Mecanismos de deformación en aceros inoxidables austeníticos metaestables

La deformación plástica puede inducir a la transformación de la austenita a martensita en los aceros inoxidables austeníticos metaestables. Para analizar este hecho, el inoxidable austenítico metaestable grado AISI 301 LN fue estudiado en dos condiciones diferentes: recocido y laminado en frío. En el primer caso, el acero era completamente austenítico, mientras que después de la laminación presentaba un importante porcentaje de α’-martensita. Se evaluó el cambio de fase cuando el acero es sometido a ensayos monotónicos y cíclicos, así como cuando ha sido modificada la superficie mediante el granallado o se han realizado tratamientos térmicos de reversión. Se utilizaron diferentes técnicas de caracterización microestructural para detectar y cuantificar la martensita, como microscopía óptica, difracción de rayos-X (DRX) y difracción de electrones retrodispersados (EBSD); como también de caracterización mecánica para evaluar el comportamiento de los aceros, trabajo esencial de fractura (TEF), conformabilidad, fatiga de alto número de ciclos (HCF) y nanoindentación. Los resultados mostraron un incremento en la resistencia mecánica del acero laminado en comparación al acero recocido; este hecho está relacionado con la presencia de martensita originada por la laminación. Sin embargo, en términos de deformación y endurecimiento el acero recocido presenta un mejor desempeño como consecuencia del elevado porcentaje de fase austenítica. Así mismo, revertir la martensita de laminación a austenita y refinar la austenita presente permite obtener un acero con una propiedades mecánicas similares a cuando esta en la condición laminado.

Behavior study of pipes after forming, coating and bending

A study of the main types of coatings and its processes that modern industry commonly apply to prevent to the corrosion due to the environmental effects to energetic market pipelines have been done. Extracting main time and temperature range values, coating heat treatment recreation have been applied to x65 pipelines steel grade samples obtained from a pipe which was formed using UOE forming process. Experimental tensile tests and Charpy V‐Notch Impact test have been carried out for a deeply knowledge of the influence on the steel once this recreations are applied. The Yield Strength and toughness have been improved despite lower values in rupture strain and ductile‐brittle temperature transition have been obtained. Finite Element Method have been applied to simulate the entirely pipe cold bending process to predict the mechanical properties and behaviour of the pipe made from x65 steel grade under different conditions.

Thermal evolution of gene expression profiles in Drosophila subobscura

Background: Despite its pervasiveness, the genetic basis of adaptation resulting in variation directly or indirectly related to temperature (climatic) gradients is poorly understood. By using 3-fold replicated laboratory thermal stocks covering much of the physiologically tolerable temperature range for the temperate (i.e., cold tolerant) species Drosophila subobscura we have assessed whole-genome transcriptional responses after three years of thermal adaptation, when the populations had already diverged for inversion frequencies, pre-adult life history components, and morphological traits. Total mRNA from each population was compared to a reference pool mRNA in a standard, highly replicated two-colour competitive hybridization experiment using cDNA microarrays.Results: A total of 306 (6.6%) cDNA clones were identified as 'differentially expressed' (following a false discovery rate correction) after contrasting the two furthest apart thermal selection regimes (i.e., 13°C vs . 22°C), also including four previously reported candidate genes for thermotolerance in Drosophila (Hsp26, Hsp68, Fst, and Treh). On the other hand, correlated patterns of gene expression were similar in cold- and warm-adapted populations. Analysis of functional categories defined by the Gene Ontology project point to an overrepresentation of genes involved in carbohydrate metabolism, nucleic acids metabolism and regulation of transcription among other categories. Although the location of differently expressed genes was approximately at random with respect to chromosomes, a physical mapping of 88 probes to the polytene chromosomes of D. subobscura has shown that a larger than expected number mapped inside inverted chromosomal segments.Conclusion: Our data suggest that a sizeable number of genes appear to be involved in thermal adaptation in Drosophila, with a substantial fraction implicated in metabolism. This apparently illustrates the formidable challenge to understanding the adaptive evolution of complex trait variation. Furthermore, some clustering of genes within inverted chromosomal sections was detected. Disentangling the effects of inversions will be obviously required in any future approach if we want to identify the relevant candidate genes.

Photocatalytic Activity of Nanostructured Anatase Coatings Obtained by Cold Gas Spray

This article describes a photocatalytic nanostructured anatase coating deposited by cold gas spray (CGS)supported on titanium sub-oxide (TiO22x) coatings obtained by atmospheric plasma spray (APS) onto stainless steel cylinders. The photocatalytic coating was homogeneous and preserved the composition and nanostructure of the starting powder. The inner titanium sub-oxide coating favored the deposition of anatase particles in the solid state. Agglomerated nano-TiO2 particles fragmented when impacting onto the hard surface of the APS TiO22x bond coat. The rough surface provided by APS provided an ideal scenario for entrapping the nanostructured particles, which may be adhered onto the bond coat due to chemical bonding; a possible bonding mechanism is described. Photocatalytic experiments showed that CGS nano-TiO2 coating was active for photodegrading phenol and formic acid under aqueous conditions. The results were similar to the performance obtained by competitor technologies and materials such as dip-coating P25 photocatalysts. Disparity in the final performance of the photoactive materials may have been caused by differences in grain size and the crystalline composition of titanium dioxide.

Metabolic profiles of countries and ecological distribution conflicts.

"Social metabolism" is a notion that links up the natural sciences and the social sciences, and also human history. Work has been done by some groups in Europe in order to operationalize the old idea of looking at the economy from the point of view of "social metabolism". This paper is an attempt to consider the links between each society’s characteristic metabolic profile and the ecological distribution conflicts, at different scales (international, national, regional).

Periodic orbits near a heteroclinic loop formed by one dimensional orbit and a 2-dimensional manifold: application to the charged collinear 3-body problem

The paper is devoted to the study of a type of differential systems which appear usually in the study of some Hamiltonian systems with 2 degrees of freedom. We prove the existence of infinitely many periodic orbits on each negative energy level. All these periodic orbits pass near the total collision. Finally we apply these results to study the existence of periodic orbits in the charged collinear 3–body problem.

Comportamiento tribomecánico de sistemas de sustrato: recubrimiento duros

En aplicaciones como la conformación en frío, donde los metales duros recubiertos con películas de naturaleza cerámica son ampliamente empleados, la existencia de un contacto mecánico repetitivo induce tensiones Hertzianas y origina el fallo por fatiga. En este trabajo, se investigan diversos recubrimientos cerámicos depositados por deposición física desde fase vapor sobre calidades diferentes de metal duro y un acero rápido pulvimetalúrgico para evaluar sus respectivas respuesta al contacto y comportamiento a fatiga. El trabajo experimental incluye la caracterización de los sistemas mediante ensayos de rayado y nanoindentación y la evaluación de las curvas tensión-deformación de indentación esférica de los sustratos, tanto desnudos como recubiertos, poniendo especial atención en determinar las tensiones de contacto críticas asociadas a la deformación plástica y a la aparición de grietas circulares en la superficie recubierta. A este estudio, le siguen numerosos ensayos a fatiga a cargas inferiores a aquéllas identificadas como críticas bajo carga monotónica y para un número de ciclos comprendido entre 1.000 y 1.000.000 de ciclos. Los resultados experimentales indican que las películas cerámicas no parecen desempeñar un papel relevante en la aparición de la cedencia plástica, siendo la deformación plástica global controlada por la deformación del sustrato. No obstante, para tensiones elevadas de indentación durante el régimen plástico, existe la aparición de grietas circulares en los recubrimientos cerámicos. Además, la aparición de las mismas es sensible a la fatiga por contacto. Este análisis mecánico se complementa con una inspección detallada del daño generado en profundidad y superficie.

Study of the influence of grain size and precipitates on the electromagnetic losses in different grades of non-oriented fully processed electrical steel

The study was performed in the installations of OCAS, a Steel Research Centre of ArcelorMittal. Taking M32 steel (3.25%Si+0.9%Al) as the basis chemical composition and three different thicknesses (0.35, 0.5 and 0.65mm), different annealing conditions (temperature and time) have been applied in the laboratory simulator at St. Chély, France. The aim was to link annealing parameters, grain size and energy loss. It was determined the optimum annealing parameters to reach the lowest power losses for three different grades of non-oriented fully processed electrical steel. In addition, M250-50 samples having different magnetic behaviour (high and low losses) but the same grain size and texture, have been analyzed in terms of TEM observations of their precipitates, in the University of Marseille. The results reveal that a high amount of medium and big precipitates (&10 nm) worsen the magnetic properties of the material. The small precipitates (&10nm) do not have a strong influence on the magnetic properties. The presence of precipitates can have a great influence on the power losses and further work is clearly necessary.

Link between microstructure and properties in new metallurgical concepts for very low loss non-oriented electrical steel

The influence of chemistry and soaking temperature (maximal temperature of the continuous annealing) on the final properties of non-oriented electrical steels has been studied. With this objective two different studies have been performed. First the Mn, Ni and Cr content of a low loss electrical steel composition has been modified. An intermediate content and a high content of each element has been added in order to study the influence of this components on the magnetic looses, grain size and texture. Secondly the influence of the soaking temperature on magnetic properties, grain size and oxidation in four grades of non-oriented electrical steels (Steel A, B, C and D) was studied.

Diversity of Vibrionaceae bacteria isolated from the haemolymph of the spider crab Maja brachydactyla

Aims: The aim of this study was to characterise and identify vibrios isolated from the haemolymph of apparently healthy adult spider crabs (Maja brachydactyla) wild-caught in the Spanish localities of Galician coast and in the Canary Islands and also from captive animals held at IRTA’s facilities in the Ebro Delta of Catalonia, north-west Spanish Mediterranean coast. Methods and Results: A total of 277 bacterial isolates were obtained, and of these, 171 were characterised with rep-PCR, resulting electrophoretic bands were analysed and clusters formed. Identification of representative strains of each cluster was made by sequencing the 16S rRNA. Samples from animals caught in Galicia and captive at IRTA (around 15–18 C) rendered mostly species belonging to the Splendidus clade (72Æ2 and 76Æ6% respectively), commonly found in cold waters (below 20 C). Higher species diversity was found in the haemolymph of the captive animals. In the warmer Canary Islands waters (around 21 C), the diversity of vibrios is dominated by three clades, Harveyi (Vibrio core group, 39Æ3%), Orientalis (23Æ2%) and Splendidus (21Æ4%) with a species diversity that equals that of the colder captive animals. Conclusions: Differences in the vibrios populations were found in the haemolymph extracted from animals collected from the three localities. Potential new species were found, and their description is under way. Significance and Impact of Study: As with other invertebrates, spider crabs also contain a diverse population of vibrios. These findings should help researchers to diagnose when a crab is infected.

Efecte de la recurrència dels incendis sobre la vegetació i el sòl a les zones de matollar del Macizo Central Ourensano

El matollar sec europeu format per Erica australis, Erica arborea, Pterosparum tridentatum, Halimium lasianthum i Calluna vulgaris com a espècies predominants és cremat en les serralades del Massís Central de forma repetida durant el pas dels anys. Això ha sigut, tradicionalment, a causa de la necessitat de mantenir-lo transitable per al bestiar, encara que altres circumstàncies s’han afegit actualment a aquesta necessitat, que incrementen el risc d’incendi d’aquesta comunitat, disparant-se el número d’incendis en els últims 30 anys. Sabent això, vam decidir realitzar un estudi a les zones de matollar que trobem al Massís Central situat a la zona del Concello de Villariño de Conso, a Ourense, per conèixer com es comporten les espècies característiques d’aquest tipus d’ecosistema després dels incendis, mitjançant la realització de mostrejos i perfils del sòl. D’aquesta manera hem volgut veure com es desenvolupen les espècies vegetals de matollar al llarg del temps, després de ser cremats. Gràcies a l’estudi hem pogut veure com el matollar observat te unes característiques que li permet sobreviure als incendis i tindre una capacitat de regeneració elevada després de patir aquesta pertorbació. Això es degut a la capacitat per rebrotar d’aquestes espècies arbustives i a la seva competitivitat. També hem vist com a necessari, donar un valor econòmic a la bona conservació de l’hàbitat, per tal de que la població local abandoni pràctiques de gestió forestal nocives, com el foc.

The DART classification of unannotated transcription within the ENCODE regions: associating transcription with known and novel loci

For the ∼1% of the human genome in the ENCODE regions, only about half of the transcriptionally active regions (TARs) identified with tiling microarrays correspond to annotated exons. Here we categorize this large amount of “unannotated transcription.” We use a number of disparate features to classify the 6988 novel TARs—array expression profiles across cell lines and conditions, sequence composition, phylogenetic profiles (presence/absence of syntenic conservation across 17 species), and locations relative to genes. In the classification, we first filter out TARs with unusual sequence composition and those likely resulting from cross-hybridization. We then associate some of those remaining with proximal exons having correlated expression profiles. Finally, we cluster unclassified TARs into putative novel loci, based on similar expression and phylogenetic profiles. To encapsulate our classification, we construct a Database of Active Regions and Tools (DART.gersteinlab.org). DART has special facilities for rapidly handling and comparing many sets of TARs and their heterogeneous features, synchronizing across builds, and interfacing with other resources. Overall, we find that ∼14% of the novel TARs can be associated with known genes, while ∼21% can be clustered into ∼200 novel loci. We observe that TARs associated with genes are enriched in the potential to form structural RNAs and many novel TAR clusters are associated with nearby promoters. To benchmark our classification, we design a set of experiments for testing the connectivity of novel TARs. Overall, we find that 18 of the 46 connections tested validate by RT-PCR and four of five sequenced PCR products confirm connectivity unambiguously.

Hot vs. cold: Sequential responses and preference stability in experimental games

In experiments with two-person sequential games we analyzewhether responses to favorable and unfavorable actions dependon the elicitation procedure. In our hot treatment thesecond player responds to the first player s observed actionwhile in our cold treatment we follow the strategy method and have the second player decide on a contingent action foreach and every possible first player move, without firstobserving this move. Our analysis centers on the degree towhich subjects deviate from the maximization of their pecuniaryrewards, as a response to others actions. Our results show nodifference in behavior between the two treatments. We also findevidence of the stability of subjects preferences with respectto their behavior over time and to the consistency of theirchoices as first and second mover.

Testing the descriptive performance of the rank-dependent utility in the domain of health profiles

Expected utility theory (EUT) has been challenged as a descriptive theoryin many contexts. The medical decision analysis context is not an exception.Several researchers have suggested that rank dependent utility theory (RDUT)may accurately describe how people evaluate alternative medical treatments.Recent research in this domain has addressed a relevant feature of RDU models-probability weighting-but to date no direct test of this theoryhas been made. This paper provides a test of the main axiomatic differencebetween EUT and RDUT when health profiles are used as outcomes of riskytreatments. Overall, EU best described the data. However, evidence on theediting and cancellation operation hypothesized in Prospect Theory andCumulative Prospect Theory was apparent in our study. we found that RDUoutperformed EU in the presentation of the risky treatment pairs in whichthe common outcome was not obvious. The influence of framing effects onthe performance of RDU and their importance as a topic for future researchis discussed.