What value can be attached to a concept of mystery and has it a place in contemporary Western culture?

The idea for this thesis arose from a chain of reactions first set in motion by a particular experience. In keeping with the contemporary need to deconstruct every phenomenon it seemed important to analyse this experience in the hope of a satisfactory explanation. The experience referred to is the aesthetic experience provoked by works of art. The plan for the thesis involved trying to establish whether the aesthetic experience is unique and individual, or whether it is one that is experienced universally. Each question that arises in the course of this exploration promotes a dialectical reaction. I rely on the history of aesthetics as a philosophical discipline to supply the answers. This study concentrates on the efforts by philosophers and critical theorists to understand the tensions between the empirical and the emotional, the individual and the universal responses to the sociological, political and material conditions that prevail and are expressed through the medium of art. What I found is that the history of aesthetics is full of contradictory evidence and cannot provide a dogmatic solution to the questions posed. In fact what is indicated is that the mystery that attaches to the aesthetic experience is one that can also apply to the spiritual or transcendent experience. The aim of this thesis is to support the contribution of visual art in the spiritual well being of human development and supports the uniqueness of the evaluation and aesthetic judgement by the individual of a work of art. I suggest that mystery will continue to be of value in the holistic development of human beings and this mystery can be expressed through visual art. Furthermore, this thesis might suggest that what could be looked at is whether a work of art may be redemptive in its affect and offset the current decline in affective religious practice.

A study of the interaction between national and corporate culture in a selection of Irish based companies

This research studies the phenomenon of national and corporate culture. National culture is the culture the members of a country share and corporate culture is a subculture which members of an organisation share (Schein, 1992). The objective of this research is to reveal if the employees within equivalent Irish and American companies share the same corporate and national culture and to ascertain if, within each company, there is a link between national culture and corporate culture. The object of this study is achieved by replicating research which was conducted by Shing (1997) in Taiwan. Hypotheses and analytical tools developed by Shing are employed in the current study to allow comparison of results between Shing’s study and the current study. The methodology used, called for the measurement and comparison of national and corporate culture in two equivalent companies within the same industry. The two companies involved in this study are both located in Ireland and are of American and Irish origin. A sample of three hundred was selected and the response rate was 54%. The findings from this research are: (1) The two companies involved had different corporate cultures, (2) They had the same national culture, (3) There was no link between national culture and corporate culture within either company, (4) The findings were not similar to those of Shing (1997). The implication of these findings is that national and corporate culture are separate phenomena therefore corporate culture is not a response to national culture. The results of this research are not reflected in the finding’s of Shing (1997), therefore they are context specific. The core recommendation for management is that, corporate culture should take account of national culture. This is because although employees recognise the espoused values of corporate culture (Schein, 1992), they are at the same time influenced by a much stronger force, their national culture.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

Investigation into the potential for establishing a self-sustainable wetland ecosystem over pyritic mine tailings

Research was conducted to investigate the potential for ecologically engineering a sustainable wetland ecosystem over pyritic mine tailings to prevent the generation of acid mine drainage. Ecological engineering is technology with the primary goal being the creation of self-sustainable ecological systems. Work involved the design and construction of a pilot-scale wetland system comprising three wetland cells, each covering 100 m2. Approximately forty tonnes of pyritic mine tailings were deposited on the base of the first cell above a synthetic liner, covered with peat, flooded and planted with emergent wetland macrophytes Typha latifolia, Phragmites australis, and Juncus effusus. The second cell was constructed as a conventional free water surface wetland, planted identically, and used as a reference wetland/experimental control. Wetland monitoring to determine long-term sustainability focused on indicators of ecosystem health including ecological, hydrological, physico-chemical, geochemical, and biotic metrics. An integrated assessment was conducted that involved field ecology in addition to ecological risk assessment. The objective of the field ecology study was to use vegetative parameters as ecological indicators for documenting wetlands success or degradation. The goal of the risk assessment was to determine if heavy-metal contamination of the wetland sediments occurred through metal mobilisation from the underlying tailings, and to evaluate if subsequent water column chemistry and biotic metal concentrations were significantly correlated with adverse wetland ecosystem impacts. Data were used to assess heavy metal bioavailability within the system as a function of metal speciation in the wetland sediments. Results indicate hydrology is the most important variable in the design and establishment of the tailings wetland and suggest a wetland cover is an ecologically viable alternative for pyritic tailings which are feasible to flood. Ecological data indicate that in terms of species richness and diversity, the tailings-wetland was exhibiting the ecological characteristics of natural wetlands within two years. Ata indicate that pH and conductivity in the tailings-wetland were not adversely impacted by the acid-generating potential or sulphate concentration of the tailings substrate and its porewater. Similarly, no enhanced seasonal impacts from sulphate or metals in the water column, nor adverse impacts on the final water quality of the outflows, were detected. Mean total metal concentrations in the sediments of the tailings-wetland indicate no significant adverse mobilisation of metals into the peat substrate from the tailings. Correlation analyses indicate a general increase in sediment metal concentration in this wetland with increasing water depth and pH, and a corresponding decrease in the metal concentrations of the water column. Sediment extractions also showed enrichment of Cd, Fe, Pb and Zn in the oxidisable fraction (including sulphides and organic matter) of the tailings-wetland sediments. These data suggest that adsorption and coprecipitation of metals is occurring from the water column of the tailings wetland with organic material at increasing depths under reducing conditions. The long-term control of metal bioavailability in the tailings wetland will likely be related to the presence and continual build-up of organic carbon binding sites in the developing wetland above the tailings. Metal speciation including free-metal ion concentration and the impact of physico-chemical parameters particularly pH and organic matter, were investigated to assess ecotoxicological risk. Results indicate that potentially bioavailable metals (the sum of the exchangeable and reducible fractions) within the tailings wetland are similar to values cited for natural wetlands. Estimated free-metal ion concentrations calculated from geochemical regression models indicate lower free-metal ion concentrations of Cd in the tailings wetland than natural wetlands and slightly higher free-metal ion concentrations of Pb and Zn. Increased concentrations of metals in roots, rhizomes and stems of emergent macrophytes did not occur in the tailings wetland. Even though a substantial number of Typha latifolia plants were found rooting directly into tailings, elevated metals were not found in these plant tissues. Phragmites also did not exhibit elevated metal concentrations in any plant tissues. Typha and Phragmites populations appear to be exhibiting metal-tolerant behaviour. The chemistry of the water column and sediments in Silvermines wetland were also investigated and were much more indicative of a wetland system impacted by heavy metal contamination than the tailings-wetland. Mean Dc, Fe, Mn, Pb and Zn concentrations in the water column and sediments of Silvermines wetlands were substantially higher than in the pilot wetlands and closely approximate concentrations in these matrices contaminated with metals from mining. In addition, mean sulphate concentration in Silvermines wetland was substantially higher and is closer to sulphate concentrations in waters associated with mining. Potentially bioavailable metals were substantially elevated in Silvermines wetland in comparison to the pilot wetlands and higher than those calculated for natural rive sediments. However, Fe oxy-hydroxide concentrations in Silvermines sediments are also much higher than in the pilot wetlands and this significantly impacts the concentration of free-metal ions in the sediment porewater. The free-metal ion concentrations for Pb and Zn indicate that Silvermines wetland is retaining metals and acting as a treatment wetland for drainage emanating from Silvermines tailings dam.