In situ fast ellipsometric analysis of repetitive surface phenomena

We present an ellipsometric technique and ellipsometric analysis of repetitive phenomena, based on the experimental arrangement of conventional phase modulated ellipsometers (PME) c onceived to study fast surface phenomena in repetitive processes such as periodic and triggered experiments. Phase modulated ellipsometry is a highly sensitive surface characterization technique that is widely used in the real-time study of several processes such as thin film deposition and etching. However, fast transient phenomena cannot be analyzed with this technique because precision requirements limit the data acquisition rate to about 25 Hz. The presented new ellipsometric method allows the study of fast transient phenomena in repetitive processes with a time resolution that is mainly limited by the data acquisition system. As an example, we apply this new method to the study of surface changes during plasma enhanced chemical vapor deposition of amorphous silicon in a modulated radio frequency discharge of SiH4. This study has revealed the evolution of the optical parameters of the film on the millisecond scale during the plasma on and off periods. The presented ellipsometric method extends the capabilities of PME arrangements and permits the analysis of fast surface phenomena that conventional PME cannot achieve.

In situ spectroellipsometric study of the nucleation and growth of amorphous silicon

A detailed in situ spectroellipsometric analysis of the nucleation and growth of hydrogenated amorphous silicon (a:Si:H) is presented. Photoelectronic quality a‐Si:H films are deposited by plasma‐enhanced chemical vapor deposition on smooth metal (NiCr alloy) and crystalline silicon (c‐Si) substrates. The deposition of a‐Si:H is analyzed from the first monolayer up to a final thickness of 1.2 μm. In order to perform an improved analysis, real time ellipsometric trajectories are recorded, using fixed preparation conditions, at various photon energies ranging from 2.2 to 3.6 eV. The advantage of using such a spectroscopic experimental procedure is underlined. New insights into the nucleation and growth mechanisms of a‐Si:H are obtained. The nucleation mechanism on metal and c‐Si substrates is very accurately described assuming a columnar microstructural development during the early stage of the growth. Then, as a consequence of the incomplete coalescence of the initial nuclei, a surface roughness at the 10-15 Å scale is identified during the further growth of a‐Si:H on both substrates. The bulk a‐Si:H grows homogeneously beneath the surface roughness. Finally, an increase of the surface roughness is evidenced during the long term growth of a‐Si:H. However, the nature of the substrate influenced the film growth. In particular, the film thickness involved in the nucleation‐coalescence phase is found lower in the case of c‐Si (67±8 Å) as compared to NiCr (118±22 Å). Likewise films deposited on c‐Si present a smaller surface roughness even if thick samples are considered (>1 μm). More generally, the present study illustrates the capability of in situ spectroellipsometry to precisely analyze fundamental processes in thin‐film growth, but also to monitor the preparation of complex structures on a few monolayers scale.

The participation of women in peace processes: the other tables

This paper argues that women’s absence in peace processes cannot be explained by their alleged lack of experience in dialogue and negotiation, but by a serious lack of will to include them in such important initiatives of change. Women have wide ranging experience in dialogue processes including many war and post-war contexts, but there has been a deliberate lack of effort to integrate them in formal peace processes. After introducing the research framework, the paper addresses women’s involvement in peace, and analyzes the role played by women in peace processes, through the cases of Sri Lanka and Northern Ireland. The paper concludes that peace processes are as gendered as wars, and for that reason gender has to be a guiding line for including women in peace processes.

The Role of the European Union in the Processes to Ban Cluster Munitions

At the end of 2008 the Convention on Cluster Munitions (CCM) that outlawed almost all types of cluster munitions was signed. It was the product of the so-called Oslo process, which had been set up two years earlier as a reaction to the failure to add a new protocol banning cluster munitions to the Convention on Certain Conventional Weapons (CCW). The position of the EU in these two processes was ambivalent: on the one hand it belonged to the strongest proponents for a new protocol within the CCW, but on the other hand the member states were in general not able to act jointly in the Oslo Process. According to this working paper especially the aspect of national security and the related relationship to the United States influenced the stances of many member states and complicated the formation of a common European position. There were common normative values of the EU detected, which played a role in the CCW, but they were only secondary to other interests of the member states.

Mieloma múltiple: rendimiento del estudio del cariotipo por técnicas convencionales y de hibridación in situ fluorescente. Significado pronóstico de las ganacias de 1 q.

En éste estudio analizamos el rendimiento de las técnicas citogenéticas utilizadas en los protocolos diagnósticos del MM (CC y técnicas de FISH). En primer lugar caracterizamos la serie de pacientes y los estratificamos en grupos de riesgo según los sistemas de estadificación actuales. Después estudiamos el porcentaje de cariotipos patológicos con cada una de las técnicas y en conjunto, encontrando un 40% de cariotipos patológicos por CC y de estos un 11,5% pertenecían a estudios con recuentos de CP ≤20% por citomorfología. La técnica de FISH aumentó hasta un 68% los cariotipos patológicos. También hemos realizado la caracterización de los pacientes con ganancias de 1q y su impacto en la evolución de la enfermedad.

Intelligent PCA contribution analysis for quality estimation in batch processes. Application in a sequencing batch reactor for wastewater treatment

En aquest treball, es proposa un nou mètode per estimar en temps real la qualitat del producte final en processos per lot. Aquest mètode permet reduir el temps necessari per obtenir els resultats de qualitat de les anàlisi de laboratori. S'utiliza un model de anàlisi de componentes principals (PCA) construït amb dades històriques en condicions normals de funcionament per discernir si un lot finalizat és normal o no. Es calcula una signatura de falla pels lots anormals i es passa a través d'un model de classificació per la seva estimació. L'estudi proposa un mètode per utilitzar la informació de les gràfiques de contribució basat en les signatures de falla, on els indicadors representen el comportament de les variables al llarg del procés en les diferentes etapes. Un conjunt de dades compost per la signatura de falla dels lots anormals històrics es construeix per cercar els patrons i entrenar els models de classifcació per estimar els resultas dels lots futurs. La metodologia proposada s'ha aplicat a un reactor seqüencial per lots (SBR). Diversos algoritmes de classificació es proven per demostrar les possibilitats de la metodologia proposada.

Preparation and properties of starch-based biopolymers modified with difunctional isocyanates

The present work reports on the preparation of thermoplastic starch (TPS) modified in situ with a diisocyanate derivative. Evidence of the condensation reaction between the hydroxyl groups of starch and glycerol with the isocyanate function (NCO) was confirmed by FTIR analysis. The evolution of the properties of the ensuing TPS, in term of mechanical properties, microstructure, and water sensitivity, was investigated using tensile mechanical, dynamic mechanical thermal analysis (DMTA), X-ray diffraction (XRD), and water uptake. The results showed that the addition of isocyanate did not affect the crystallinity of the TPS and slightly reduced the water uptake of the material. The evolution of the mechanical properties with ageing became less pronounced by the addition of the isocyanate as their amount exceeded 4 to 6wt%.

QuesTInSitu: from tests to routes for assessment in situ activities

Test-based assessment tools are mostly focused on the use of computers. However, advanced Information and Communication Technologies, such as handheld devices, opens up the possibilities of creating new assessment scenarios, increasing the teachers’ choices to design more appropriate tests for their subject areas. In this paper we use the term Computing-Based Testing (CBT) instead of Computer-Based Testing, as it captures better the emerging trends. Within the CBT context, the paper is centred on proposing an approach for “Assessment in situ” activities, where questions have to be answered in front of a real space/location (situ). In particular, we present the QuesTInSitu software implementation that includes both an editor and a player based on the IMS Question and Test Interoperability specification and GoogleMaps. With QuesTInSitu teachers can create geolocated questions and tests (routes), and students can answer the tests using mobile devices with GPS when following a route. Three illustrating scenarios and the results from the implementation of one of them in a real educational situation show that QuesTInSitu enables the creation of innovative, enriched and context-aware assessment activities. The results also indicate that the use of mobile devices and location-based systems in assessment activities facilitates students to put explorative and spatial skills into practice and fosters their motivation, reflection and personal observation.

Particle agglomeration study in rf silane plasmas: In situ study by polarization-sensitive laser light scattering

To determine self‐consistently the time evolution of particle size and their number density in situ multi‐angle polarization‐sensitive laser light scattering was used. Cross‐polarization intensities (incident and scattered light intensities with opposite polarization) measured at 135° and ex situ transmission electronic microscopy analysis demonstrate the existence of nonspherical agglomerates during the early phase of agglomeration. Later in the particle time development both techniques reveal spherical particles again. The presence of strong cross‐polarization intensities is accompanied by low‐frequency instabilities detected on the scattered light intensities and plasma emission. It is found that the particle radius and particle number density during the agglomeration phase can be well described by the Brownian free molecule coagulation model. Application of this neutral particle coagulation model is justified by calculation of the particle charge whereby it is shown that particles of a few tens of nanometer can be considered as neutral under our experimental conditions. The measured particle dispersion can be well described by a Brownian free molecule coagulation model including a log‐normal particle size distribution.

Long-range-interactions induced ordered structures in deposition processes

We present a new model of sequential adsorption in which the adsorbing particles experience dipolar interactions. We show that in the presence of these long-range interactions, highly ordered structures in the adsorbed layer may be induced at low temperatures. The new phenomenology is manifest through significant variations of the pair correlation function and the jamming limit, with respect to the case of noninteracting particles. Our study could be relevant in understanding the adsorption of magnetic colloidal particles in the presence of a magnetic field.

A general approach to the in situ energy butget of Eudendrium racemosum (Cnidaria, Hydrozoa) in the Western Mediterranean

An in situ energy budget of the hydropolyp Eudendrium racemosum (Cavolini, 1785) is presented. Ingestion and respiration rates and ammonium excretion were studied over two 24 h cycles, with two-hour sample intervals. The species ingested as much as 25.9% of its own biomass per day (minimum rate). Respiration was 1.62 ml O2 g-1 d w h-1 while excretion was 13.6 mM NH4 g-1dw h-1. We estimated that the species increased its biomass at a rate of 9.6% per day (Growth + Reproduction). This value is higher than those previously reported for other cnidarians. We can assume that the capacity of E. racemosum to survive - albeit for a limited period of the year - in the highly-competitive shallow-water communities is based on its high growth rate.

Sedimen-water nutrient fluxes: Preliminary results of in situ measurements in Alfaques Bay, Ebro River Delta.

Sediment-water exchanges of oxygen, ammonium, nitrate, total dissolved nitrogen, phosphate and total dissolved phosphorus were measured by means of an in situ incubator of 7 1 volume and 700 cm2 base area. The incubations lasted for three hours and were done over a whole season on different kinds of sediments in Alfaques Bay. We present some preliminary results on: i) methodological aspects, ii) spatial and temporal variability of fluxes, and iii) estimates of contribution of benthic nutrient regeneration relative to total nutrient loading of the Bay. Oxygen uptake averaged 1700 mmo1 m-2 h-1 (range 200-3500); no differences were found between sandy and muddy sediments. The release of ammonia from the sediment averaged 70 mmo1 m-2 h-1 and was higher in muddy sediments than in sandy ones. Very low to null nitrate and nitrite fluxes and only small fluxes of organic nitrogen were detected. We conclude that ammonium release from sediment is the major path of nitrogen regeneration. Some sediments removed dissolved reactive phosphorus (DRP) from the water and released dissolved organic phosphorus (DOP). Additional manipulative experiments revealed DRP release under particular conditions (turbulence, anoxia). From these data, we estimate that at least 50% of the nitrogen requirements of phytoplankton in the area may be supplied by benthic remineralization.

Consells d’extracció i conservació del material arqueològic in situ

Aquest petit treball pretén esdevenir una guia bàsica per aquells arqueòlegs que desconeixen l’aspecte conservatiu dels materials arqueològics. Així, en primer lloc analitzarem, a grans trets, la composició físicoquímica dels diferents objectes que podem trobar en una excavació i quins són els agents que més els malmeten. Després tractarem d’introduir alguns consells pràctics pel treball de camp.