Nucleotide, cytogenetic and expression impact of the human chromosome 8p23.1 inversion polymorphism

Background: The human chromosome 8p23.1 region contains a 3.8–4.5 Mb segment which can be found in different orientations (defined as genomic inversion) among individuals. The identification of single nucleotide polymorphisms (SNPs) tightly linked to the genomic orientation of a given region should be useful to indirectly evaluate the genotypes of large genomic orientations in the individuals. Results: We have identified 16 SNPs, which are in linkage disequilibrium (LD) with the 8p23.1 inversion as detected by fluorescent in situ hybridization (FISH). The variability of the 8p23.1 orientation in 150 HapMap samples was predicted using this set of SNPs and was verified by FISH in a subset of samples. Four genes (NEIL2, MSRA, CTSB and BLK) were found differentially expressed (p<0.0005) according to the orientation of the 8p23.1 region. Finally, we have found variable levels of mosaicism for the orientation of the 8p23.1 as determined by FISH. Conclusion: By means of dense SNP genotyping of the region, haplotype-based computational analyses and FISH experiments we could infer and verify the orientation status of alleles in the 8p23.1 region by detecting two short haplotype stretches at both ends of the inverted region, which are likely the relic of the chromosome in which the original inversion occurred. Moreover, an impact of 8p23.1 inversion on gene expression levels cannot be ruled out, since four genes from this region have statistically significant different expression levels depending on the inversion status. FISH results in lymphoblastoid cell lines suggest the presence of mosaicism regarding the 8p23.1 inversion.

Evaluation of the chicken transcriptome by SAGE of B cells and the DT40 cell line

Background: The understanding of whole genome sequences in higher eukaryotes depends to a large degree on the reliable definition of transcription units including exon/intron structures, translated open reading frames (ORFs) and flanking untranslated regions. The best currently available chicken transcript catalog is the Ensembl build based on the mappings of a relatively small number of full length cDNAs and ESTs to the genome as well as genome sequence derived in silico gene predictions.Results: We use Long Serial Analysis of Gene Expression (LongSAGE) in bursal lymphocytes and the DT40 cell line to verify the quality and completeness of the annotated transcripts. 53.6% of the more than 38,000 unique SAGE tags (unitags) match to full length bursal cDNAs, the Ensembl transcript build or the genome sequence. The majority of all matching unitags show single matches to the genome, but no matches to the genome derived Ensembl transcript build. Nevertheless, most of these tags map close to the 3' boundaries of annotated Ensembl transcripts.Conclusions: These results suggests that rather few genes are missing in the current Ensembl chicken transcript build, but that the 3' ends of many transcripts may not have been accurately predicted. The tags with no match in the transcript sequences can now be used to improve gene predictions, pinpoint the genomic location of entirely missed transcripts and optimize the accuracy of gene finder software.

Real-time monitoring of the silicidation process of tungsten filaments at high temperature used as catalysers for silane decomposition

The scope of this work is the systematic study of the silicidation process affecting tungsten filaments at high temperature (1900ºC) used for silane decomposition in the hot-wire chemical vapour deposition technique (HWCVD). The correlation between the electrical resistance evolution of the filaments, Rfil(t), and the different stages of the their silicidation process is exposed. Said stages correspond to: the rapid formation of two WSi2 fronts at the cold ends of the filaments and their further propagation towards the middle of the filaments; and, regarding the hot central portion of the filaments: a initial stage of silicon dissolution into the tungsten bulk, with a random duration for as-manufactured filaments, followed by the inhomogeneous nucleation of W5Si3 (which is later replaced by WSi2) and its further growth towards the filaments core. An electrical model is used to obtain real-time information about the current status of the filaments silicidation process by simply monitoring their Rfil(t) evolution during the HWCVD process. It is shown that implementing an annealing pre-treatment to the filaments leads to a clearly repetitive trend in the monitored Rfil(t) signatures. The influence of hydrogen dilution of silane on the filaments silicidation process is also discussed.

From room for books to room for users: an old infantry barrack as an answer to the lack of space

At the beginning of the 21st century, some Catalan university libraries detected a need stemming from the lack of space and the reconversion of physical libraries within the new European educational panorama. With the same cooperative spirit that characterized previous CBUC (Consortium of Academic Libraries of Catalonia) programs and services, the Consortium set in motion a project to address this need. An initial study was commissioned in 2002, and in 2003 a suitable building (old infantry barracks) was found in Lleida. The official opening took place in 2008. GEPA (Guaranteed Space for the Preservation of Access) facility is a cooperative repository, whose objectives are to store and preserve low use documents, ensuring their future access when needed, to convert room for books into room for library users, and doing it saving both space and money. The paper presents a brief historical introduction about the physical management of collections in libraries, and a short overview about high density library repositories all over the world, as an answer to the pressing problem of lack of spaces. The main goals of the communication are to comment the architectural project and its librarian issues, and to show how the GEPA facility allowed to change the spaces in university libraries in Catalonia. On the one hand, the paper deals with the selection of an old building to be renovated, the determination of the librarian needs, the compact shelving system chosen to store the documents in the building, the relation between physical space and information management, and the logistics involved in the load of low use documents from the libraries into the facility. On the other hand, we will show some examples of physical changes in Catalan libraries after large loads of documents to GEPA.

Effect of dripline flushing on subsurface drip irrigation systems

The velocity of dripline flushing in subsurface drip irrigation (SDI) systems affects system design, cost, management, performance, and longevity. A 30‐day field study was conducted at Kansas State University to analyze the effect of four targeted flushing velocities (0.23, 0.30, 0.46, and 0.61 m/s) for a fixed 15 min duration of flushing and three flushing frequencies (no flushing or flushing every 15 or 30 days) on SDI emitter discharge and sediments within the dripline and removed in the flushing water. At the end of the field experiment (371 h), the amount of solids carried away by the flushing water and retained in every lateral were determined as well as laboratory determination of emitter discharge for every single emitter within each dripline. Greater dripline flushing velocities, which also resulted in greater flushing volumes, tended to result in greater amounts of solids in the flushing water, but the differences were not always statistically significant. Neither the frequency of flushing nor the interaction of flushing frequency and velocity significantly affected the amount of solids in the flushing water. There was a greater concentration of solids in the beginning one‐third of the 90 m laterals, particularly for treatments with no flushing or with slower dripline flushing velocities. As flushing velocity and concurrently flushing volume increased, there was a tendency for greater solids removal and/or more equal distribution within the dripline. At the end of the field study, the average emitter discharge as measured in the laboratory for a total of 3970 emitters was 0.64 L/h. which was significantly less (approximately 2.5%) than the discharge for new and unused emitters. Only six emitters were nearly or fully clogged, with discharges between 0% and 5% of new and unused emitters. Flushing velocity and flushing frequency did not have consistent significant effects on emitter discharge, and those numerical differences that did exist were small (<3%). Emitter discharge was approximately 3% less for the distal ends of the driplines (last 20% of the dripline). Although not a specific factor in the study, the results of solids removals during flushing and solids retention within the different dripline sections suggest that duration of flushing may be a more cost‐effective management option than increasing the dripline flushing velocity through SDI system design. Finally, although microirrigation system components have been improved over the years, the need for flushing to remove solids and reduce clogging potential has not been eliminated

Análisis de los residuos sólidos generados en áreas administrativas, académicas, bibliotecas y cómputos, de ciudad universitària en la UMSNH, Michoacán, México

El proyecto se enmarca dentro de Plan Ambiental Institucional (PAI) de la Universidad Michoacana de San Nicolás de Hidalgo (UMSNH), México, en lo referente a la gestión de residuos y tiene por finalidad analizar la tipología y composición de los residuos que se generan en algunas de las áreas de Ciudad Universitaria (CU). Para esto se realizó una metodología de recogida no selectiva de residuos puerta a puerta que se estructuró en dos fases, la primera, con el objetivo de obtener toda la información sobre el número y tipo de espacios de los edificios para luego elaborar y llevar a cabo el muestreo de los residuos, y la segunda, que se centró en la captura informática y gestión de los pesos de los mismos. De los datos obtenidos se concluyó que los residuos de mayor peso muestreado fueron el papel, la materia orgánica, el cartón y el vidrio transparente, los residuos de mayor generación per cápita fueron el papel, cartucho de impresora, CD y disquete. Finalmente, se concluye que la UMSNH no da tratamiento a los residuos que al ser depositados al aire libre contaminan su medio ambiente. Reciclándolos podrían obtenerse no sólo beneficios ambientales sino también económicos, que disminuirían el costo del reciclado devolviendo los residuos al ciclo productivo.

GNSS array: diseño de una antena con polarización circular

Aquest projecte es centra en el disseny d’una antena microstrip per a GNSS. Una antena per a GNSS ha de tenir adaptació de impedància d’entrada i polarització circular a dretes, com a principals especificacions, en el rang de 1.15-1.6 GHz. El tipus d’alimentació d’una antena microstrip amb el major ample de banda d’adaptació és l’alimentació mitjançant acoblament per apertura. Si a l’antena s’introdueixen dos apertures de forma ortogonal, alimentades amb un desfasament de 90º entre elles, s’aconsegueix polarització circular. L’opció de separar les apertures redueix la transferència de potència entre elles, i disminueix el guany de polarització creuada. La xarxa d’alimentació dissenyada és un divisor de Wilkinson amb una línia de λ/4 a la freqüència central, encara que el desfasament als extrems de la banda no sigui de 90º. Com a xarxa d’alimentació es va provar un hibrid de 90º, però l’elevat valor del paràmetre S21 de l’antena impossibilita l’adaptació a l’entrada del hibrid.

Telomere characterization in the Asteraceae family

Asteraceae or Compositae constitute one of the largest families of the angiosperms, distributed over all continents but in Antarctica, particularly well represented in temperate zones and less frequent in tropical regions. The Asteraceae have been the object of a great deal of attention from all viewpoints for their scientific as well as economic interest. Telomeres sequences are highly conservated at the ends of chromosomes across the eukaryotes. In plants, generally are formed by tandemly repeated sequences named Arabidopsis type but several exceptions have been described. The objective of the present work is to study the telomeric characterization along the whole Asteraceae family and to find, if any, the relationships between these results and the evolutionary history in this family.

Anàlisi, diseny i implementació d'un aplicació de gestió d'espais fent servir l'arquitectura J2EE

L'objectiu principal d'aquest treball és exposar tots els passos seguits per a desenvolupar un projecte (anàlisi, disseny, implementació i proves) que utilitza una tecnologia determinada: l'arquitectura J2EE, una arquitectura escalable que permet un desenvolupament simplificat dels projectes d'aplicacions. El projecte escollit és una aplicació de gestió d'espais, la finalitat del qual és gestionar els espais que pertanyen a una entitat multiespacial, com ara una universitat o un hospital.

Correlations between black holes formed in cosmic string breaking

An analysis of cosmic string breaking with the formation of black holes attached to the ends reveals a remarkable feature: the black holes can be correlated or uncorrelated. We find that, as a consequence, the number-of-states enhancement factor in the action governing the formation of uncorrelated black holes is twice the one for a correlated pair. We argue that when an uncorrelated pair forms at the ends of the string, the physics involved is more analogous to thermal nucleation than to particle-antiparticle creation. Also, we analyze the process of intercommuting strings induced by black hole annihilation and merging. Finally, we discuss the consequences for grand unified strings. The process whereby uncorrelated black holes are formed yields a rate which significantly improves over those previously considered, but still not enough to modify string cosmology. 1995 The American Physical Society.

First-passage-time noninteger moments for some diffusion and dichotomous processes

We calculate noninteger moments ¿tq¿ of first passage time to trapping, at both ends of an interval (0,L), for some diffusion and dichotomous processes. We find the critical behavior of ¿tq¿, as a function of q, for free processes. We also show that the addition of a potential can destroy criticality.

Energy relaxation in nonlinear one-dimensional lattices

We study energy relaxation in thermalized one-dimensional nonlinear arrays of the Fermi-Pasta-Ulam type. The ends of the thermalized systems are placed in contact with a zero-temperature reservoir via damping forces. Harmonic arrays relax by sequential phonon decay into the cold reservoir, the lower-frequency modes relaxing first. The relaxation pathway for purely anharmonic arrays involves the degradation of higher-energy nonlinear modes into lower-energy ones. The lowest-energy modes are absorbed by the cold reservoir, but a small amount of energy is persistently left behind in the array in the form of almost stationary low-frequency localized modes. Arrays with interactions that contain both a harmonic and an anharmonic contribution exhibit behavior that involves the interplay of phonon modes and breather modes. At long times relaxation is extremely slow due to the spontaneous appearance and persistence of energetic high-frequency stationary breathers. Breather behavior is further ascertained by explicitly injecting a localized excitation into the thermalized arrays and observing the relaxation behavior.

Els espais dels serveis educatius de Pistoia: Una eina per a la inclusió

Aquest treball té com a objectiu aprofundir en la importància que tenen els espais de les escoles dels Serveis Educatius de Pistoia en la inclusió i l’atenció a la diversitat. Per aquest motiu, després d’una recerca teòrica que contextualitza aquests serveis, es troba un anàlisi que relaciona els resultats d’aquesta primera part teòrica amb una segona part pràctica portada a terme durant un període de pràctiques en tres escoles d’aquests serveis educatius, una d’elles és un Asilo Nido i les altres dues són Scuole dell’infanzia.

Característiques bàsiques de l’organització d’espais, d’ambients i dels tipus de materials que hauria d’estar present en les escoles d’educació infantil (3-6) per garantir pràctiques educatives de qualitat

Amb el present treball es vol aprofundir en la manera que influeix l’organització d’espais, d’ambients i les característiques dels materials en el procés educatiu. A partir d’una recerca teòrica en base les necessitats educatives de la societat actual, les necessitats evolutives dels infants, i en base a l’observació i anàlisi d’escoles reggianes i catalanes referents que tenen en compte com a agent educador l’espai, els ambients i els materials, es volen reunir quines són les característiques bàsiques de l’organització dels espais, ambients i materials per garantir una educació de qualitat a l’etapa infantil (3-6).

Tailored Jeffamine molecular tools for ordering mesoporous Silica

Herein, we report the formation of organized mesoporous silica materials prepared from a novel nonionic gemini surfactant, myristoyl-end capped Jeffamine, synthesized from a polyoxyalkyleneamine (ED900). The behavior of the modified Jeffamine in water was first investigated. A direct micellar phase (L1) and a hexagonal (H1) liquid crystal were found. The structure of the micelles was investigated from the SAXS and the analysis by Generalized Indirect Fourier Transformation (GIFT), which show that the particles are globular of coreshell type. The myristoyl chains, located at the ends of the amphiphile molecule are assembled to form the core of the micelles and, as a consequence, the molecules are folded over on themselves. Mesoporous materials were then synthesized from the self-assembly mechanism. The recovered materials were characterized by SAXS measurements, nitrogen adsorptiondesorption analysis, transmission and scanning electron microscopy. The results clearly evidence that by modifying the synthesis parameters, such as the surfactant/silica precursor molar ratio and the hydrothermal conditions, one can control the size and the nanostructuring of the resulting material. It was observed that, the lower the temperature of the hydrothermal treatment, the better the mesopore ordering.