Aging behavior in Cu-Al-Be shape memory alloy

This article reports positron annihilation spectroscopy and calorimetric measurements of the aging behavior in a Cu¿Al¿Be shape memory alloy. An excess of single vacancies is retained in the alloy as a result of a quench. All vacancies in excess disappear after long aging time, and a migration energy EM = 1.0±0.1 eV for this process has been found to be larger than in other Cu-based shape memory alloys. The good correlation found for the concentration of vacancies and the shift in the martensitic transition temperature demonstrates that, in Cu¿Al¿Be, changes in the transition after a quench are deeply related to the excess of vacancies.

La mineralització kàrstica (Ba,Cu,Pb,Zn,Sb) de Rocabruna i de Can Pubill, Pirineo Oriental: geologia, morfologia i gènesi

La mineralització consisteix en el rebliment de cavitats mètriques de morfologia kàrstica, encaixades en dolomies Cambro-Ordovicianes. Les cavitats són plenes de baritina amb una aurèola centi a mil·limètrica de quars i sulfurs (tetraedrita-tennantita, calcopirita, galena, esfalerita). La mineralització és situada a prop i per sota d'una paleosuperficie sobre la qual es depositaren els red-beds, amb disseminacions de baritina, de fàcies garumniana (Cretaci superior-Paleocè). Les condicions de deposició son coherents amb una precipitació a partir de solucions, inicialment àcides, que omplien cavitats preexistents.

Magnetoelasticity and magnetoresistance in Cu-Al-Mn shape-memory alloys

We study the effect of a magnetic field on the martensitic transition of a Cu-Al-Mn shape-memory alloy. The martensitic transition has been studied through resistance measurements under applied magnetic fields ranging from 0 to 50 kOe. Negative magnetoresistance showing an almost linear dependence with the square of the magnetization has been observed. This magnetoresistive effect is associated with the existence of small ferromagnetic Mn-clusters. Its strength and thermal dependence is different in both phases. The martensitic transition temperature is slightly increased and its spread in temperature significantly reduced upon increasing the field. These results show the existence of magnetoelastic coupling, which favors the nucleation of those martensitic variants with the easy magnetization axis aligned with the field.

Magnetoelasticity and magnetoresistance in Cu-Al-Mn shape-memory alloys

We study the effect of a magnetic field on the martensitic transition of a Cu-Al-Mn shape-memory alloy. The martensitic transition has been studied through resistance measurements under applied magnetic fields ranging from 0 to 50 kOe. Negative magnetoresistance showing an almost linear dependence with the square of the magnetization has been observed. This magnetoresistive effect is associated with the existence of small ferromagnetic Mn-clusters. Its strength and thermal dependence is different in both phases. The martensitic transition temperature is slightly increased and its spread in temperature significantly reduced upon increasing the field. These results show the existence of magnetoelastic coupling, which favors the nucleation of those martensitic variants with the easy magnetization axis aligned with the field.

Mineralización estratiforme de Pb-Zn-Cu en el Paleozoico de Bassegoda (Pirineo Oriental)

Al Sur del pico de Bassegoda existe una mineralización estratiforme de galena, esfalerita y pirita con calcopirita y arsenopirita, en forma de diseminaciones y lentejones masivos, situadas dentro de un tramo de 10 metros de micaesquistos y dolomias negras. Estos niveles mineralizados se hallan en el contacto entre micaesquistos y dolomias masivas que contienen piroclastos cidos. Tanto el tipo de depósito como la litologia encajante, permiten correlacionar esta mineralización con un conjunto de concentraciones metalicas estratiformes y estratoligadas del Cambro-Ordovicico del NE de Cataluña.

Comparativa de equipos de síntesis mecánica : aleaciones de base Al-Cu y Fe-Ni

La síntesis mecánica es un proceso basado en la molturación de una mezcla de polvosometida a altas energías que se producen por los choques entre las partículas y lasbolas de un micromolino, entre las partículas y las paredes del recipiente y entre lasmismas partículas. Los dos procesos involucrados en el proceso de síntesis mecánicason la soldadura en frío y la fractura.El proyecto que se presenta es una continuación de los diferentes estudios realizadosen el departamento de Recerca de Materials i Termodinàmica de la Universidad deGirona sobre el proceso de aleado mecánico, en especial del proyecto de Ivan Darnés(Abril 2005) donde se realizaba un estudio comparativo de los micromolinosPulverisette 7 (P7) y SPEX8000 a partir de dos aleaciones en polvo de base Fe.El presente proyecto tiene como objetivo principal realizar nuevamente unacomparación de los equipos P7 y SPEX8000, pero utilizando otras mezclas de polvoiniciales y modificando los parámetros del proceso. Para tal comparación se estudiaránlas muestras obtenidas a nivel estructural, térmico y morfológico

Caracterització de les metal·lotioneïnes CnMT1 i CnMT2 del fong Cryptococcus neoformans. Estudi de la capacitat coordinant davant dels ions Zn(II), Cd(II) i Cu(I)

En aquest treball de recerca, s’han estudiat les dues isoformes de metal·lotioneïna CnMT1 i CnMT2 presents en el fong patogen Cryptococcus neoformans. Recentment s’ha descobert que aquest fong té com a factor de virulència, els nivells de coure del medi on es troba. Les dues isoformes produïdes en medis rics en Zn(II) s’han utilitzat per a fer valoracions amb Cu(I) i Cd(II), i s’ha seguit l’evolució dels experiments mitjançant les tècniques DC, UV-vis, i ESI-MS. S’ha pogut observar que les dues isoformes tenen preferència per enllaçar Cu(I). Per altra banda també s’ha establert una gran homologia entre les dues seqüències.

Elements traça en esfalerites i galenes del dipòsit de Cierco (Pb-Zn). Alta Ribagorça, Pirineu Central

El diposit consisteix en dos filons E-W, tallats per un altre N-S. El rebliment filonia ès zonat amb esfalerita- galena-calcita als nivells profunds i galena-baritina als superiors. Els elements traça en esfalerites i galenes, plenament separades, han estat analitzats mitjancant fluorescència de raigs X. Els resultats mostren que l'esfalerita concentra la majoria d'elements traça, preferentment Fe, Co, Cd, Sn, Sb, Ga, Cu, Ge i Ag, amb una bona correlació entre els sis primers. La galena concentra únicament Sb, Ag i As, amb bona correlació entre els dos primers. Els continguts en elements traça estan homogèniament distribuits en tot el diposit.

High-pressure ultrasonic study of vibrational anharmonicity in bcc Cu-Al-Be alloys

To quantify the vibrational anharmonicity of the long-wavelength acoustic modes of bcc Cu74.1Al23.1Be2.8 near its martensitic transition temperature Ms (261 K), the hydrostatic pressure derivatives (¿CIJ/¿P)P=0 of the elastic stiffness moduli have been measured. The Grüneisen parameters at 268 K (just above Ms), especially of longitudinal modes, which become smaller than those of the shear modes, are quite different from those at 295 K: the anharmonicity changes markedly in the vicinity of the transition. Similar trends are noted for Cu66.5Al12.7Zn20.8. Experimental data near Ms are used to estimate cubic invariants in the strain order parameters in a Landau formalism.

Elastic constants of bcc Cu-Al-Ni alloys

We have measured the adiabatic elastic constants of two Cu-Al-Ni martensitic alloys using ultrasonic methods and we have compared the results to recent neutron-scattering experiments. It is shown that the elastic behavior of Cu-Al-Ni alloys follows the same trends exhibited by other Cu-based alloys; in particular, the TA2 long-wavelength acoustic modes are softer than all other modes.

Third order elastic constants of bcc Cu-Al-Ni

We have measured the changes in the ultrasonic wave velocity, induced by the application of uniaxial stresses in a Cu-Al-Ni single crystal. From these measurements, the complete set of third-order elastic constants has been obtained. The comparison of results for Cu-Al-Ni with available data for other Cu-based alloys has shown that all these alloys exhibit similar anharmonic behavior. By using the measured elastic constants in a Landau expansion for elastic phase transitions, we have been able to give an estimation of the value of a fourth-order elastic constants combination. The experiments have also shown that the application of a stress in the [001] direction, reduces the material resistance to a (110)[110] shear and thus favors the martensitic transition.

On the stability of the bcc phase in Cu-Al-Mn shape memory alloys

Measurements of the entropy change at the martensitic transition of two composition-related sets of Cu-Al-Mn shape-memory alloys are reported. It is found that most of the entropy change has a vibrational origin, and depends only on the particular close-packed structure of the low-temperature phase. Using data from the literature for other Cu-based alloys, this result is shown to be general. In addition, it is shown that the martensitic structure changes from 18R to 2H when the ratio of conduction electrons per atom reaches the same value as the eutectoid point in the equilibrium phase diagram. This finding indicates that the structure of the metastable low-temperature phase is reminiscent of the equilibrium structure.