Dynamic compact thermal models with multiple power sources: application to an ultrathin chip stacking technology

Whereas numerical modeling using finite-element methods (FEM) can provide transient temperature distribution in the component with enough accuracy, it is of the most importance the development of compact dynamic thermal models that can be used for electrothermal simulation. While in most cases single power sources are considered, here we focus on the simultaneous presence of multiple sources. The thermal model will be in the form of a thermal impedance matrix containing the thermal impedance transfer functions between two arbitrary ports. Eachindividual transfer function element ( ) is obtained from the analysis of the thermal temperature transient at node ¿ ¿ after a power step at node ¿ .¿ Different options for multiexponential transient analysis are detailed and compared. Among the options explored, small thermal models can be obtained by constrained nonlinear least squares (NLSQ) methods if the order is selected properly using validation signals. The methods are applied to the extraction of dynamic compact thermal models for a new ultrathin chip stack technology (UTCS).

A time-domain method for the analysis of thermal impedance response preserving the convolution form

The study of the thermal behavior of complex packages as multichip modules (MCM¿s) is usually carried out by measuring the so-called thermal impedance response, that is: the transient temperature after a power step. From the analysis of this signal, the thermal frequency response can be estimated, and consequently, compact thermal models may be extracted. We present a method to obtain an estimate of the time constant distribution underlying the observed transient. The method is based on an iterative deconvolution that produces an approximation to the time constant spectrum while preserving a convenient convolution form. This method is applied to the obtained thermal response of a microstructure as analyzed by finite element method as well as to the measured thermal response of a transistor array integrated circuit (IC) in a SMD package.

Citizens' control and the efficiency of local public services

Està àmpliament acceptat que la descentralització fiscal incrementa el control dels ciutadans sobre els polítics, fomenta el rendiment de comptes i augmenta l¿eficiència. Aquest treball té per objectiu identificar les característiques socio-econòmiques dels ciutadans (votants potencials) que generen un major control sobre els responsables polítics locals provocant, així, un major nivell d'eficiència en un context descentralitzat.També s'analitzen les característiques fiscals dels governs locals que fomenten aquest control i eficiència. L'estudi s'ha aplicat a una mostra de municipis catalans seguint la metodologia convencional basada en l'estimació en dues etapes. A la primera etapa s'estima l'eficiència en que operen els municipis mitjançant la tècnica DEA. La novetat rau en el càlcul d'una nova versió d'indicador global d¿output municipal. En la segona etapa, a través d¿una estimació tipus Tobit (models censurats) i de mètodes bootstrap, es mostra com els factors abans comentats poden influir sobre l¿eficiència. Els resultats suggereixen que la forta presencia de comerciants, jubilats i persones amb dret a vot afavoreixen el control dels ciutadans, el rendiment de comptes i l¿eficiència. Un factor que facilita aquest control, i per tant una major eficiència, és la presència de baixos costos d'oportunitat d'obtenir informació sobre la gestió local dels serveis públics.

Fossil resource depletion and climate change emissions: the role of physical constrictions

[spa] En lo que concierne al cambio climático, los pronósticos de cercanos picos de combustible fósiles parecen buenas noticias pues la mayoría de las emisiones proceden de la quema de combustibles fósiles. Sin embargo, esto podría resultar engañoso de confirmarse las enormes estimaciones de reservas de carbón pues puede divisarse un intercambio de combustible fósiles con baja concentración de carbono (petróleo y gas) por otros de mayor (carbón). Ciñéndonos a esta hipótesis desarrollamos escenarios donde tan pronto el petróleo y el gas natural alcanzan su cénit la extracción de carbón crece lo necesario para compensar el descenso de los primeros. Estimamos las emisiones que se deriva de tales supuestos y las comparamos con el peor escenario del IPCC. Si bien dicho escenario parece improbable concluimos que los picos de petróleo y gas no son suficientes para evitar peligrosas sendas de gases de efecto invernadero. Las concentraciones de CO2 halladas superan con creces las 450 ppm sin signos de remisión.

Embodied pollution in Spanish household consumption: a disaggregate analysis

[spa] En este artículo aplicamos un modelo input-output ampliado medioambientalmente para analizar un aspecto específico de la hipótesis de la curva de Kuznets ambiental. El propósito del estudio es analizar si las estructuras de consumo de los hogares con una mejor ‘posición económica’ pueden tener un efecto positivo para reducir las presiones medioambientales. Para ello combinamos información de diferentes bases de datos para analizar el impacto de la contaminación atmosférica del consumo de diferentes hogares españoles en el año 2000. Consideramos nueve gases, i.e. los seis gases de efecto invernadero (CO2, CH4, N2O, SF6, HFCs, y PFCs) y otros tres gases (SO2, NOx, y NH3). Clasificamos los hogares en quintiles de gasto per capita y quintiles de gasto equivalente. Los resultados obtenidos muestran que hay una relación positiva y elevada entre el nivel de gasto y las emisiones directas e indirectas generadas por el consumo de los hogares; sin embargo, las intensidades de emisión tienden a disminuir con el nivel de gasto para los diferentes gases, con la excepción de SF6, HFCs, y PFCs.

Measuring the efficiency in Spanish municipal refuse collection services

The objective of this study is to analyse the technical or productive efficiency ofthe refuse collection services in 75 municipalities located in the Spanish regionof Catalonia. The analysis has been carried out using various techniques. Firstly we have calculated a deterministic parametric frontier, then a stochastic parametric frontier, and finally, various non-parametric approaches (DEA and FDH). Concerning the results, these naturally differ according to the technique used to approach the frontier. Nevertheless, they have an appearance of solidity, at least with regard to the ordinal concordance among the indices of efficiency obtained by the different approaches, as is demonstrated by the statistical tests used. Finally, we have attempted to search for any relation existing between efficiency and the method (public or private) of managing the services. No significant relation was found between the type of management and efficiencyindices

SIMSAFADIM-CLASTIC: A new approach to mathematical 3D forward simulation modelling for terrigenous and carbonate marine sedimentation

Most sedimentary modelling programs developed in recent years focus on either terrigenous or carbonate marine sedimentation. Nevertheless, only a few programs have attempted to consider mixed terrigenous-carbonate sedimentation, and most of these are two-dimensional, which is a major restriction since geological processes take place in 3D. This paper presents the basic concepts of a new 3D mathematical forward simulation model for clastic sediments, which was developed from SIMSAFADIM, a previous 3D carbonate sedimentation model. The new extended model, SIMSAFADIM-CLASTIC, simulates processes of autochthonous marine carbonate production and accumulation, together with clastic transport and sedimentation in three dimensions of both carbonate and terrigenous sediments. Other models and modelling strategies may also provide realistic and efficient tools for prediction of stratigraphic architecture and facies distribution of sedimentary deposits. However, SIMSAFADIM-CLASTIC becomes an innovative model that attempts to simulate different sediment types using a process-based approach, therefore being a useful tool for 3D prediction of stratigraphic architecture and facies distribution in sedimentary basins. This model is applied to the neogene Vallès-Penedès half-graben (western Mediterranean, NE Spain) to show the capacity of the program when applied to a realistic geologic situation involving interactions between terrigenous clastics and carbonate sediments.

Contexto estructural y paleogeográfico de los sistemas lacustres cenozoicos de España.

La evolución de los sistemas lacustres cenozoicos en España estuvo claramente influida por: l) la edificación de los orógenos pirenaico y bético y la intensa deformación interna que afectó la microplaca de Iberia. 2) l0s cambios de las condiciones paleogeogrlficas y paleoclimáticas generales que afectaron la región mediterránea occidental-atlántica oriental en la que se localizaba Iberia. Potentes sucesiones de carbonatos y evaporitas lacustres han sido reconocidas en la mayor parte de las cuencas cenozoicas españolas. Junto a estos depósitos se registra la presencia de otros menos frecuentes (carbón, devósitos bituminosos, diatomitas, arcillas especiales) también significativos desde un punto de vista geolimnolÓgico e interesantes desde una perspectiva económica. Los mayores y mis persistentes sistemas lacustres se ubicaron en las cuencas de antepaís, arealmente muy extensas. Los de menor entidad y mis corta evolución se formaron en cuencas limitadas por fallas de distintos tipos. En ambos casos los sistemas lacustres evolucionaron en estrecharelacióncon sistemas aiuviales y sus características hidroquírnicas estuvieron muy influidas por el reciclaje de depósitos de carbonatos, sulfatos y cloruros, fundamentalmente de edad mesozoica. Este reciclaje influyó tanto en la litologia de las sucesiones lacustres resultantes como sobre las caracteristicas de las asociaciones de organismos limnicos que se desarrollaron en los sistemas lacustres.

Theoretical study of elastic electron scattering off stable and exotic nuclei

Results for elastic electron scattering by nuclei, calculated with charge densities of Skyrme forces and covariant effective Lagrangians that accurately describe nuclear ground states, are compared against experiment in stable isotopes. Dirac partial-wave calculations are performed with an adapted version of the ELSEPA package. Motivated by the fact that studies of electron scattering off exotic nuclei are intended in future facilities in the commissioned GSI and RIKEN upgrades, we survey the theoretical predictions from neutron-deficient to neutron-rich isotopes in the tin and calcium isotopic chains. The charge densities of a covariant interaction that describes the low-energy electromagnetic structure of the nucleon within the Lagrangian of the theory are used to this end. The study is restricted to medium- and heavy-mass nuclei because the charge densities are computed in mean-field approach. Because the experimental analysis of scattering data commonly involves parameterized charge densities, as a surrogate exercise for the yet unexplored exotic nuclei, we fit our calculated mean-field densities with Helm model distributions. This procedure turns out to be helpful to study the neutron-number variation of the scattering observables and allows us to identify correlations of potential interest among some of these observables within the isotopic chains.

Spin-2 gravitational trace anomaly

The part proportional to the Euler-Poincar characteristic of the contribution of spin-2 fields to the gravitational trace anomaly is computed. It is seen to be of the same sign as all the lower-spin contributions, making anomaly cancellation impossible. Subtleties related to Weyl invariance, gauge independence, ghosts, and counting of degrees of freedom are pointed out.

BRST-invariant path integral for a spinning relativistic particle

The propagator of a relativistic spinning particle is calculated using the Becchi-Rouet-Stora-Tyutin-(BRST)-invariant path-integral formalism of Fradkin and Vilkovisky. The spinless case is considered as an introduction to the formalism.

Spin-3/2 gravitational trace anomaly

It is argued that previous computations of the spin-(3/2 anomaly have spurious contributions, as there is Weyl-invariance breaking already at the classical level. The genuine, gauge-invariant, spin-(3/2 gravitational trace anomaly is computed here.