Modelling the cooling of concrete by piped water

Piped water is used to remove hydration heat from concrete blocks during construction. In this paper we develop an approximate model for this process. The problem reduces to solving a one-dimensional heat equation in the concrete, coupled with a first order differential equation for the water temperature. Numerical results are presented and the effect of varying model parameters shown. An analytical solution is also provided for a steady-state constant heat generationmodel. This helps highlight the dependence on certain parameters and can therefore provide an aid in the design of cooling systems.

An Interval Intelligent-based Approach for Fault Detection and Modelling

Not considered in the analytical model of the plant, uncertainties always dramatically decrease the performance of the fault detection task in the practice. To cope better with this prevalent problem, in this paper we develop a methodology using Modal Interval Analysis which takes into account those uncertainties in the plant model. A fault detection method is developed based on this model which is quite robust to uncertainty and results in no false alarm. As soon as a fault is detected, an ANFIS model is trained in online to capture the major behavior of the occurred fault which can be used for fault accommodation. The simulation results understandably demonstrate the capability of the proposed method for accomplishing both tasks appropriately

Modelling diffusion of innovations in a social network

A simple model of diffusion of innovations in a social network with upgrading costs is introduced. Agents are characterized by a single real variable, their technological level. According to local information, agents decide whether to upgrade their level or not, balancing their possible benefit with the upgrading cost. A critical point where technological avalanches display a power-law behavior is also found. This critical point is characterized by a macroscopic observable that turns out to optimize technological growth in the stationary state. Analytical results supporting our findings are found for the globally coupled case.

Locations and Relocations:Modelling, Determinants, and Interrelations

Empirical studies on industrial location do not typically distinguish between new and relocated establishments. This paper addresses this shortcoming using data on the frequency of these events in municipalities of the same economic-administrative region. This enables us to test not only for differences in their determinants but also for interrelations between start-ups and relocations. Estimates from count regression models for cross-section and panel data show that, although partial effects differ, common patterns arise in “institutional” and “neoclassical” explanatory factors. Also, start-ups and relocations are positive but asymmetrically related. JEL classification: C25, R30, R10. Keywords: cities, count data models, industrial location

Individual-based modelling of bacterial cultures to study the lag ohase

Els bacteris són la forma dominant de vida del planeta: poden sobreviure en medis molt adversos, i en alguns casos poden generar substàncies que quan les ingerim ens són tòxiques. La seva presència en els aliments fa que la microbiologia predictiva sigui un camp imprescindible en la microbiologia dels aliments per garantir la seguretat alimentària. Un cultiu bacterià pot passar per quatre fases de creixement: latència, exponencial, estacionària i de mort. En aquest treball s’ha avançat en la comprensió dels fenòmens intrínsecs a la fase de latència, que és de gran interès en l’àmbit de la microbiologia predictiva. Aquest estudi, realitzat al llarg de quatre anys, s’ha abordat des de la metodologia Individual-based Modelling (IbM) amb el simulador INDISIM (INDividual DIScrete SIMulation), que ha estat millorat per poder fer-ho. INDISIM ha permès estudiar dues causes de la fase de latència de forma separada, i abordar l’estudi del comportament del cultiu des d’una perspectiva mesoscòpica. S’ha vist que la fase de latència ha de ser estudiada com un procés dinàmic, i no definida per un paràmetre. L’estudi de l’evolució de variables com la distribució de propietats individuals entre la població (per exemple, la distribució de masses) o la velocitat de creixement, han permès distingir dues etapes en la fase de latència, inicial i de transició, i aprofundir en la comprensió del que passa a nivell cel•lular. S’han observat experimentalment amb citometria de flux diversos resultats previstos per les simulacions. La coincidència entre simulacions i experiments no és trivial ni casual: el sistema estudiat és un sistema complex, i per tant la coincidència del comportament al llarg del temps de diversos paràmetres interrelacionats és un aval a la metodologia emprada en les simulacions. Es pot afirmar, doncs, que s’ha verificat experimentalment la bondat de la metodologia INDISIM.

Empirical studies in industrial location: an assessment of their methods and results

This paper surveys recent evidence on the determinants of (national and/or foreign) industrial location. We find that the basic analytical framework has remained essentially unaltered since the early contributions of the early 1980's while, in contrast, there have been significant advances in the quality of the data and, to a lesser extent, the econometric modelling. We also identify certain determinants (neoclassical and institutional factors) that tend to provide largely consistent results across the reviewed studies. In light of this evidence, we finally suggest future lines of research.

Modelling of bird distribution under complex mediterranean landscape dynamics: open habitat birds and fire (MEDFIRE)

Report for the scientific sojourn at the Simon Fraser University, Canada, from July to September 2007. General context: landscape change during the last years is having significant impacts on biodiversity in many Mediterranean areas. Land abandonment, urbanisation and specially fire are profoundly transforming large areas in the Western Mediterranean basin and we know little on how these changes influence species distribution and in particular how these species will respond to further change in a context of global change including climate. General objectives: integrate landscape and population dynamics models in a platform allowing capturing species distribution responses to landscape changes and assessing impact on species distribution of different scenarios of further change. Specific objective 1: develop a landscape dynamic model capturing fire and forest succession dynamics in Catalonia and linked to a stochastic landscape occupancy (SLOM) (or spatially explicit population, SEPM) model for the Ortolan bunting, a species strongly linked to fire related habitat in the region. Predictions from the occupancy or spatially explicit population Ortolan bunting model (SEPM) should be evaluated using data from the DINDIS database. This database tracks bird colonisation of recently burnt big areas (&50 ha). Through a number of different SEPM scenarios with different values for a number of parameter, we should be able to assess different hypothesis in factors driving bird colonisation in new burnt patches. These factors to be mainly, landscape context (i.e. difficulty to reach the patch, and potential presence of coloniser sources), dispersal constraints, type of regenerating vegetation after fire, and species characteristics (niche breadth, etc).

Analog Modelling of N-S anticlines of the External Sierras (Jaca basin, Southern Pyrenees)

Report for the scientific sojourn carried out at the Uppsala Universitet, Sweden, from April to July the 2007. Two series of analogue models are used to explore ductile-frictional contrasts of the basal décollement in the development of oblique and transverse structures simultaneously to thin-skinned shortening. These models simulate the evolution of the Central External Sierras (Southern Pyrenees, Spain), which constitute the frontal emerging part of the southernmost Pyrenean thrust sheet. They are characterized by the presence of transverse N-S to NW-SE anticlines, which are perpendicular to the Pyrenean structural trend and developed in the hangingwall of the Santo Domingo thrust system, detaching on an unevenly distributed Triassic materials (evaporitic-dolomitic interfingerings). Model setup performs a décollement made by three patches of silicone neighbouring pure brittle sand. Model series A test the thickness ratio between overburden and décollement. Model series B test the width of frictional detachment areas. Model results show how deformation reaches further in areas detached on ductile layer whereas frictional décollement areas assimilate the strain by means of an additional uplift. This replicates the structural style of Central External Sierras: higher structural relief of N-S anticlines with regard to orogen-parallel structures, absence of a representative ductile décollement in the core, tilting towards the orogen and foreland-side closure not thrusted by the frontal emerging South-Pyrenean thrust.

Interlinkages and forecasting made possible by the use of the DECOIN analytical tool kit

This technical report is a document prepared as a deliverable [D4.3 Report of the Interlinkages and forecasting prototype tool] of a EU project – DECOIN Project No. 044428 - FP6-2005-SSP-5A. The text is divided into 4 sections: (1) this short introductory section explains the purpose of the report; (2) the second section provides a general discussion of a systemic problem found in existing quantitative analysis of sustainability. It addresses the epistemological implications of complexity, which entails the need of dealing with the existence of Multiple-Scales and non-equivalent narratives (multiple dimensions/attributes) to be used to define sustainability issues. There is an unavoidable tension between a “steady-state view” (= the perception of what is going on now – reflecting a PAST --& PRESENT view of the reality) versus an “evolutionary view” (= the unknown transformation that we have to expect in the process of becoming of the observed reality and in the observer – reflecting a PRESENT --& FUTURE view of the reality). The section ends by listing the implications of these points on the choice of integrated packages of sustainability indicators; (3) the third section illustrates the potentiality of the DECOIN toolkit for the study of sustainability trade-offs and linkages across indicators using quantitative examples taken from cases study of another EU project (SMILE). In particular, this section starts by addressing the existence of internal constraints to sustainability (economic versus social aspects). The narrative chosen for this discussion focuses on the dark side of ageing and immigration on the economic viability of social systems. Then the section continues by exploring external constraints to sustainability (economic development vs the environment). The narrative chosen for this discussion focuses on the dark side of current strategy of economic development based on externalization and the “bubbles-disease”; (4) the last section presents a critical appraisal of the quality of energy data found in energy statistics. It starts with a discussion of the general goal of statistical accounting. Then it introduces the concept of multipurpose grammars. The second part uses the experience made in the activities of the DECOIN project to answer the question: how useful are EUROSTAT energy statistics? The answer starts with an analysis of basic epistemological problems associated with accounting of energy. This discussion leads to the acknowledgment of an important epistemological problem: the unavoidable bifurcations in the mechanism of accounting needed to generate energy statistics. By using numerical example the text deals with the following issues: (i) the pitfalls of the actual system of accounting in energy statistics; (ii) a critical appraisal of the actual system of accounting in BP statistics; (iii) a critical appraisal of the actual system of accounting in Eurostat statistics. The section ends by proposing an innovative method to represent energy statistics which can result more useful for those willing develop sustainability indicators.

Modelling dependence in a ratemaking procedure with multivariate Poisson regression models

When actuaries face with the problem of pricing an insurance contract that contains different types of coverage, such as a motor insurance or homeowner's insurance policy, they usually assume that types of claim are independent. However, this assumption may not be realistic: several studies have shown that there is a positive correlation between types of claim. Here we introduce different regression models in order to relax the independence assumption, including zero-inflated models to account for excess of zeros and overdispersion. These models have been largely ignored to multivariate Poisson date, mainly because of their computational di±culties. Bayesian inference based on MCMC helps to solve this problem (and also lets us derive, for several quantities of interest, posterior summaries to account for uncertainty). Finally, these models are applied to an automobile insurance claims database with three different types of claims. We analyse the consequences for pure and loaded premiums when the independence assumption is relaxed by using different multivariate Poisson regression models and their zero-inflated versions.

Testing, not modelling, the impact of cohesion support: a theoretical framework and some preliminary results for the Spanish regions

This paper develops a simple model that can be used to estimate the effectiveness of Cohesion expenditure relative to similar but unsubsidized projects, thereby making it possible to explicitly test an important assumption that is often implicit in estimates of the impact of Cohesion policies. Some preliminary results are reported for the case of infrastructure investment in the Spanish regions.

Integrated assessment of agricultural sustainability: the pros and cons of reductionism

In this paper I review a series of theoretical concepts that are relevant for the integrated assessment of agricultural sustainability but that are not generally included in the curriculum of the various scientific disciplines dealing with quantitative analysis of agriculture. I first illustrate with plain narratives and concrete examples that sustainability is an extremely complex issue requiring the simultaneous consideration of several aspects, which cannot be reduced into a single indicator of performance. Following, I justify this obvious need for multi-criteria analysis with theoretical concepts dealing with the epistemological predicament of complexity, starting from classic philosophical lessons to arrive to recent developments in complex system theory, in particular Rosen´s theory of modelling relation which is essential to analyze the quality of any quantitative representation. The implications of these theoretical concepts are then illustrated with applications of multi-criteria analysis to the sustainability of agriculture. I wrap up by pointing out the crucial difference between "integrated assessment" and "integrated analysis". An integrated analysis is a set of indicators and analytical models generating an analytical output. An integrated assessment is much more than that. It is about finding an effective way to deal with three key issues: (i) legitimacy – how to handle the unavoidable existence of legitimate but contrasting points of view about different meanings given by social actors to the word "development"; (ii) pertinence – how to handle in a coherent way scientific analyses referring to different scales and dimensions; and (iii) credibility – how to handle the unavoidable existence of uncertainty and genuine ignorance, when dealing with the analysis of future scenarios.

Modelling Interbank Relations during the International Financial Crisis

This paper examines the effects of the current financial crisis on the correlations of four international banking stocks. We find that in the beginning of the crisis banks generally show a transition to a higher correlation followed by a dramatic decline towards the end of 2008. These findings are consistent with both traditional contagion theory and the more recent network theory of contagion. JEL classifications: C51; G15 Keywords: Financial Crises; Contagion; Interbank Markets.

Sound Texture Modelling

In the PhD thesis “Sound Texture Modeling” we deal with statistical modelling or textural sounds like water, wind, rain, etc. For synthesis and classification. Our initial model is based on a wavelet tree signal decomposition and the modeling of the resulting sequence by means of a parametric probabilistic model, that can be situated within the family of models trainable via expectation maximization (hidden Markov tree model ). Our model is able to capture key characteristics of the source textures (water, rain, fire, applause, crowd chatter ), and faithfully reproduces some of the sound classes. In terms of a more general taxonomy of natural events proposed by Graver, we worked on models for natural event classification and segmentation. While the event labels comprise physical interactions between materials that do not have textural propierties in their enterity, those segmentation models can help in identifying textural portions of an audio recording useful for analysis and resynthesis. Following our work on concatenative synthesis of musical instruments, we have developed a pattern-based synthesis system, that allows to sonically explore a database of units by means of their representation in a perceptual feature space. Concatenative syntyhesis with “molecules” built from sparse atomic representations also allows capture low-level correlations in perceptual audio features, while facilitating the manipulation of textural sounds based on their physical and perceptual properties. We have approached the problem of sound texture modelling for synthesis from different directions, namely a low-level signal-theoretic point of view through a wavelet transform, and a more high-level point of view driven by perceptual audio features in the concatenative synthesis setting. The developed framework provides unified approach to the high-quality resynthesis of natural texture sounds. Our research is embedded within the Metaverse 1 European project (2008-2011), where our models are contributting as low level building blocks within a semi-automated soundscape generation system.

Conditional compositional biplots: theory and application

The biplot has proved to be a powerful descriptive and analytical tool in many areasof applications of statistics. For compositional data the necessary theoreticaladaptation has been provided, with illustrative applications, by Aitchison (1990) andAitchison and Greenacre (2002). These papers were restricted to the interpretation ofsimple compositional data sets. In many situations the problem has to be described insome form of conditional modelling. For example, in a clinical trial where interest isin how patients’ steroid metabolite compositions may change as a result of differenttreatment regimes, interest is in relating the compositions after treatment to thecompositions before treatment and the nature of the treatments applied. To study thisthrough a biplot technique requires the development of some form of conditionalcompositional biplot. This is the purpose of this paper. We choose as a motivatingapplication an analysis of the 1992 US President ial Election, where interest may be inhow the three-part composition, the percentage division among the three candidates -Bush, Clinton and Perot - of the presidential vote in each state, depends on the ethniccomposition and on the urban-rural composition of the state. The methodology ofconditional compositional biplots is first developed and a detailed interpretation of the1992 US Presidential Election provided. We use a second application involving theconditional variability of tektite mineral compositions with respect to major oxidecompositions to demonstrate some hazards of simplistic interpretation of biplots.Finally we conjecture on further possible applications of conditional compositionalbiplots