The Voting Practice of the Fifteen in the UN General Assembly: Convergence and Divergence

The EU has, since the early days of the Community, had the ambition to speak with ‘a single voice’ in international fora, in particular in the United Nations’ General Assembly. This aspiration, which has become more pronounced since the inauguration of the CFSP, has not always been easy to achieve due to domestic or international level factors affecting the EU member states. However, in the last decade there has been a dramatic increase in convergence in the Fifteen’s voting record. This paper contemplates the underlying reasons for such a convergence

The suitability of steam exploded vitis vinifera and alkaline lignin for the manufacture of fiberboard

The main objective of this study was to explore the suitability of Vitis vinifera as a raw material and alkaline lignin as a natural binder for fiberboard manufacturing. In the first step, Vitis vinifera was steam- exploded through a thermo-mechanical vapor process in a batch reactor, and the obtained pulp was dried, ground, and pressed to produce the boards. The effects of pretreatment factors and pressing conditions on the chemical composition of the fibers and the physico-mechanical properties of binderless fiberboards were evaluated, and the conditions that optimize these properties were found. A response surface method based on a central composite design and multiple-response optimization was used. The variables studied and their respective variation ranges were: pretreatment temperature (Tr: 190-210ºC), pretreatment time (tr: 5-10 min), pressing temperature (Tp: 190-210ºC), pressing pressure (Pp: 8-16MPa), and pressing time (tp: 3-7min). The results of the optimization step show that binderless fiberboards have good water resistance and weaker mechanical properties. In the second step, fiberboards based on alkaline lignin and Vitis vinifera pulp produced at the optimal conditions determined for binderless fiberboards were prepared and their physico-mechanical properties were tested. Our results show that the addition of about 15% alkaline lignin leads to the production of fiberboards that fully meet the requirements of the relevant standard specifications

Antimicrobial peptide genes in Bacillus strains from plant environments

The presence of the antimicrobial peptide (AMP) biosynthetic genes srfAA (surfactin), bacA (bacylisin), fenD (fengycin), bmyB (bacyllomicin), spaS (subtilin), and ituC (iturin) was examined in 184 isolates of Bacillus spp. obtained from plant environments (aerial, rhizosphere, soil) in the Mediterranean land area of Spain. Most strains had between two and four AMP genes whereas strains with five genes were seldom detected and none of the strains had six genes. The most frequent AMP gene markers were srfAA, bacA, bmyB, and fenD, and the most frequent genotypes srfAA-bacA-bmyB and srfAAbacA-bmyB-fenD. The dominance of these particular genes in Bacillus strains associated with plants reinforces the competitive role of surfactin, bacyllomicin, fengycin, and bacilysin in the fitness of strains in natural environments. The use of these AMP gene markers may assist in the selection of putative biological control agents of plant pathogens

Evaluation of four whole-plant inoculation methods to analyze the pathogenicity of Erwinia amylovora under quarantine conditions

Four methods were tested to assess the fire-blight disease response on grafted pear plants. The leaves of the plants were inoculated with Erwinia amylovora suspensions by pricking with clamps, cutting with scissors, local infiltration, and painting a bacterial suspension onto the leaves with a paintbrush. The effects of the inoculation methods were studied in dose-time-response experiments carried out in climate chambers under quarantine conditions. A modified Gompertz model was used to analyze the disease-time relatiobbnships and provided information on the rate of infection progression (rg) and time delay to the start of symptoms (t0). The disease-pathogen-dose relationships were analyzed according to a hyperbolic saturation model in which the median effective dose (ED50) of the pathogen and maximum disease level (ymax) were determined. Localized infiltration into the leaf mesophile resulted in the early (short t0) but slow (low rg) development of infection whereas in leaves pricked with clamps disease symptoms developed late (long t0) but rapidly (high rg). Paintbrush inoculation of the plants resulted in an incubation period of medium length, a moderate rate of infection progression, and low ymax values. In leaves inoculated with scissors, fire-blight symptoms developed early (short t0) and rapidly (high rg), and with the lowest ED50 and the highest ymax

The wage effect of an indexation clause: Evidence from Spanish manufacturing firms

An endogenous switching model of ex-ante wage changes under indexed and non-indexed settlements is estimated for the Spanish manufacturing sector using collective bargaining firm data for the 1984-1991 period. The likelihood of indexing the settlement is higher for nationwide unions than for other union groups within the works council and increases with the expected level of inflation. For wage change equations, a common structure for indexed and non-indexed settlements is strongly rejected, showing a source of nominal rigidity. For indexed contracts, the expected ex-ante total inflation coverage is nearly complete. It is also shown that workers pay a significant ex-ante wage change premium (differential) to obtain a cost of living allowance clause. However, the realised contingent compensation exceeds such a premium for all industries. Finally, important spillover effects in wage setting and the decision to index the settlement have been detected.

Complementarity between technology make and buy in innovation strategies: Evidence from Belgiam manufacturing firms

This paper characterizes the innovation strategy of manufacturing firms andexamines the relation between the innovation strategy and importantindustry-, firm- and innovation-specific characteristics using Belgiandata from the Eurostat Community Innovation Survey. In addition to importantsize effects explaining innovation, we find that high perceived risks andcosts and low appropriability of innovations do not discourage innovation,but rather determine how the innovation sourcing strategy is chosen. Withrespect to the determinants of the decision of the innovative firm toproduce technology itself (Make) or to source technology externally (Buy),we find that small firms are more likely restrict their innovation strategyto an exclusive make or buy strategy, while large firms are more likely tocombine both internal and external knowledge acquisition in their innovationstrategy. An interesting result that highlights the complementary nature ofthe Make and Buy decisions, is that, controlled for firm size, companies forwhich internal information is an important source for innovation are morelikely to combine internal and external sources of technology. We find thisto be evidence of the fact that in-house R&D generates the necessaryabsorptive capacity to profit from external knowledge acquisition. Also theeffectiveness of different mechanisms to appropriate the benefits ofinnovations and the internal organizational resistance against change areimportant determinants of the firm's technology sourcing strategy.

Plant-associated microorganisms: a view from the scope of microbiology

Microorganisms interact with plants because plants offer a wide diversity of habitats including the phyllosphere (aerial plant part), the rhizosphere (zone of influence of the root system), and the endosphere (internal transport system). Interactions of epiphytes, rhizophytes or endophytes may be detrimental or beneficial for either the microorganism or the plant and may be classified as neutralism, commensalism, synergism, mutualism, amensalism, competition or parasitism

Pathogenic plant-microbe interactions. What we know and how we benefit

Plants, like humans and other animals, also get sick, exhibit disease symptoms, and die. Plant diseases are caused by environmental stress, genetic or physiological disorders and infectious agents including viroids, viruses, bacteria and fungi. Plant pathology originated from the convergence of microbiology, botany and agronomy; its ultimate goal is the control of plant disease. Microbiologists have been attracted to this field of research because of the need for identification of the agents causing infectious diseases in economically important crops. In 1878—only two years after Pasteur and Koch had shown for the first time that anthrax in animals was caused by a bacteria—Burril, in the USA, discovered that the fire blight disease of apple and pear was also caused by a bacterium (nowadays known as Erwinia amylovora). In 1898, Beijerinck concluded that tobacco mosaic was caused by a “contagium vivum fluidum” which he called a virus. In 1971, Diener proved that a potato disease named potato spindle tuber was caused by infectious RNA which he called viroid

Automatització d'una planta de processos químics

Resum L’any 1969 es van començar a comercialitzar els sistemes digitals programables coneguts com autòmats programables o PLC’s, utilitzats per controlar qualsevol tipus de procés industrial. Al llarg de tots aquests anys, aquests sistemes i tota la tecnologia en general han evolucionat molt, i només és qüestió de temps que la tecnologia que utilitzem avui en dia quedi obsoleta i substituïda per una de millors característiques i amb més avantatges. Aquest és el motiu de l’elaboració d’aquest treball, que com a objectiu pretén modernitzar un procés de fabricació d’una industria química que ha quedat molt limitat a causa de l’antiguitat de la instal•lació. Per dur a terme aquesta modernització, s’introdueixen sistemes de control amb majors prestacions, s’utilitzen xarxes de comunicacions per facilitar el muntatge elèctric de la instal•lació i un sistema de supervisió i adquisició de dades per poder obtenir un control més estricte del procés de fabricació i de tots els factors que intervenen. El funcionament del procés de fabricació és que a partir d’unes matèries primeres líquides emmagatzemades en dipòsits, es dosifiquin aquestes matèries en l’ordre i la quantitat desitjada dins un o diversos recipients per barrejar-les i aplicar els tractaments que siguin necessaris. Tot aquest procés està controlat per un autòmat programable, i disposa de diferents terminals operadors per poder interactuar amb el sistema. També té implementat un sistema SCADA en diversos ordinadors per aportar una visió general de la planta en temps real, un registre de dades dels paràmetres que es controlen i alhora serveix per enllaçar amb la xarxa d’ordinadors existent. Com annex d’aquest treball, es presenten els esquemes elèctrics i el programa de l’autòmat programable per veure totes les característiques elèctriques dels dispositius i el mètode de funcionament del procés. S’ha aconseguit donar un salt tecnològic i poder gaudir de tots els avantatges que ofereixen les noves tecnologies, que com a resultat s’ha optimitzat i millorat el procés de fabricació. De totes les conclusions, la més destacada és la d’haver dissenyat un sistema de control basat en una estructura descentralitzada molt flexible, que es pot expandir i adaptar fàcilment als possibles canvis.

Assembly and disassembly of the Golgi Complex: two prodesses arranged in a cis to trans direction

We have studied the disassembly and assembly of two morphologically and functionally distinct parts of the Golgi complex, the cis/middle and trans cisterna/trans network compartments. For this purpose we have followed the redistribution of three cis/middle- (GMPc-1, GMPc-2, MG 160) and two trans- (GMPt-1 and GMPt-2) Golgi membrane proteins during and after treatment of normal rat kidney (NRK) cells with brefeldin A (BFA). BFA induced complete disassembly of the cis/middle- and trans-Golgi complex and translocation of GMPc and GMPt to the ER. Cells treated for short times (3 min) with BFA showed extensive disorganization of both cis/middle- and trans-Golgi complexes. However, complete disorganization of the trans part required much longer incubations with the drug. Upon removal of BFA the Golgi complex was reassembled by a process consisting of three steps: (a) exist of cis/middle proteins from the ER and their accumulation into vesicular structures scattered throughout the cytoplasm; (b) gradual relocation and accumulation of the trans proteins in the vesicles containing the cis/middle proteins; and (c) assembly of the cisternae, and reconstruction of the Golgi complex within an area located in the vicinity of the centrosome from which the ER was excluded. Reconstruction of the cis/middle-Golgi complex occurred under temperature conditions inhibitory of the reorganization of the trans-Golgi complex, and was dependent on microtubules. Reconstruction of the trans-Golgi complex, disrupted with nocodazole after selective fusion of the cis/middle-Golgi complex with the ER, occurred after the release of cis/middle-Golgi proteins from the ER and the assembly of the cis/middle cisternae.

Cholesterol transport from late endosomes to the Golgi regulates t-SNARE trafficking, assembly, and function

Cholesterol regulates plasma membrane (PM) association and functioning of syntaxin-4 and soluble N-ethylmaleimide-sensitive fusion protein 23 (SNAP23) in the secretory pathway. However, the molecular mechanism and cellular cholesterol pools that determine the localization and assembly of these target membrane SNAP receptors (t-SNAREs) are largely unknown. We recently demonstrated that high levels of annexin A6 (AnxA6) induce accumulation of cholesterol in late endosomes, thereby reducing cholesterol in the Golgi and PM. This leads to an impaired supply of cholesterol needed for cytosolic phospholipase A2 (cPLA2) to drive Golgi vesiculation and caveolin transport to the cell surface. Using AnxA6-overexpressing cells as a model for cellular cholesterol imbalance, we identify impaired cholesterol egress from late endosomes and diminution of Golgi cholesterol as correlating with the sequestration of SNAP23/syntaxin-4 in Golgi membranes. Pharmacological accumulation of late endosomal cholesterol and cPLA2 inhibition induces a similar phenotype in control cells with low AnxA6 levels. Ectopic expression of Niemann-Pick C1 (NPC1) or exogenous cholesterol restores the location of SNAP23 and syntaxin-4 within the PM. Importantly, AnxA6-mediated mislocalization of these t-SNAREs correlates with reduced secretion of cargo via the SNAP23/syntaxin-4¿dependent constitutive exocytic pathway. We thus conclude that inhibition of late endosomal export and Golgi cholesterol depletion modulate t-SNARE localization and functioning along the exocytic pathway.

Clathrin Assembly Lymphoid Myeloid Leukemia (CALM) Protein: Localization in Endocytic-coated Pits, Interactions with Clathrin, and the Impact of Overexpression on Clathrin-mediated Traffic

The clathrin assembly lymphoid myeloid leukemia (CALM) gene encodes a putative homologue of the clathrin assembly synaptic protein AP180. Hence the biochemical properties, the subcellular localization, and the role in endocytosis of a CALM protein were studied. In vitro binding and coimmunoprecipitation demonstrated that the clathrin heavy chain is the major binding partner of CALM. The bulk of cellular CALM was associated with the membrane fractions of the cell and localized to clathrin-coated areas of the plasma membrane. In the membrane fraction, CALM was present at near stoichiometric amounts relative to clathrin. To perform structure-function analysis of CALM, we engineered chimeric fusion proteins of CALM and its fragments with the green fluorescent protein (GFP). GFP-CALM was targeted to the plasma membrane-coated pits and also found colocalized with clathrin in the Golgi area. High levels of expression of GFP-CALM or its fragments with clathrin-binding activity inhibited the endocytosis of transferrin and epidermal growth factor receptors and altered the steady-state distribution of the mannose-6-phosphate receptor in the cell. In addition, GFP-CALM overexpression caused the loss of clathrin accumulation in the trans-Golgi network area, whereas the localization of the clathrin adaptor protein complex 1 in the trans-Golgi network remained unaffected. The ability of the GFP-tagged fragments of CALM to affect clathrin-mediated processes correlated with the targeting of the fragments to clathrin-coated areas and their clathrin-binding capacities. Clathrin-CALM interaction seems to be regulated by multiple contact interfaces. The C-terminal part of CALM binds clathrin heavy chain, although the full-length protein exhibited maximal ability for interaction. Altogether, the data suggest that CALM is an important component of coated pit internalization machinery, possibly involved in the regulation of clathrin recruitment to the membrane and/or the formation of the coated pit.

Public infrastructure and the performance of manufacturing industries: short-and long-run

We present a theoretical framework for determining the short- and long-run effects of infrastructure. While the short-run effects have been the focus of most previous studies, here we derive long-run elasticities by taking into account the adjustment of quasi-fixed inputs to their optimum levels. By considering the impact of infrastructure on private investment decisions, we observe how, apart from the direct effect on costs in the short-run, infrastructure exerts an indirect source of influence in the long-run through their effect on private capital. The model is applied to manufacturing industries in the Spanish regions

Public infrastructure and the performance of manufacturing industries: short-and long-run

We present a theoretical framework for determining the short- and long-run effects of infrastructure. While the short-run effects have been the focus of most previous studies, here we derive long-run elasticities by taking into account the adjustment of quasi-fixed inputs to their optimum levels. By considering the impact of infrastructure on private investment decisions, we observe how, apart from the direct effect on costs in the short-run, infrastructure exerts an indirect source of influence in the long-run through their effect on private capital. The model is applied to manufacturing industries in the Spanish regions