The Determinants of Entry are not Independent of Start-up Size: Some evidence from Spanish manufacturing

In this paper we explore the determinants of firm start-up size of Spanish manufacturing industries. The industries' barriers to entry affect the ability of potential entrants to enter the markets and the size range at which they decide to enter. In order to examine the relationships between barriers to entry and size we applied the quantile regression techniques. Our results indicate that the variables that characterize the structure of the market, the variables that are related to the behaviour of the incumbent firms and the rate of growth of the industries generate different barriers depending on the initial size of the entrants. Keywords: Entry, regression quantiles, start-up size. JEL classification: L110, L600

Who participates in R&D subsidy programs? The case of spanish manufacturing firms.

Empirical evidence on the effectiveness of R&D subsidies to firms has produced mixed results so far. One possible explanation is that firms and project selection rules may be quite heterogeneous both across agencies and across industries, leading to different outcomes in terms of the induced additional private effort. Here we focus on the participation stage. Using a sample of Spanish firms, we test for differences across agencies and industries. Our results suggest that firms in the same industry face different hurdles to participate in different agencies’ programs, that participation patterns may reflect a combination of agency goals, and that patterns differ across high-tech and low-tech industries.

New business formation and employment growth: some evidence for the Spanish manufacturing industry

This paper explores the effects of new business formation on employment growth in Spanish manufacturing industries. New firms are believed to make an important contribution to economic growth but the extent of this contribution is unclear. We consider time lags of new firm formation as explanatory variables of employment change and identify how long the effect of new firm entries on employment lasts. Our main results show that the effects of new business formation are positive in the short term, negative in the medium term and positive in the long term, thus confirming the existence of indirect supply-side effects found in similar studies for other countries. Key words: regional growth, firm entry, time lags and Spanish economy. JEL classifications: L00, L60, R11, R12

Technical innovations at the service of cheaper labour in pre-industrial Europe. The Enlightened agenda to transform the gender division of labour in silk manufacturing

In 1749, Jacques de Vaucanson patented his or tour pour tirer la soie or spindle for silk reeling. In that same year he presented his invention to the Academy of the Sciences in Paris, of which he was a member1. Jacques de Vaucanson was born in Grenoble, France, in 1709, and died in Paris in 1782. In 1741 he had been appointed inspector of silk manufactures by Louis XV. He set about reorganizing the silk industry in France, in considerable difficulty at the time due to foreign competition. Given Vaucanson’s position, his invention was intended to replace the traditional Piémontes method, and had an immediate impact upon the silk industry in France and all over Europe.

Increasing the scalability and the speedup of a fish school distributed simulator

El present treball fa un anàlisi i desenvolupament sobre les millores en la velocitat i en l’escalabilitat d'un simulador distribuït de grups de peixos. Aquests resultats s’han obtingut fent servir una nova estratègia de comunicació per als processos lògics (LPs) i canvis en l'algoritme de selecció de veïns que s'aplica a cadascun dels peixos en cada pas de simulació. L’idea proposada permet que cada procés lògic anticipi futures necessitats de dades pels seus veïns reduint el temps de comunicació al limitar la quantitat de missatges intercanviats entre els LPs. El nou algoritme de selecció dels veïns es va desenvolupar amb l'objectiu d'evitar treball innecessari permetent la disminució de les instruccions executades en cada pas de simulació i per cadascun del peixos simulats reduint de forma significativa el temps de simulació.

Productivity growth and competition in Spanish manufacturing firms: What has happened in recent years?

This paper addresses the issue of the relationship between productivity and market competition. In comparison to the economies of other European countries, the Spanish economy has been growing, while productivity growth has stagnated. Here we provide empirical evidence about the relationship between productivity and market competition from Spanish manufacturing firms at firm level between 1994 and 2004. Correcting for selection bias, our study pays special attention to the patterns of productivity growth between openness and non-openness firms. When market competition increases the effect on firms operating in domestic markets is positive but when the level of competition is high incentives to invest in innovation and productivity gains disappear. The empirical relationship between competition and productivity is an inverted U-shape, where productivity growth is highest at intermediate levels of competition. The productivity growth of firms operating in international markets is higher than that of non-openness firms, but when market competition rises they moderate their productivity growth. Our empirical results suggest that the correct competition policy in the Spanish economy should remove the barriers to competition in internal markets in order to increase the incentives for manufacturing firms to invest in innovation and productivity growth.

Cooperative strategies for imperfect CSI scenarios based on distributed Alamouti

Les comunicacions cooperatives estan guanyant un gran interès en les comunicacions modernes degut a que permeten millorar la transmissió dʼinformació entre un emissor i un receptor utilitzant una sèrie de terminals situats entre ells. Aquest projecte és un estudi complet del sistemes cooperatius, analitzant el seu rendiment i comparant lʼús dʼun sol dʼaquests terminals amb lʼús del codi Alamouti, que utilitza dos terminals. Primer hi ha una introducció als sistemes cooperatius i a la teoria de la informació. Després hem estudiat un sistema cooperatiu amb la teoria de la informació com a base, en termes de probabilitat de fallada del sistema, i posteriorment lʼhem adaptat a un sistema cooperatiu real utilitzant una modulació QPSK, estudiant la seva probabilitat dʼerror de paquet. Finalment es proposen diversos protocols que permeten millorar el rendiment del sistema cooperatiu estudiat.

A first attempt of geographically-distributed Multi-scale integrated analysis of societal and ecosystem metabolism (MuSIASEM): mapping human time and energy throughput in metropolitan Barcelona

This study presents a first attempt to extend the “Multi-scale integrated analysis of societal and ecosystem metabolism (MuSIASEM)” approach to a spatial dimension using GIS techniques in the Metropolitan area of Barcelona. We use a combination of census and commercial databases along with a detailed land cover map to create a layer of Common Geographic Units that we populate with the local values of human time spent in different activities according to MuSIASEM hierarchical typology. In this way, we mapped the hours of available human time, in regards to the working hours spent in different locations, putting in evidence the gradients in spatial density between the residential location of workers (generating the work supply) and the places where the working hours are actually taking place. We found a strong three-modal pattern of clumps of areas with different combinations of values of time spent on household activities and on paid work. We also measured and mapped spatial segregation between these two activities and put forward the conjecture that this segregation increases with higher energy throughput, as the size of the functional units must be able to cope with the flow of exosomatic energy. Finally, we discuss the effectiveness of the approach by comparing our geographic representation of exosomatic throughput to the one issued from conventional methods.

Semigroup analysis of structured populations with distributed states-at-birth arising in mathematical aquaculture

Motivated by the modelling of structured parasite populations in aquaculture we consider a class of physiologically structured population models, where individuals may be recruited into the population at different sizes in general. That is, we consider a size-structured population model with distributed states-at-birth. The mathematical model which describes the evolution of such a population is a first order nonlinear partial integro-differential equation of hyperbolic type. First, we use positive perturbation arguments and utilise results from the spectral theory of semigroups to establish conditions for the existence of a positive equilibrium solution of our model. Then we formulate conditions that guarantee that the linearised system is governed by a positive quasicontraction semigroup on the biologically relevant state space. We also show that the governing linear semigroup is eventually compact, hence growth properties of the semigroup are determined by the spectrum of its generator. In case of a separable fertility function we deduce a characteristic equation and investigate the stability of equilibrium solutions in the general case using positive perturbation arguments.

Predictive and distributed routing balancing (PR-DRB): high speed interconnection networks

Current parallel applications running on clusters require the use of an interconnection network to perform communications among all computing nodes available. Imbalance of communications can produce network congestion, reducing throughput and increasing latency, degrading the overall system performance. On the other hand, parallel applications running on these networks posses representative stages which allow their characterization, as well as repetitive behavior that can be identified on the basis of this characterization. This work presents the Predictive and Distributed Routing Balancing (PR-DRB), a new method developed to gradually control network congestion, based on paths expansion, traffic distribution and effective traffic load, in order to maintain low latency values. PR-DRB monitors messages latencies on intermediate routers, makes decisions about alternative paths and record communication pattern information encountered during congestion situation. Based on the concept of applications repetitiveness, best solution recorded are reapplied when saved communication pattern re-appears. Traffic congestion experiments were conducted in order to evaluate the performance of the method, and improvements were observed.

Mechanisms of agglomeration: Evidence from the location of new manufacturing firms in Spain

El objetivo de esta investigación es aportar evidencia sobre las fuentes de las economías de aglomeración para el caso español. De todas las maneras posibles que se han tomado en la literatura para medir las economías de aglomeración, nosotros lo analizamos a partir de las decisiones de localización de las empresas manufactureras. La literatura reciente ha puesto de relieve que el análisis basado en la disyuntiva localización / urbanización (relaciones dentro de un mismo sector) no es suficiente para entender las economías de aglomeración. Sin embargo, las relaciones entre los diferentes sectores sí resultan significativas al examinar por qué las empresas que pertenecen a diferentes sectores se localizan unas al lado de las otras. Con esto en mente, intentamos explicar que relaciones entre diferentes sectores pueden explicar coaglomeración. Para ello, nos centramos en aquellas relaciones entre sectores definidos a partir de los mecanismos de aglomeración de Marshall, es decir, labor market, input sharing y knowledge spillovers. Trabajamos con el labor market pooling en la medida en que los dos sectores utilizan los mismos trabajadores (clasificación de ocupaciones). Con el segundo mecanismo de Marshall, input sharing, introducimos cómo dos sectores tienen una relación de comprador / vendedor. Por último, nos referimos a dos sectores que utilizan las mismas tecnologías en cuanto a los knowledge spillovers. Con el fin de capturar todos los efectos de los mecanismos de aglomeracion en España, en esta investigación trabajamos con dos ámbitos geográficos, los municipios y los mercados de trabajo locales. La literatura existente nunca se ha puesto de acuerdo en cual es el ámbito geográfico en el que mejor trabajan los mecanismos Marshall, por lo que hemos cubierto todas las unidades geográficas potenciales.

An investigation on the pay-off to generic competences for core employees in Catalan manufacturing firms

The aim of this paper is to measure the returns to human capital. We use a unique data set consisting of matched employer-employee information. Data on individuals' human capital include a set of 26 competences that capture the utilization of workers' skills in a very detailed way. Thus, we can expand the concept of human capital and discuss the type of skills that are more productive in the workplace and, hence, generate a higher payoff for the workers. The rich information on firm's and workplace characteristics allows us to introduce a broad range of controls and to improve previous research in this field. This paper gives evidence that the returns to generic competences differ depending on the position of the worker in the firm. Only numeracy skills are reward independent of the occupational status of the worker. The level of technology used by the firm in the production process does not directly increase workers’ pay, but it influences the pay-off to some of the competences. JEL Classification: J24, J31

Design of Novel Frequency Generation Circuit with Application to Ultra-Wideband Distributed Oscillators

Given the urgence of a new paradigm in wireless digital trasmission which should allow for higher bit rate, lower latency and tigher delay constaints, it has been proposed to investigate the fundamental building blocks that at the circuital/device level, will boost the change towards a more efficient network architecture, with high capacity, higher bandwidth and a more satisfactory end user experience. At the core of each transciever, there are inherently analog devices capable of providing the carrier signal, the oscillators. It is strongly believed that many limitations in today's communication protocols, could be relieved by permitting high carrier frequency radio transmission, and having some degree of reconfigurability. This led us to studying distributed oscillator architectures which work in the microwave range and possess wideband tuning capability. As microvave oscillators are essentially nonlinear devices, a full nonlinear analyis, synthesis, and optimization had to be considered for their implementation. Consequently, all the most used nonlinear numerical techniques in commercial EDA software had been reviewed. An application of all the aforementioned techniques has been shown, considering a systems of three coupled oscillator ("triple push" oscillator) in which the stability of the various oscillating modes has been studied. Provided that a certain phase distribution is maintained among the oscillating elements, this topology permits a rise in the output power of the third harmonic; nevertheless due to circuit simmetry, "unwanted" oscillating modes coexist with the intenteded one. Starting with the necessary background on distributed amplification and distributed oscillator theory, the design of a four stage reverse mode distributed voltage controlled oscillator (DVCO) using lumped elments has been presented. All the design steps have been reported and for the first time a method for an optimized design with reduced variations in the output power has been presented. Ongoing work is devoted to model a wideband DVCO and to implement a frequency divider.

Automatic self-configuration of the logical network using distributed software agents

We present a system for dynamic network resource configuration in environments with bandwidth reservation. The proposed system is completely distributed and automates the mechanisms for adapting the logical network to the offered load. The system is able to manage dynamically a logical network such as a virtual path network in ATM or a label switched path network in MPLS or GMPLS. The system design and implementation is based on a multi-agent system (MAS) which make the decisions of when and how to change a logical path. Despite the lack of a centralised global network view, results show that MAS manages the network resources effectively, reducing the connection blocking probability and, therefore, achieving better utilisation of network resources. We also include details of its architecture and implementation

An ATM distributed simulator for network management research

Due to the high cost of a large ATM network working up to full strength to apply our ideas about network management, i.e., dynamic virtual path (VP) management and fault restoration, we developed a distributed simulation platform for performing our experiments. This platform also had to be capable of other sorts of tests, such as connection admission control (CAC) algorithms, routing algorithms, and accounting and charging methods. The platform was posed as a very simple, event-oriented and scalable simulation. The main goal was the simulation of a working ATM backbone network with a potentially large number of nodes (hundreds). As research into control algorithms and low-level, or rather cell-level methods, was beyond the scope of this study, the simulation took place at a connection level, i.e., there was no real traffic of cells. The simulated network behaved like a real network accepting and rejecting SNMP ones, or experimental tools using the API node