27 resultados para Discharge Limit
Resumo:
Thin films of nanostructured silicon (ns-Si:H) were deposited by plasma-enhanced chemical vapor deposition in the presence of silicon nanoparticles at 100 C substrate temperature using silane and hydrogen gas mixture under continuous wave (cw) plasma conditions. The nanostructure of the films has been demonstrated by diverse ways: transmission electron microscopy, Raman spectroscopy and x-ray diffraction, which have shown the presence of ordered silicon clusters (1!=2 nm) embedded in an amorphous silicon matrix. Due to the presence of these ordered domains, the films crystallize faster than standard hydrogenated amorphous silicon samples, as evidenced by electrical measurements during the thermal annealing.
Resumo:
We present an ellipsometric technique and ellipsometric analysis of repetitive phenomena, based on the experimental arrangement of conventional phase modulated ellipsometers (PME) c onceived to study fast surface phenomena in repetitive processes such as periodic and triggered experiments. Phase modulated ellipsometry is a highly sensitive surface characterization technique that is widely used in the real-time study of several processes such as thin film deposition and etching. However, fast transient phenomena cannot be analyzed with this technique because precision requirements limit the data acquisition rate to about 25 Hz. The presented new ellipsometric method allows the study of fast transient phenomena in repetitive processes with a time resolution that is mainly limited by the data acquisition system. As an example, we apply this new method to the study of surface changes during plasma enhanced chemical vapor deposition of amorphous silicon in a modulated radio frequency discharge of SiH4. This study has revealed the evolution of the optical parameters of the film on the millisecond scale during the plasma on and off periods. The presented ellipsometric method extends the capabilities of PME arrangements and permits the analysis of fast surface phenomena that conventional PME cannot achieve.
Resumo:
Spherical carbon coated iron particles of nanometric diameter in the 510 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 58·10 4 Pa of He). The particles exhibit a crystalline dense iron core with an average diameter 7.4 ± 2.0 nm surrounded by a sealed carbon shell, shown by transmission electron microscopy (TEM), selected-area diffrac- tion (SAED), energy-dispersive X-ray analysis (STEM-EDX) and electron energy loss spectroscopy (EELS). The SAED, EDX and EELS results indicate a lack of traces of core oxidized phases showing an efficient protection role of the carbon shell. The magnetic properties of the nanoparticles have been investigated in the 5300 K temperature range using a superconducting quantum interference device (SQUID). The results reveal a superparamagnetic behaviour with an average monodomain diameter of 7.6 nm of the nanoparticles. The zero field cooled and field cooled (ZFC-FC)magnetization curves show a blocking temperature (TB)at room temperature very suitable for biomedical applications (drug delivery, magnetic resonance imaging MRI, hyperthermia).
Resumo:
Background: The aim of this study was to evaluate how hospital capacity was managed focusing on standardizing the admission and discharge processes. Methods: This study was set in a 900-bed university affiliated hospital of the National Health Service, near Barcelona (Spain). This is a cross-sectional study of a set of interventions which were gradually implemented between April and December 2008. Mainly, they were focused on standardizing the admission and discharge processes to improve patient flow. Primary administrative data was obtained from the 2007 and 2009 Hospital Database. Main outcome measures were median length of stay, percentage of planned discharges, number of surgery cancellations and median number of delayed emergency admissions at 8:00 am. For statistical bivariate analysis, we used a Chi-squared for linear trend for qualitative variables and a Wilcoxon signed ranks test and a Mann–Whitney test for non-normal continuous variables. Results: The median patients’ global length of stay was 8.56 days in 2007 and 7.93 days in 2009 (p<0.051). The percentage of patients admitted the same day as surgery increased from 64.87% in 2007 to 86.01% in 2009 (p<0.05). The number of cancelled interventions due to lack of beds was 216 patients in 2007 and 42 patients in 2009. The median number of planned discharges went from 43.05% in 2007 to 86.01% in 2009 (p<0.01). The median number of emergency patients waiting for an in-hospital bed at 8:00 am was 5 patients in 2007 and 3 patients in 2009 (p<0.01). Conclusions: In conclusion, standardization of admission and discharge processes are largely in our control. There is a significant opportunity to create important benefits for increasing bed capacity and hospital throughput.
Resumo:
Background: The aim of this study was to evaluate how hospital capacity was managed focusing on standardizing the admission and discharge processes. Methods: This study was set in a 900-bed university affiliated hospital of the National Health Service, near Barcelona (Spain). This is a cross-sectional study of a set of interventions which were gradually implemented between April and December 2008. Mainly, they were focused on standardizing the admission and discharge processes to improve patient flow. Primary administrative data was obtained from the 2007 and 2009 Hospital Database. Main outcome measures were median length of stay, percentage of planned discharges, number of surgery cancellations and median number of delayed emergency admissions at 8:00¿am. For statistical bivariate analysis, we used a Chi-squared for linear trend for qualitative variables and a Wilcoxon signed ranks test and a Mann¿Whitney test for non-normal continuous variables. Results:The median patients' global length of stay was 8.56 days in 2007 and 7.93 days in 2009 (p<0.051). The percentage of patients admitted the same day as surgery increased from 64.87% in 2007 to 86.01% in 2009 (p<0.05). The number of cancelled interventions due to lack of beds was 216 patients in 2007 and 42 patients in 2009. The median number of planned discharges went from 43.05% in 2007 to 86.01% in 2009 (p<0.01). The median number of emergency patients waiting for an in-hospital bed at 8:00¿am was 5 patients in 2007 and 3 patients in 2009 (p<0.01). Conclusions: In conclusion, standardization of admission and discharge processes are largely in our control. There is a significant opportunity to create important benefits for increasing bed capacity and hospital throughput.
Resumo:
We consider a model for a damped spring-mass system that is a strongly damped wave equation with dynamic boundary conditions. In a previous paper we showed that for some values of the parameters of the model, the large time behaviour of the solutions is the same as for a classical spring-mass damper ODE. Here we use spectral analysis to show that for other values of the parameters, still of physical relevance and related to the effect of the spring inner viscosity, the limit behaviours are very different from that classical ODE
Resumo:
The regulation of speed limits in the US had been centralized at the federal level since 1974, until decisions were devolved to the states in 1995. However, the centralization debate has reemerged in recent years. Here, we conduct the first econometric analysis of the determinants of speed limit laws. By using economic, geographic and political variables, our results suggest that geography -which affects private mobility needs and preferences- is the main factor influencing speed limit laws. We also highlight the role played by political ideology, with Republican constituencies being associated with higher speed limits. Furthermore, we identify the presence of regional and time dependence effects. By contrast, poor road safety outcomes do not impede the enactment of high speed limits. Overall, we present the first evidence of the role played by geographical, ideological and regional characteristics, which provide us with a better understanding of the formulation of speed limit policies.
Resumo:
Background and objective: We aimed to identify the frequency of, reasons for and risk factors associated with additional healthcare visits and rehospitalizations (healthcare interactions) by patients with community-acquired pneumonia (CAP) within 30 days of hospital discharge. Methods: Observational analysis of a prospective cohort of adults hospitalized with CAP at a tertiary hospital (2007-2009). Additional healthcare interactions were defined as the visits to a primary care centre or emergency department and hospital readmissions within 30 days of discharge. Results: Of the 934 hospitalized patients with CAP, 282 (34.1%) had additional healthcare interactions within 30 days of hospital discharge: 149 (52.8%) needed an additional visit to their primary care centre and 177 (62.8%) attended the emergency department. Seventy-two (25.5%) patients were readmitted to hospital. The main reasons for additional healthcare interactions were worsening of signs or symptoms of CAP and new or worsening comorbid conditions independent of pneumonia, mainly cardiovascular and pulmonary diseases. The only independent factor associated with visits to primary care centre or emergency department was alcohol abuse (odds ratio [OR] = 1.65; 95% confidence interval [CI]: 1.03-2.64). Prior hospitalization (≤ 90 days) (OR = 2.47; 95% CI: 1.11-5.52) and comorbidities (OR = 3.99; 95% CI: 1.12-14.23) were independently associated with rehospitalization. Conclusions: Additional healthcare visits and rehospitalizations within 30 days of hospital discharge are common in patients with CAP. This is mainly due to a worsening of signs or symptoms of CAP and/or comorbid conditions. These findings may have implications for discharge planning and follow-up of patients with CAP.
Resumo:
Background and objective: We aimed to identify the frequency of, reasons for and risk factors associated with additional healthcare visits and rehospitalizations (healthcare interactions) by patients with community-acquired pneumonia (CAP) within 30 days of hospital discharge. Methods: Observational analysis of a prospective cohort of adults hospitalized with CAP at a tertiary hospital (2007-2009). Additional healthcare interactions were defined as the visits to a primary care centre or emergency department and hospital readmissions within 30 days of discharge. Results: Of the 934 hospitalized patients with CAP, 282 (34.1%) had additional healthcare interactions within 30 days of hospital discharge: 149 (52.8%) needed an additional visit to their primary care centre and 177 (62.8%) attended the emergency department. Seventy-two (25.5%) patients were readmitted to hospital. The main reasons for additional healthcare interactions were worsening of signs or symptoms of CAP and new or worsening comorbid conditions independent of pneumonia, mainly cardiovascular and pulmonary diseases. The only independent factor associated with visits to primary care centre or emergency department was alcohol abuse (odds ratio [OR] = 1.65; 95% confidence interval [CI]: 1.03-2.64). Prior hospitalization (≤ 90 days) (OR = 2.47; 95% CI: 1.11-5.52) and comorbidities (OR = 3.99; 95% CI: 1.12-14.23) were independently associated with rehospitalization. Conclusions: Additional healthcare visits and rehospitalizations within 30 days of hospital discharge are common in patients with CAP. This is mainly due to a worsening of signs or symptoms of CAP and/or comorbid conditions. These findings may have implications for discharge planning and follow-up of patients with CAP.
Resumo:
Background and objective: We aimed to identify the frequency of, reasons for and risk factors associated with additional healthcare visits and rehospitalizations (healthcare interactions) by patients with community-acquired pneumonia (CAP) within 30 days of hospital discharge. Methods: Observational analysis of a prospective cohort of adults hospitalized with CAP at a tertiary hospital (2007-2009). Additional healthcare interactions were defined as the visits to a primary care centre or emergency department and hospital readmissions within 30 days of discharge. Results: Of the 934 hospitalized patients with CAP, 282 (34.1%) had additional healthcare interactions within 30 days of hospital discharge: 149 (52.8%) needed an additional visit to their primary care centre and 177 (62.8%) attended the emergency department. Seventy-two (25.5%) patients were readmitted to hospital. The main reasons for additional healthcare interactions were worsening of signs or symptoms of CAP and new or worsening comorbid conditions independent of pneumonia, mainly cardiovascular and pulmonary diseases. The only independent factor associated with visits to primary care centre or emergency department was alcohol abuse (odds ratio [OR] = 1.65; 95% confidence interval [CI]: 1.03-2.64). Prior hospitalization (≤ 90 days) (OR = 2.47; 95% CI: 1.11-5.52) and comorbidities (OR = 3.99; 95% CI: 1.12-14.23) were independently associated with rehospitalization. Conclusions: Additional healthcare visits and rehospitalizations within 30 days of hospital discharge are common in patients with CAP. This is mainly due to a worsening of signs or symptoms of CAP and/or comorbid conditions. These findings may have implications for discharge planning and follow-up of patients with CAP.
Resumo:
Spherical carbon coated iron particles of nanometric diameter in the 5-10 nm range have been produced by arc discharge at near-atmospheric pressure conditions (using 5-8·10 4 Pa of He). The particles exhibit a crystalline dense iron core with an average diameter 7.4 ± 2.0 nm surrounded by a sealed carbon shell, shown by transmission electron microscopy (TEM), selected-area diffrac- tion (SAED), energy-dispersive X-ray analysis (STEM-EDX) and electron energy loss spectroscopy (EELS). The SAED, EDX and EELS results indicate a lack of traces of core oxidized phases showing an efficient protection role of the carbon shell. The magnetic properties of the nanoparticles have been investigated in the 5-300 K temperature range using a superconducting quantum interference device (SQUID). The results reveal a superparamagnetic behaviour with an average monodomain diameter of 7.6 nm of the nanoparticles. The zero field cooled and field cooled (ZFC-FC)magnetization curves show a blocking temperature (TB)at room temperature very suitable for biomedical applications (drug delivery, magnetic resonance imaging-MRI-, hyperthermia).