current, and hopefully more credible, policy analyses.

Nota metodológica sobre la determinación de sectores "clave" en el consumo de energía final: una primera aproximación al caso español

En este artículo analizamos la determinación de sectores "clave" en el consumo de energía final. Enfocamos esta cuestión desde una perspectiva input-output, diseñando una metodología basada en las elasticidades de la demanda del consumo de energía final. A modo de ejercicio, aplicamos la metodología a la economía española. El análisis permite señalar la mayor o menor relevancia de los distintos sectores en el consumo energético final, indicando qué sectores merecen mayor atención en el caso español y apuntando las implicaciones para la política energética.

Methodological note about the determination of key sectors in final energy consumption: a preliminary approach to the Spanish case

In this paper we analyze the determination of "key" sectors in the final energy consumption. We approach this issue from an input-output perspective and we design a methodology based on the elasticities of the demands of final energy consumption. As an exercise, we apply the proposed methodology to the Spanish economy. The analysis allows us to indicate the greater or lesser relevance of the different sectors in the consumption of final energy, pointing out which sectors deserve greater attention in the Spanish case and showing the implications for energy policy.

An analysis of strategic paths through the decomposition of total factor productivity: the case of Spanish savings banks

The Spanish savings banks attracted quite a considerable amount of interest within the scientific arena, especially subsequent to the disappearance of the regulatory constraints during the second decade of the 1980s. Nonetheless, a lack of research identified with respect to mainstream paths given by strategic groups, and the analysis of the total factor productivity. Therefore, on the basis of the resource-based view of the firm and cluster analysis, we make use of changes in structure and performance ratios in order to identify the strategic groups extant in the sector. We attain a threeways division, which we link with different input-output specifications defining strategic paths. Consequently, on the basis of these three dissimilar approaches we compute and decompose a Hicks-Moorsteen total factor productivity index. Obtained results put forward an interesting interpretation under a multi-strategic approach, together with the setbacks of employing cluster analysis within a complex strategic environment. Moreover, we also propose an ex-post method of analysing the outcomes of the decomposed total factor productivity index that could be merged with non-traditional techniques of forming strategic groups, such as cognitive approaches.

The Role of supply constraints in multiplier analysis

Multiplier analysis based upon the information contained in Leontief's inverse is undoubtedly part of the core of the input-output methodology and numerous applications an extensions have been developed that exploit its informational content. Nonetheless there are some implicit theoretical assumptions whose implications have perhaps not been fully assessed. This is the case of the 'excess capacity' assumption. Because of this assumption resources are available as needed to adjust production to new equilibrium states. In real world applications, however, new resources are scarce and costly. Supply constraints kick in and hence resource allocation needs to take them into account to really assess the effect of government policies. Using a closed general equilibrium model that incorporates supply constraints, we perform some simple numerical exercises and proceed to derive a 'constrained' multiplier matrix that can be compared with the standard 'unrestricted' multiplier matrix. Results show that the effectiveness of expenditure policies hinges critically on whether or not supply constraints are considered.

Configuración de la entrada/salida paralela para el cómputo de altas prestaciones

La E/S Paralela es un área de investigación que tiene una creciente importancia en el cómputo de Altas Prestaciones. Si bien durante años ha sido el cuello de botella de los computadores paralelos en la actualidad, debido al gran aumento del poder de cómputo, el problema de la E/S se ha incrementado y la comunidad del Cómputo de Altas Prestaciones considera que se debe trabajar en mejorar el sistema de E/S de los computadores paralelos, para lograr cubrir las exigencias de las aplicaciones científicas que usan HPC. La Configuración de la Entrada/Salida (E/S) Paralela tiene una gran influencia en las prestaciones y disponibilidad, por ello es importante “Analizar configuraciones de E/S paralela para identificar los factores claves que influyen en las prestaciones y disponibilidad de la E/S de Aplicaciones Científicas que se ejecutan en un clúster”. Para realizar el análisis de las configuraciones de E/S se propone una metodología que permite identificar los factores de E/S y evaluar su influencia para diferentes configuraciones de E/S formada por tres fases: Caracterización, Configuración y Evaluación. La metodología permite analizar el computador paralelo a nivel de Aplicación Científica, librerías de E/S y de arquitectura de E/S, pero desde el punto de vista de la E/S. Los experimentos realizados para diferentes configuraciones de E/S y los resultados obtenidos indican la complejidad del análisis de los factores de E/S y los diferentes grados de influencia en las prestaciones del sistema de E/S. Finalmente se explican los trabajos futuros, el diseño de un modelo que de soporte al proceso de Configuración del sistema de E/S paralela para aplicaciones científicas. Por otro lado, para identificar y evaluar los factores de E/S asociados con la disponibilidad a nivel de datos, se pretende utilizar la Arquitectura Tolerante a Fallos RADIC.

Linear Aggregation In The Social Accounting Matrix Framework

In economic literature, information deficiencies and computational complexities have traditionally been solved through the aggregation of agents and institutions. In inputoutput modelling, researchers have been interested in the aggregation problem since the beginning of 1950s. Extending the conventional input-output aggregation approach to the social accounting matrix (SAM) models may help to identify the effects caused by the information problems and data deficiencies that usually appear in the SAM framework. This paper develops the theory of aggregation and applies it to the social accounting matrix model of multipliers. First, we define the concept of linear aggregation in a SAM database context. Second, we define the aggregated partitioned matrices of multipliers which are characteristic of the SAM approach. Third, we extend the analysis to other related concepts, such as aggregation bias and consistency in aggregation. Finally, we provide an illustrative example that shows the effects of aggregating a social accounting matrix model.