Referral from primary care to a physical activity programme: establishing long-term adherence? A randomized controlled trial. Rationale and study design

Background: Declining physical activity is associated with a rising burden of global disease. There is little evidence about effective ways to increase adherence to physical activity. Therefore, interventions are needed that produce sustained increases in adherence to physical activity and are cost-effective. The purpose is to assess the effectiveness of a primary care physical activity intervention in increasing adherence to physical activity in the general population seen in primary care. Method and design: Randomized controlled trial with systematic random sampling. A total of 424 subjects of both sexes will participate; all will be over the age of 18 with a low level of physical activity (according to the International Physical Activity Questionnaire, IPAQ), self-employed and from 9 Primary Healthcare Centres (PHC). They will volunteer to participate in a physical activity programme during 3 months (24 sessions; 2 sessions a week, 60 minutes per session). Participants from each PHC will be randomly allocated to an intervention (IG) and control group (CG). The following parameters will be assessed pre and post intervention in both groups: (1) health-related quality of life (SF-12), (2) physical activity stage of change (Prochaska's stages of change), (3) level of physical activity (IPAQ-short version), (4) change in perception of health (vignettes from the Cooperative World Organization of National Colleges, Academies, and Academic Associations of Family Physicians, COOP/WONCA), (5) level of social support for the physical activity practice (Social Support for Physical Activity Scale, SSPAS), and (6) control based on analysis (HDL, LDL and glycated haemoglobin).Participants' frequency of visits to the PHC will be registered over the six months before and after the programme. There will be a follow up in a face to face interview three, six and twelve months after the programme, with the reduced version of IPAQ, SF-12, SSPAS, and Prochaska's stages. Discussion: The pilot study showed the effectiveness of an enhanced low-cost, evidence-based intervention in increased physical activity and improved social support. If successful in demonstrating long-term improvements, this randomised controlled trial will be the first sustainable physical activity intervention based in primary care in our country to demonstrate longterm adherence to physical activity. Trial Registration: A service of the U.S. National Institutes of Health. Developed by the National Library of Medicine. ClinicalTrials.gov ID: NCT00714831.

Clean Development Mechanism and Sustainable Development: a discussion on the link between the CDM and Sustainable Development, an analysis of the current status of the CDM portfolio, and an multicriteria evaluation of the effects of additional incentives in order to foster broad local Sustainable Development dividends from the CDM projects

vegeu resum en el fitxer adjunt a l'inici del treball de recerca

Limited liability and mechanism design in procurement

In the presence of cost uncertainty, limited liability introduces the possibility of default in procurement with its associated bank-ruptcy costs. When financial soundness is not perfectly observable, we show that incentive compatibility implies that financially less sound contractors are selected with higher probability in any feasible mechanism. Informational rents are associated with unsound financial situations. By selecting the financially weakest contractor, stronger price competition (auctions) may not only increase the probability of default but also expected rents. Thus, weak conditions are suffcient for auctions to be suboptimal. In particular, we show that pooling firms with higher assets may reduce the cost of procurement even when default is costless for the sponsor.

Schemata as a framework for full body and physical design interfaces

Digital art interfaces presents cognitiveparadigms that deals with the recognition of the symbols and representations through interaction.What is presented in this paper is anapproximation of the bodily experience in that particular scenario and a new proposal which has the aim to contribute more ideas and criteria in the analysis of the learning process of aparticipant discovering an interactive space or interface. For that I propose a first new approach where metaphorically I tried to extrapolate the stages of the psychology of development stated byJean Piaget in the interface design domain.

Promoting Metacognitive Skills in a CSCL environment: implications for instructional and technology design

This paper aims to better understand the development of students’ learning processes when participating actively in a specific Computer Supported Collaborative Learning system called KnowCat. To this end, a longitudinal case study was designed, in which eighteen university students took part in a 12-month (two semesters) learning project. During this time period, the students followed an instructional process, using some elements of KnowCat (KnowCat key features) design to support and improve their interaction processes, especially peer learning processes. Our research involved both supervising the students’ collaborative learning processes throughout the learning project and focusing our analysis on the qualitative evolution of the students’ interaction processes and on the development of metacognitive learning processes. The results of the current research reveal that the instructional application of the CSCL-KnowCat system may favour and improve the development of the students’ metacognitive learning processes. Additionally, the implications of the design of computer supported collaborative learning networks and pedagogical issues are discussed in this paper.

Inclusion and empowerment in public art and urban design

To involve citizens in developing the processes of city making is an objective that occupies part of the agenda of political parties in the context of the necessary renewal in representative democracy. This paper aims to provide some answers to the following questions: Is it possible to overcome the participatory processes based exclusively on the consultation? Is it possible to"train" residents to take an active role in decision-making? How can we manage, proactively, the relationship between public actors, technicians and politicians, in a participatory process? We analyse the process development for creating the Wall of Remembrance in the Barcelona neighbourhood of Baró de Viver, a work of public art, created and produced by its neighbours, in the context of a long participatory process focused on changing the image of the neighbourhood and the improvement of public space. This result and this process have been possible in a given context of cooperation among neighbours, local government and the research team (CR-Polis, Art, City, Society at the University of Barcelona). The development of a creative process of citizen participation between 2004 and 2011 made possible the direct management of decision making by the residents on the field of the design of public space in the neighbourhood. However, the material results of the process does not overshadow the great achievement of the project: the inclusion of a neighbourhood in taking informed decisions because of their empowerment in public space design and management of their remembrances.

Effectiveness of a primary care-based intervention to reduce sitting time in overweight and obese patients (SEDESTACTIV): a randomized controlled trial; rationale and study design

Background: There is growing evidence suggesting that prolonged sitting has negative effects on people's weight, chronic diseases and mortality. Interventions to reduce sedentary time can be an effective strategy to increase daily energy expenditure. The purpose of this study is to evaluate the effectiveness of a six-month primary care intervention to reduce daily of sitting time in overweight and mild obese sedentary patients. Method/Design: The study is a randomized controlled trial (RCT). Professionals from thirteen primary health care centers (PHC) will randomly invite to participate mild obese or overweight patients of both gender, aged between 25 and 65 years old, who spend 6 hours at least daily sitting. A total of 232 subjects will be randomly allocated to an intervention (IG) and control group (CG) (116 individuals each group). In addition, 50 subjects with fibromyalgia will be included. Primary outcome is: (1) sitting time using the activPAL device and the Marshall questionnaire. The following parameters will be also assessed: (2) sitting time in work place (Occupational Sitting and Physical Activity Questionnaire), (3) health-related quality of life (EQ-5D), (4) evolution of stage of change (Prochaska and DiClemente's Stages of Change Model), (5) physical inactivity (catalan version of Brief Physical Activity Assessment Tool), (6) number of steps walked (pedometer and activPAL), (7) control based on analysis (triglycerides, total cholesterol, HDL, LDL, glycemia and, glycated haemoglobin in diabetic patients) and (8) blood pressure and anthropometric variables. All parameters will be assessed pre and post intervention and there will be a follow up three, six and twelve months after the intervention. A descriptive analysis of all variables and a multivariate analysis to assess differences among groups will be undertaken. Multivariate analysis will be carried out to assess time changes of dependent variables. All the analysis will be done under the intention to treat principle. Discussion: If the SEDESTACTIV intervention shows its effectiveness in reducing sitting time, health professionals would have a low-cost intervention tool for sedentary overweight and obese patients management.

Population-based multicase-control study in common tumors in Spain (MCC-Spain): rationale and study design

INTRODUCTION: We present the protocol of a large population-based case-control study of 5 common tumors in Spain (MCC-Spain) that evaluates environmental exposures and genetic factors. METHODS: Between 2008-2013, 10,183 persons aged 20-85 years were enrolled in 23 hospitals and primary care centres in 12 Spanish provinces including 1,115 cases of a new diagnosis of prostate cancer, 1,750 of breast cancer, 2,171 of colorectal cancer, 492 of gastro-oesophageal cancer, 554 cases of chronic lymphocytic leukaemia (CLL) and 4,101 population-based controls matched by frequency to cases by age, sex and region of residence. Participation rates ranged from 57% (stomach cancer) to 87% (CLL cases) and from 30% to 77% in controls. Participants completed a face-to-face computerized interview on sociodemographic factors, environmental exposures, occupation, medication, lifestyle, and personal and family medical history. In addition, participants completed a self-administered food-frequency questionnaire and telephone interviews. Blood samples were collected from 76% of participants while saliva samples were collected in CLL cases and participants refusing blood extractions. Clinical information was recorded for cases and paraffin blocks and/or fresh tumor samples are available in most collaborating hospitals. Genotyping was done through an exome array enriched with genetic markers in specific pathways. Multiple analyses are planned to assess the association of environmental, personal and genetic risk factors for each tumor and to identify pleiotropic effects. DISCUSSION: This study, conducted within the Spanish Consortium for Biomedical Research in Epidemiology & Public Health (CIBERESP), is a unique initiative to evaluate etiological factors for common cancers and will promote cancer research and prevention in Spain.

RTM mould design and construction for a DN 50 PN 16 flansch

The objective of this project consists of designing and constructing a RTM mould for a loose flange of glass fibre reinforced plastic (GRP). The design phase has the mission to realise a quality and simple design of the RTM mould, with the objective to obtain an easy and economic phase of construction and the more possible great characteristics of the loose flange. In fact this RTM mould will be a mould prototype, which will be developed in the future to obtain an RTM mould able to support a loose flange production. Therefore when more steps are developed in this project, then the future objective will be near

Analysis and Design of a secure WLAN solution for Cobre Las Cruces

Cobre Las Cruces is a renowned copper mining company located in Sevilla, with unexpected problems in wireless communications that have a direct affectation in production. Therefore, the main goals are to improve the WiFi infrastructure, to secure it and to detect and prevent from attacks and from the installation of rogue (and non-authorized) APs. All of that integrated with the current ICT infrastructure.This project has been divided into four phases, although only two of them have been included into the TFC; they are the analysis of the current situation and the design of a WLAN solution.Once the analysis part was finished, some weaknesses were detected. Subjects such as lack of connectivity and control, ignorance about installed WiFi devices and their localization and state and, by and large, the use of weak security mechanisms were some of the problems found. Additionally, due to the fact that the working area became larger and new WiFi infrastructures were added, the first phase took more time than expected.As a result of the detailed analysis, some goals were defined to solve and it was designed a centralized approach able to cope with them. A solution based on 802.11i and 802.1x protocols, digital certificates, a probe system running as IDS/IPS and ligthweight APs in conjunction with a Wireless LAN Controller are the main features.

Learning design twofold strategies for teacher-led inquiry andstudent active learning

This workshop paper states that fostering active student participation both in face-to-face lectures / seminars and outside the classroom (personal and group study at home, the library, etc.) requires a certain level of teacher-led inquiry. The paper presents a set of strategies drawn from real practice in higher education with teacher-led inquiry ingredients that promote active learning. Thesepractices highlight the role of the syllabus, the importance of iterative learning designs, explicit teacher-led inquiry, and the implications of the context, sustainability and practitioners’ creativity. The strategies discussed in this paper can serve as input to the workshop as real cases that need to be represented in design and supported in enactment (with and without technologies).

Costly search and design

Firms compete by choosing both a price and a design from a family of designs thatcan be represented as demand rotations. Consumers engage in costly sequential searchamong firms. Each time a consumer pays a search cost he observes a new offering. Anoffering consists of a price quote and a new good, where goods might vary in the extentto which they are good matches for the consumer. In equilibrium, only two design-styles arise: either the most niche where consumers are likely to either love or loathethe product, or the broadest where consumers are likely to have similar valuations. Inequilibrium, different firms may simultaneously offer both design-styles. We performcomparative statics on the equilibrium and show that a fall in search costs can lead tohigher industry prices and profits and lower consumer surplus. Our analysis is relatedto discussions of how the internet has led to the prevalence of niche goods and the"long tail" phenomenon.

The European Union Police Mission: The Beginning of a New Future for Bosnia and Herzegovina?

The creation, reform and/or restructuring of the police in post-conflict societies remains one of the key challenges for practitioners and scholars in the contemporary fields of peace and security, particularly due to the changing nature of conflicts. Since the 1990s the world has witnessed a proliferation of international police missions, with regional organisations gradually acquiring a prominent role. This paper analyses the 2003-2005 period of the European Union Police Mission (EUPM) in Bosnia and Herzegovina. Much is at stake in this mission, both in terms of the development of the EU´s external identity but also for Bosnia and Herzegovina’s road to EU membership and sustainable peace. This paper will argue that by 2005 the balance sheet was mixed. EUPM fell short of fulfilling its overall goal of ‘Europeanising’ Bosnian police services, and of its desire to be seen as providing that additional ingredient in police matters that would set it apart from the earlier UN mission. Nevertheless, despite its shortcomings, the Mission did not merit the harsh criticisms it was faced with. Its lack of success was not entirely the Mission’s doing. The paper focuses on three aspects: political and economic viability and sustainability, security levels in Bosnia and Herzegovina, and institution and capacity building. The explanatory framework used in this paper is based on the democratic policing discourse. In doing so the argument developed here will also shed light on the nature of so-called “best European practices” in police matters.