Improving TCP Performance on CSMA/CA Connections

In IP networks, most of packets, that have been dropped, are recovered after the expiration of retransmission timeouts. These can result in unnecessary retransmissions and needless reduction of congestion window. An inappropriate retransmission timeout has a huge impact on TCP performance. In this paper we have proved that CSMA/CA mechanism can cause TCP retransmissions due to CSMA/CA effects. For this we have observed three wireless connections that use CSMA/CA: with good link quality, poor link quality and in presence of cross traffic. The measurements have been performed using real devices. Through tracking of each transmitted packet it is possible to analyze the relation between one-way delay and packet loss probability and the cumulative distribution of distances between peaks of OWDs. The distribution of OWDs and the distances between peaks of OWDs are the most important parameters of tuning TCP retransmission timeout on CSMA/CA networks. A new perspective through investigating the dynamical relation between one-way delay and packet loss ratio depending on the link quality to enhance the TCP performance has been provided.

Efficiency Comparison of DFT/IDFT Algorithms by Evaluating Diverse Hardware Implementations

In this paper we investigate various algorithms for performing Fast Fourier Transformation (FFT)/Inverse Fast Fourier Transformation (IFFT), and proper techniques for maximizing the FFT/IFFT execution speed, such as pipelining or parallel processing, and use of memory structures with pre-computed values (look up tables -LUT) or other dedicated hardware components (usually multipliers). Furthermore, we discuss the optimal hardware architectures that best apply to various FFT/IFFT algorithms, along with their abilities to exploit parallel processing with minimal data dependences of the FFT/IFFT calculations. An interesting approach that is also considered in this paper is the application of the integrated processing-in-memory Intelligent RAM (IRAM) chip to high speed FFT/IFFT computing. The results of the assessment study emphasize that the execution speed of the FFT/IFFT algorithms is tightly connected to the capabilities of the FFT/IFFT hardware to support the provided parallelism of the given algorithm. Therefore, we suggest that the basic Discrete Fourier Transform (DFT)/Inverse Discrete Fourier Transform (IDFT) can also provide high performances, by utilizing a specialized FFT/IFFT hardware architecture that can exploit the provided parallelism of the DFT/IDF operations. The proposed improvements include simplified multiplications over symbols given in polar coordinate system, using sinе and cosine look up tables, and an approach for performing parallel addition of N input symbols.

Comparison of Contemporary Protocols for High-speed Data Transport via 10 Gbps WAN Connections

This work is dedicated to comparison of open source as well as proprietary transport protocols for highspeed data transmission via IP networks. The contemporary common TCP needs significant improvement since it was developed as general-purpose transport protocol and firstly introduced four decades ago. In nowadays networks, TCP fits not all communication needs that society has. Caused of it another transport protocols have been developed and successfully used for e.g. Big Data movement. In scope of this research the following protocols have been investigated for its efficiency on 10Gbps links: UDT, RBUDP, MTP and RWTP. The protocols were tested under different impairments such as Round Trip Time up to 400 ms and packet losses up to 2%. Investigated parameters are the data rate under different conditions of the network, the CPU load by sender andreceiver during the experiments, size of feedback data, CPU usage per Gbps and the amount of feedback data per GiByte of effectively transmitted data. The best performance and fair resources consumption was observed by RWTP. From the opensource projects, the best behavior is showed by RBUDP.

A Wireless Mesh Network NS-3 Simulation Model: Implementation and Performance Comparison With a Real Test-Bed

Wireless mesh networks present an attractive communication solution for various research and industrial projects. However, in many cases, the appropriate preliminary calculations which allow predicting the network behavior have to be made before the actual deployment. For such purposes, network simulation environments emulating the real network operation are often used. Within this paper, a behavior comparison of real wireless mesh network (based on 802.11s amendment) and the simulated one has been performed. The main objective of this work is to measure performance parameters of a real 802.11s wireless mesh network (average UDP throughput and average one-way delay) and compare the derived results with characteristics of a simulated wireless mesh network created with the NS-3 network simulation tool. Then, the results from both networks are compared and the corresponding conclusion is made. The corresponding results were derived from simulation model and real-worldtest-bed, showing that the behavior of both networks is similar. It confirms that the NS-3 simulation model is accurate and can be used in further research studies.

Proceedings of the 1st International Conference on Applied Innovations in IT

This volume contains publications of the 1st International Conference on Applied Innovations in IT (ICAIIT), which took place in Koethen March 25th 2013. The conference is devoted to problems of applied research in the fields of mechanical and economical engineering, auotmation and communications as well as of data mining. The research results can be of interest for researchers and development engineers, who deal with theoretical base and the application of the knowledge in the respective areas.

Proceedings of the 2nd International Conference on Applied Innovations in IT

This volume contains publications of the 2nd International Conference on Applied Innovations in IT (ICAIIT), which took place in Koethen March 27th 2014. The conference is devoted to problems of applied research in the fields of automation and communications. The research results can be of interest for researchers and development engineers, who deal with theoretical base and the application of the knowledge in the respective areas.

Proceedings of the 3rd International Conference on Applied Innovations in IT

This volume contains publications of the 3rd International Conference on Applied Innovations in IT (ICAIIT), which took place in Koethen March 19th 2015. The conference is devoted to problems of applied research in the fields of automation and communications. The research results can be of interest for researchers and development engineers, who deal with theoretical base and the application of the knowledge in the respective areas.