Training and development in Irish technology companies

The sustained economic growth that has been experienced in the Irish economy in recent years has relied, to a large extent, on the contribution and performance of those industry sectors that possess the ability to provide high-value-added products and services to domestic and international markets. One such contributor has been the Technology sector. However, the performance of this sector relies upon the availability of the necessary capabilities and competencies for Technology companies to remain competitive. The Expert Group on Future Skills Needs have forecasted future skills shortages in this sector. The purpose of this research has been to examine the extent to which Irish Technology companies are taking measures to meet changing skills requirements, through training and development interventions. Survey research methods (in the form of a mail questionnaire, supported by a Web-based questionnaire) have been used to collect information on the expenditure on, and approach to, training and development in these companies, in addition to the methods, techniques and tools/aids that are used to support the delivery of these activities. The contribution of Government intervention has also been examined. The conclusions have been varied. When the activities of the responding companies are considered in isolation, the picture to emerge is primarily positive. Although the expenditure on training and development is slightly lower than that indicated in previous studies, the results vary by company size. Technical employees are clearly the key focus of training provision, while Senior Managers and Directors, Clerical and Administrative staff and Manual workers are a great deal more neglected in training provision. Expenditure on, and use of, computer-based training methods is high, as is the use of most of the specified techniques for facilitating learning. However, when one considers the extent to which external support (in the form of Government interventions and cooperation with other companies and with education and training providers) is integrated into the overall training practices of these companies, significant gaps in practice are identified. The thesis concludes by providing a framework to guide future training and development practices in the Technology sector.

Optimising the design and manufacture of a customised, prescription fit, Maxillo-facial prosthesis

This thesis is a continuation of the Enterprise-Ireland Research Innovation Fund (RIF) Project entitled’ "Design and Manufacturing of Customised Maxillo-Facial Prostheses" The primary objective of this Internal Research Development Program (IRDP) project was to investigate two fundamental design changes 1 To incorporate the over-denture abutments directly into the implant. 2 To remove the restraining wings by the addition of screws, which affix the. implant to the dense material of the jawbone. The prosthetic was redesigned using the ANSYS Finite Element Analysis software program and analysed to* • Reduce the internal von Mises stress distribution The new prosthetic had a -63.63 % lower von Mises stress distribution when compared with the original prosthetic. • Examine the screw preload effects. A maximum relative displacement of 22 6 * lO^mm between the bone and screw was determined, which is well below the critical threshold of micromotion which prevents osseointegration • Investigate the prosthetic-bone contact interface. Three models of the screw, prosthesis, and bone, were studied. (Axisymmetnc, quarter volume, and full volume), a recommended preload torque of 0 32 Nm was applied to the prosthetic and a maximum von Mises stress of 1.988 MPa was predicted • Study the overdenture removal forces. This analysis could not be completed because the correct plastic multilinear properties of the denture material could not be established The redesigned prosthetic was successfully manufactured on a 3-axis milling machine with an indexing system The prosthetic was examined for dimensional quality and strength The research established the feasibility of the new design and associated manufacturing method.

Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.

Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.

Age, growth and reproductive biology of Plaice, (Pleuronectes platessa L.) in Irish waters, 2003-2005

The current study presents data on age and growth for plaice (Pleuronectes platessa L.) sampled between November 2003 and February 2005 in ICES areas Via (northwest coast of Ireland), Vila (Irish Sea), Vllg (Celtic Sea), VDj (southwest coast of Ireland) and VHb (west coast of Ireland), and data on the reproductive biology and maturity of plaice in ICES area Vllb (west coast of Ireland). This is the first detailed account of the biology of plaice for some of these areas. It is intended that this study will improve understanding of the life cycle of plaice and help fisheries scientists to better predict the effect of fishing effort on Irish plaice stocks. The overall length range found for plaice was 9-51.99cm TL, with a length range of 9-5 lcm TL for females and 9-40cm for males. In all ICES areas the length range for female fish was larger than for male fish. The age range of plaice sampled during this study was 1 to 16 years. In all ICES areas females had a greater range in ages and fish in the larger age groups. From analysis of length and age data it was concluded that there was a significant difference (P=0.000) in growth rate of males and females between ICES areas sampled in March 2004. The highest rate of fishing mortality was determined for ICES area Via (F=1.06) and the lowest for ICES area Vila (F=0.56). In each ICES area male and female plaice have fully recruited to the population by age 4, with the exception of females in ICES area Via, for which a tr value of 5 years was determined. Length at first maturity (L50%) was determined to be 23cm and 21cm for males and females respectively. Age at first maturity (A50%) was determined to be 3 years for both males and females. It was found that males and females in ICES areas Vllb, Vila and Via are well above the length and age at first maturity when they are recruited to the fishery. In ICES area Vllb female plaice spawn from November to March, with peak spawning occurring in February, and male plaice spawn from November to April, with peak spawning occurring in November. Spawning females had an age range of 2 to 10 years and spawning males had an age range of 2 to 7 years. From the oocyte length frequency distributions, it was determined that the plaice is a determinate batch spawner. During this investigation a total of 177 ovaries and 127 testes were staged using both macroscopic and histological criteria. The overall percentage of maturity stages which compared favorably between the two assessment methods was 22.03% for female plaice and 37.80% for male plaice. In general, the findings of this study indicate that there was a very poor match between the macroscopic and histological assessment methods. Given that the histological determination of these stages is based on the observation of a distinct set of developmental features, it is expected that it would be more accurate to use histologically assessed gonads to calculate the annual percentage maturity assessment. The biology of plaice in the areas studied is compared with previous studies of plaice in Irish and European waters.