Meat quality of ten cattle breeds of the Southwest of Europe

A sample of about 70 young bulls of each of ten beef cattle breeds reared in their typical production systems has been characterised with respect to meat quality traits. Breeds included were Asturiana de los Valles, Asturiana de la Montaña, Avileña-Negra Ibérica, Bruna dels Pirineus, Morucha, Pirenaica and Retinta from Spain, and Aubrac, Gasconne and Salers from France. As was previously showed regarding carcass traits, there exist large differences both between and within breed – systems. In general, rustic breeds tended to present darker and redder meats with higher haematin contents, whereas less precocious and more specialised breeds showed brighter meats with bigger water losses. Protein content was similar, whereas intramuscular fat presented the larger variations both between and within breeds. ICDH content was higher in the more rustic breeds, showing the predominantly oxidative character of their fibres. Texture measurements showed in general large within breed-system variations, the differences between breeds being less evident. Within breed-system, daily gain weight was positively associated with brighter and tender meats. In the range studied, increasing slaughter weight within breed did not have influence on meat quality. Conformation was related to lower water holding capacity and less dry matter and intramuscular fat, as well as to a lower haematin content giving brighter meats. The increase in fatness scores was related to an augment of toughness in meat specialised breeds, although in Avileña-Negra Ibérica breed fatness carcasses were related to more tender meats. Redness parameter a* was positively related to fatter animals and opposed to conformation, the opposite being true for the L* (lightness) parameter. There was a small trend of fatter carcasses to be related to oxidative fibres, whereas the muscular fibres of the more conformed carcasses were more glycolytic. Texture measurements maximum load, maximum stress and toughness were very closely related. Shear force was opposed to tenderness. Losses at cooking were opposed to juiciness, but only in the Spanish breeds. No consistent trends regarding relationships between carcass characteristics and tenderness could be observed. Overall acceptability was primarily related with tenderness and flavour, and later on juiciness.

Production and carcass quality of ten beef cattle breeds of the southwest of Europe

A sample of about 70 young bulls of each of ten beef cattle breeds reared in their typical production systems has been studied regarding growth and carcass quality traits. Breeds included were Asturiana de los Valles (AV), Asturiana de la Montaña (AM), Avileña-Negra Ibérica (A-NI), Bruna dels Pirineus (BP), Morucha (Mo), Pirenaica (Pi) and Retinta (Re) from Spain, and Aubrac (Au), Gasconne (Ga) and Salers (Sal) from France. There existed large differences between breeds and also within breeds. AV and Pi were the breeds with more muscle and less fat, whereas A-NI, Mo and Re were in the opposite side. BP and AM occupied an intermediate position. This allows to classify the Spanish breeds in three groups: AV and Pi would belong to the group of late maturity, A-NI, Mo and Re, would be early maturing breeds, whereas BP and AM, despite the small size of the last, will be of intermediate maturity. In the French populations, Au was the breed with the highest carcass weight and Ga exhibited the lowest. Sal occupied an intermediate position, showing the longer and thinner thigh. In a wide range of carcass weight, the general relationships among carcass traits have been confirmed. Animals with the better conformation were also the leaner and longer carcasses tended to be lowly associated with a poorer conformation and fatter carcasses. Bone content was clearly opposed to carcass conformation and muscle content and was associated with longer carcasses

II Workshop on the use of Computed Tomography (CT) in pig carcass classification. Other CT applications: live animals and meat technology, 16-17th April 2009, Monells (Girona), Spain

Es va realitzar el II Workshop en Tomografia Computeritzada (TC) a Monells. El primer dia es va dedicar íntegrament a la utilització del TC en temes de classificació de canals porcines, i el segon dia es va obrir a altres aplicacions del TC, ja sigui en animals vius o en diferents aspectes de qualitat de la carn o els productes carnis. Al workshop hi van assistir 45 persones de 12 països de la UE. The II workshop on the use of Computed Tomography (CT) in pig carcass classification. Other CT applications: live animals and meat technology was held in Monells. The first day it was dedicated to the use of CT in pig carcass classification. The segond day it was open to otehr CT applications, in live animals or in meat and meat products quality. There were 45 assistants of 12 EU countries.

Finiteness obstructions and Euler characteristics of categories

"Vegeu el resum a l'inici del document del fitxer adjunt."

Parental education and family characteristics: educational opportunities across cohorts in Italy and Spain

Drawing on data contained in the 2005 EU-SILC, this paper investigates the disparities in educational opportunities in Italy and Spain. Its main objective is to analyse the predicted probabilities of successfully completing upper-secondary and tertiary education for individuals with different parental backgrounds, and the changes in these probabilities across birth cohorts extending from 1940 to 1980. The results suggest that the disparities in tertiary education opportunities in Italy tend to increase over time. By contrast, the gap in educational opportunity in Spain shows a marked decrease across the cohorts. Moreover, by using an intuitive decomposition strategy, the paper shows that a large part of the educational gap between individuals of different backgrounds is “composed” of the difference in the endowment of family characteristics. Specifically, it seems that more highly educated parents are more able to endow their children with a better composition of family characteristics, which accounts for a significant proportion of the disparities in educational opportunity.

Euler characteristics of categories and homotopy colimits

"Vegeu el resum a l'inici del document del fitxer adjunt."

Age effects, unobserved characteristics and hedonic price indexes: The Spanish car market in the 1990s

This paper computes and compares alternative quality-adjusted price indexes for new cars in Spain in the period 1990-2000. The proposed hedonic approach simultaneously controls for time-invariant unobserved product e¤ects and time-variant unobserved quality changes, that are assumed to be captured by model age effects. The results show that the non-adjusted price index largely overstates the increase in the cost of living induced by changes in car prices and that previous evidence for this market have not measured the real extent of that bias, probably due to the omission of controls for unobservables. It is also shown that omitting age effects can also lead to misleading conclusions. The estimated price indexes give also some insights on what could have been the determinants of price evolution in the Spanish car market.

Age effects, unobserved characteristics and hedonic price indexes: The Spanish car market in the 1990's

This paper computes and compares alternative quality-adjusted price indexes for new cars in Spain in the period 1990-2000. The proposed hedonic approach simultaneously controls for time-invariant unobserved product effects and time-variant unobserved quality changes, that are assumed to be captured by model age effects. The results show that the non-adjusted price index largely overstates the increase in the cost of living induced by changes in car prices and that previous evidence for this market have not measured the real extent of that bias, probably due to the omission of controls for unobservables. It is also shown that omitting age effects can also lead to misleading conclusions. The estimated price indexes give also some insights on what could have been the determinants of price evolution in the Spanish car market. JEL classi…fication numbers: C43, E31, L11, L13, Keywords: Hedonic price indexes, Spanish car market, car prices, CPI, Cost of living

Mesophyll conductance to CO2 and leaf morphological characteristics under drought stress during Quercus ilex L resprouting

• Quercus ilex L., the dominant species in Mediterranean forests and one with a great capacity for resprouting after disturbances, is threatened by the expected increase in fire frequency and drought associated with climate change. • The aim of this study was to determine the contribution of photosynthesis limitants, especially mesophyll conductance (gmes ) during this species’ resprouting and under summer drought. • Resprouts showed 5.3-fold increased gmes and 3.8-fold increased stomatal conductance (gs) atmidday with respect to leaves of undisturbed individuals. With increased drought, structural changes (decreased density and increased thickness) in resprouts contributed to the observed higher photosynthesis and increased gmes. However, gmes only partially depended on leaf structure, and was also under physiological control. Resprouts also showed lower non-stomatal limitations (around 50% higher carboxylation velocity (Vc,max) and capacity for ribulose-1,5-bisphosphate regeneration (Jmax)). A significant contribution of gmes to leaf carbon isotope discrimination values was observed. • gmes exhibits a dominant role in photosynthesis limitation in Q. ilex and is regulated by factors other than morphology. During resprouting after disturbances, greater capacity to withstand drought, as evidenced by higher gmes , gs and lower non-stomatal limitants, enables increased photosynthesis and rapid growth.

Characteristics of the cornea and ocular surface in patients with congenital aniridia

We performed complete eye exams on 50 eyes in 25 patients with congenital aniridia. Factors such as age, history of ocular surgery, dry eye score and aesthesiometry results correlated with the degree of aniridia-related keratopathy. Schirmer’s test I in 86.8%, Schirmer’s test II in 94.4% and TFBUT in 83.3% of cases were all normal. Corneal staining was altered in 54.2%, and conjunctival staining was altered in 45.7%. The tear ferning pattern was abnormal in 80%. Conjunctival metaplasia was present in 76.9%.Corneal endothelial cell density was normal. Ultrasonic pachymetry was higher than average in all eyes examined.

Social Determinants of Child Health in Colombia: Can Community Education Moderate the Effect of Family Characteristics?

Contextual effects on child health have been investigated extensively in previous research. However, few studies have considered the interplay between community characteristics and individual-level variables. This study examines the influence of community education and family socioeconomic characteristics on child health (as measured by height and weight-for-age Z-scores), as well as their interactions. We adapted the Commission on Social Determinants of Health (CSDH) framework to the context of child health. Using data from the 2010 Colombian Demographic and Health Survey (DHS), weighted multilevel models are fitted since the data are not self-weighting. The results show a positive impact of the level of education of other women in the community on child health, even after controlling for individual and family socioeconomic characteristics. Different pathways through which community education can substitute for the effect of family characteristics on child nutrition are found. The interaction terms highlight the importance of community education as a moderator of the impact of the mother’s own education and autonomy, on child health. In addition, the results reveal differences between height and weight-for-age indicators in their responsiveness to individual and contextual factors. Our findings suggest that community intervention programmes may have differential effects on child health. Therefore, their identification can contribute to a better targeting of child care policies.

Tensile strength characteristics of polypropylene composites reinforced with stone groundwood fibers from softwood

The behavior of stone groundwood / polypropylene injection-molded composites was evaluated with and without coupling agent. Stone groundwood (SGW) is a fibrous material commonly prepared in a high yield process and mainly used for papermaking applications. In this work, the use of SGW fibers was explored as a reinforcing element of polypropylene (PP) composites. The surface charge density of the composite components was evaluated, as well as the fiber’s length and diameter inside the composite material. Two mixing extrusion processes were evaluated, and the use of a kinetic mixer, instead of an internal mixer, resulted in longer mean fiber lengths of the reinforcing fibers. On the other hand, the accessibility of surface hydroxyl groups of stone groundwood fibers was improved by treating the fibers with 5% of sodium hydroxide, resulting in a noticeable increase of the tensile strength of the composites, for a similar percentage of coupling agent. A new parameter called Fiber Tensile Strength Factor is defined and used as a baseline for the comparison of the properties of the different composite materials. Finally the competitiveness of stone groundwood / polypropylene / polypropylene-co-maleic anhydride system, which compared favorably to sized glass-fiber / polypropylene GF/PP and glass-fiber / polypropylene / polypropylene-co-maleic anhydride composite formulations, was quantified by means of the fiber tensile strength factor

Gender inequality in health among elderly people in a combined framework of socioeconomic position, family characteristics and social support

This study analyses gender inequalities in health among elderly people in Catalonia (Spain) by adopting a conceptual framework that globally considers three dimensions of health determinants : socio-economic position, family characteristics and social support. Data came from the 2006 Catalonian Health Survey. For the purposes of this study a sub-sample of people aged 65–85 years with no paid job was selected (1,113 men and 1,484 women). The health outcomes analysed were self-perceived health status, poor mental health status and long-standing limiting illness. Multiple logistic regression models separated by sex were fitted and a hierarchical model was fitted in three steps. Health status among elderly women was poorer than among the men for the three outcomes analysed. Whereas living with disabled people was positively related to the three health outcomes and confidant social support was negatively associated with all of them in both sexes, there were gender differences in other social determinants of health. Our results emphasise the importance of using an integrated approach for the analysis of health inequalities among elderly people, simultaneously considering socio-economic position, family characteristics and social support, as well as different health indicators, in order fully to understand the social determinants of the health status of older men and women.

An investigation of the relationship between job characteristics and the gender wage gap

This paper re-examines gender wage differences, taking into account notonly worker characteristics but also job characteristics. Considerationof a wide set of job quality indicators can explain a fraction of thewage gap that would otherwise be attributed to pure wage discrimination.In any case, the fraction of the wage gap that remains associated todifferential rewards for identical factors across sexes is stillsubstantial. Our results suggest that in order to avoid overestimationof the fraction of the wage gap attributable to discrimination, it isnecessary to control for job characteristics.

Estimating cross-industry cross-country models using benchmark industry characteristics

International industry data permits testing whether the industry-specific impact of cross-countrydifferences in institutions or policies is consistent with economic theory. Empirical implementationrequires specifying the industry characteristics that determine impact strength. Most of the literature has been using US proxies of the relevant industry characteristics. We show that usingindustry characteristics in a benchmark country as a proxy of the relevant industry characteristicscan result in an attenuation bias or an amplification bias. We also describe circumstances allowingfor an alternative approach that yields consistent estimates. As an application, we reexamine theinfluential conjecture that financial development facilitates the reallocation of capital from decliningto expanding industries.