New approximation to the third-order density : application to the calculation of correlated multicenter indices

In this work we present the formulas for the calculation of exact three-center electron sharing indices (3c-ESI) and introduce two new approximate expressions for correlated wave functions. The 3c-ESI uses the third-order density, the diagonal of the third-order reduced density matrix, but the approximations suggested in this work only involve natural orbitals and occupancies. In addition, the first calculations of 3c-ESI using Valdemoro's, Nakatsuji's and Mazziotti's approximation for the third-order reduced density matrix are also presented for comparison. Our results on a test set of molecules, including 32 3c-ESI values, prove that the new approximation based on the cubic root of natural occupancies performs the best, yielding absolute errors below 0.07 and an average absolute error of 0.015. Furthemore, this approximation seems to be rather insensitive to the amount of electron correlation present in the system. This newly developed methodology provides a computational inexpensive method to calculate 3c-ESI from correlated wave functions and opens new avenues to approximate high-order reduced density matrices in other contexts, such as the contracted Schrödinger equation and the anti-Hermitian contracted Schrödinger equation

A Methodology to measure shareholder value orientation and shareholder value creation aimed at providing a research basis to investigate the link between both magnitudes

Does shareholder value orientation lead to shareholder value creation? This article proposes methods to quantify both, shareholder value orientation and shareholder value creation. Through the application of these models it is possible to quantify both dimensions and examine statistically in how far shareholder value orientation explains shareholder value creation. The scoring model developed in this paper allows quantifying the orientation of managers towards the objective to maximize wealth of shareholders. The method evaluates information that comes from the companies and scores the value orientation in a scale from 0 to 10 points. Analytically the variable value orientation is operationalized expressing it as the general attitude of managers toward the objective of value creation, investment policy and behavior, flexibility and further eight value drivers. The value creation model works with market data such as stock prices and dividend payments. Both methods where applied to a sample of 38 blue chip companies: 32 firms belonged to the share index IBEX 35 on July 1st, 1999, one company represents the “new economy” listed in the Spanish New Market as per July 1st, 2001, and 5 European multinational groups formed part of the EuroStoxx 50 index also on July 1st, 2001. The research period comprised the financial years 1998, 1999, and 2000. A regression analysis showed that between 15.9% and 23.4% of shareholder value creation can be explained by shareholder value orientation.

Applying RADIC in Open MPI: the methodology used to implement RADIC over a Message Passing Library

Fault tolerance has become a major issue for computer and software engineers because the occurrence of faults increases the cost of using a parallel computer. RADIC is the fault tolerance architecture for message passing systems which is transparent, decentralized, flexible and scalable. This master thesis presents the methodology used to implement the RADIC architecture over Open MPI, a well-know large-used message passing library. This implementation kept the RADIC architecture characteristics. In order to validate the implementation we have executed a synthetic ping program, besides, to evaluate the implementation performance we have used the NAS Parallel Benchmarks. The results prove that the RADIC architecture performance depends on the communication pattern of the parallel application which is running. Furthermore, our implementation proves that the RADIC architecture could be implemented over an existent message passing library.

Calculation of the variance in surveys of the economic climate

Public opinion surveys have become progressively incorporated into systems of official statistics. Surveys of the economic climate are usually qualitative because they collect opinions of businesspeople and/or experts about the long-term indicators described by a number of variables. In such cases the responses are expressed in ordinal numbers, that is, the respondents verbally report, for example, whether during a given trimester the sales or the new orders have increased, decreased or remained the same as in the previous trimester. These data allow to calculate the percent of respondents in the total population (results are extrapolated), who select every one of the three options. Data are often presented in the form of an index calculated as the difference between the percent of those who claim that a given variable has improved in value and of those who claim that it has deteriorated. As in any survey conducted on a sample the question of the measurement of the sample error of the results has to be addressed, since the error influences both the reliability of the results and the calculation of the sample size adequate for a desired confidence interval. The results presented here are based on data from the Survey of the Business Climate (Encuesta de Clima Empresarial) developed through the collaboration of the Statistical Institute of Catalonia (Institut d’Estadística de Catalunya) with the Chambers of Commerce (Cámaras de Comercio) of Sabadell and Terrassa.

Balanç de carbó atmosfèric: raó entre les emissions de metà de les vaques i el segrest forestal de CO2

Treball de recerca realitzat per un alumne d'ensenyament secundari i guardonat amb un Premi CIRIT per fomentar l'esperit científic del Jovent l'any 2009. L’objectiu d’aquest treball és determinar la capacitat de segrest de CO2 d’un bosc dels Pirineus, per tal de reduir el seu efecte hivernacle, en relació a l’impacte climàtic que tindrien les emissions de metà de les vaques. La metodologia s’ha basat en estimar la producció de fusta a partir d’inventaris forestals d’un bosc del Pallars Sobirà, i calcular-ne el segrest de CO2. Per altra banda, s’ha estimat bibliogràficament les emissions de metà d’una vaca. A partir de factors de conversió s’ha estimat la superfície de bosc que compensaria l’efecte hivernacle de les emissions de metà d’una vaca durant un any. El valor obtingut és de 0,727 hectàrees de bosc per vaca i any. Amb aquest valor s’ha estimat la superfície de bosc necessària per compensar les emissions de metà de la població de vaques de Catalunya. Aquests resultats són aproximats, donades les diferències en el creixement dels boscos de Catalunya. Aquest estudi dóna una dada comprensible que posa de manifest el concepte de balanç de carboni i els diferents elements que el formen.

Development of an optimized methodology for tensile testing of carbon steels in hydrogen environment

The study was performed at OCAS, the Steel Research Centre of ArcelorMittal for the Industry market. The major aim of this research was to obtain an optimized tensile testing methodology with in-situ H-charging to reveal the hydrogen embrittlement in various high strength steels. The second aim of this study has been the mechanical characterization of the hydrogen effect on hight strength carbon steels with varying microstructure, i.e. ferrite-martensite and ferrite-bainite grades. The optimal parameters for H-charging - which influence the tensile test results (sample geometry type of electrolyte, charging methods effect of steel type, etc.) - were defined and applied to Slow Strain Rate testing, Incremental Step Loading and Constant Load Testing. To better understand the initiation and propagation of cracks during tensile testing with in-situ H-charging, and to make the correlation with crystallographic orientation, some materials have been analyzed in the SEM in combination with the EBSD technique. The introduction of a notch on the tensile samples permits to reach a significantly improved reproducibility of the results. Comparing the various steel grades reveals that Dual Phase (ferrite-martensite) steels are more sensitive to hydrogen induced cracking than the FB (ferritic-bainitic) ones. This higher sensitivity to hydrogen was found back in the reduced failure times, increased creep rates and enhanced crack initiation (SEM) for the Dual Phase steels in comparison with the FB steels.

Reconsideration of dimensions and curve fitting practice in economics ellaborating on Georgescu-Roegen’s economic methodology

This paper is to examine the proper use of dimensions and curve fitting practices elaborating on Georgescu-Roegen’s economic methodology in relation to the three main concerns of his epistemological orientation. Section 2 introduces two critical issues in relation to dimensions and curve fitting practices in economics in view of Georgescu-Roegen’s economic methodology. Section 3 deals with the logarithmic function (ln z) and shows that z must be a dimensionless pure number, otherwise it is nonsensical. Several unfortunate examples of this analytical error are presented including macroeconomic data analysis conducted by a representative figure in this field. Section 4 deals with the standard Cobb-Douglas function. It is shown that the operational meaning cannot be obtained for capital or labor within the Cobb-Douglas function. Section 4 also deals with economists "curve fitting fetishism". Section 5 concludes thispaper with several epistemological issues in relation to dimensions and curve fitting practices in economics.

Consumer populations and nutritional transition in Spain in the 20th century: a methodology for their reconstruction

One feature of the modern nutrition transition is the growing consumption of animal proteins. The most common approach in the quantitative analysis of this change used to be the study of averages of food consumption. But this kind of analysis seems to be incomplete without the knowledge of the number of consumers. Data about consumers are not usually published in historical statistics. This article introduces a methodological approach for reconstructing consumer populations. This methodology is based on some assumptions about the diffusion process of foodstuffs and the modeling of consumption patterns with a log-normal distribution. This estimating process is illustrated with the specific case of milk consumption in Spain between 1925 and 1981. These results fit quite well with other data and indirect sources available showing that this dietary change was a slow and late process. The reconstruction of consumer population could shed a new light in the study of nutritional transitions.

Validador de políticas de acceso abierto

MELIBEA és un directori i validador de polítiques en favor de l'accés obert a la producció científico-acadèmica. Com a directori, descriu les polítiques institucionals existents relacionades amb l'accés obert (AO) a la producció científica i acadèmica. Com a validador, les sotmet a una anàlisi qualitatiu i quantitatiu basat en el compliment d'un conjunt d'indicadors que reflecteixen les bases en què es fonamenta una política institucional. El validador indica una puntuació i un percentatge de compliment per a cada una de les polítiques analitzades. Això es realitza a partir dels valors assignats a certs indicadors i la seva ponderació en funció de la seva importància relativa. La suma dels valors ponderats de cadascun dels indicadors s'ajusta a una escala percentual i condueix al que hem anomenat "Percentatge validat d'accés obert", el càlcul del qual s'exposa en l'apartat de Metodologia. Els tipus d'institucions que s'analitzen són universitats, centres de recerca, agències finançadores i organitzacions governamentals.

An hybrid methodology for RL-based behavior coordination in a target following mission with an AUV

Proposes a behavior-based scheme for high-level control of autonomous underwater vehicles (AUVs). Two main characteristics can be highlighted in the control scheme. Behavior coordination is done through a hybrid methodology, which takes in advantages of the robustness and modularity in competitive approaches, as well as optimized trajectories

A system to evaluate the accuracy of a visual mosaicking methodology

When underwater vehicles navigate close to the ocean floor, computer vision techniques can be applied to obtain motion estimates. A complete system to create visual mosaics of the seabed is described in this paper. Unfortunately, the accuracy of the constructed mosaic is difficult to evaluate. The use of a laboratory setup to obtain an accurate error measurement is proposed. The system consists on a robot arm carrying a downward looking camera. A pattern formed by a white background and a matrix of black dots uniformly distributed along the surveyed scene is used to find the exact image registration parameters. When the robot executes a trajectory (simulating the motion of a submersible), an image sequence is acquired by the camera. The estimated motion computed from the encoders of the robot is refined by detecting, to subpixel accuracy, the black dots of the image sequence, and computing the 2D projective transform which relates two consecutive images. The pattern is then substituted by a poster of the sea floor and the trajectory is executed again, acquiring the image sequence used to test the accuracy of the mosaicking system

Comparison studies of tin deposits (Priamurye, Russia) using the Aitchison’s methodology

A study of tin deposits from Priamurye (Russia) is performed to analyze the differencesbetween them based on their origin and also on commercial criteria. A particularanalysis based on their vertical zonality is also given for samples from Solnechnoedeposit. All the statistical analysis are made on the subcomposition formed by seventrace elements in cassiterite (In, Sc, Be, W, Nb, Ti and V) using the Aitchison’methodology of analysis of compositional data

Fast calculation of the CAC convolution algorithm using the multinomial distribution function

The authors focus on one of the methods for connection acceptance control (CAC) in an ATM network: the convolution approach. With the aim of reducing the cost in terms of calculation and storage requirements, they propose the use of the multinomial distribution function. This permits direct computation of the associated probabilities of the instantaneous bandwidth requirements. This in turn makes possible a simple deconvolution process. Moreover, under certain conditions additional improvements may be achieved

A Novel Breast Tissue Density Classification Methodology

It has been shown that the accuracy of mammographic abnormality detection methods is strongly dependent on the breast tissue characteristics, where a dense breast drastically reduces detection sensitivity. In addition, breast tissue density is widely accepted to be an important risk indicator for the development of breast cancer. Here, we describe the development of an automatic breast tissue classification methodology, which can be summarized in a number of distinct steps: 1) the segmentation of the breast area into fatty versus dense mammographic tissue; 2) the extraction of morphological and texture features from the segmented breast areas; and 3) the use of a Bayesian combination of a number of classifiers. The evaluation, based on a large number of cases from two different mammographic data sets, shows a strong correlation ( and 0.67 for the two data sets) between automatic and expert-based Breast Imaging Reporting and Data System mammographic density assessment

Modification of the Perrine-Baum diagram to improve the calculation of high voltage electric lines

Through the history of Electrical Engineering education, vectorial and phasorial diagrams have been used as a fundamental learning tool. At present, computational power has replaced them by long data lists, the result of solving equation systems by means of numerical methods. In this sense, diagrams have been shifted to an academic background and although theoretically explained, they are not used in a practical way within specific examples. This fact may be against the understanding of the complex behavior of the electrical power systems by students. This article proposes a modification of the classical Perrine-Baum diagram construction to allowing both a more practical representation and a better understanding of the behavior of a high-voltage electric line under different levels of load. This modification allows, at the same time, the forecast of the obsolescence of this behavior and line’s loading capacity. Complementary, we evaluate the impact of this tool in the learning process showing comparative undergraduate results during three academic years