Acoustic emission analysis of the effect of a 2D wedge shaped blade on the compact bone cutting process

Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during an operative procedure. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occuring with continued loading. When a material cracks, energy is emitted in the form of Acoustic Emission (AE) signals that spread in all directions, therefore, AE transducers can be used to monitor the occurrence and development of microcracking and crack propagation in cortical bone. In this research, number of AE signals (hits) and related parameters including amplitude, duration and absolute energy (abs-energy) were recorded during the indentation cutting process by a wedge blade on cortical bone specimens. The cutting force was also measured to correlate between load-displacement curves and the output from the AE sensor. The results from experiments show AE signals increase substantially during the loading just prior to fracture between 90% and 100% of maximum fracture load. Furthermore, an amplitude threshold value of 64dB (with approximate abs-energy of 1500 aJ) was established to saparate AE signals associated with microcracking (41 – 64dB) from fracture related signals (65 – 98dB). The results also demonstrated that the complete fracture event which had the highest duration value can be distinguished from other growing macrocracks which did not lead to catastrophic fracture. It was observed that the main crack initiation may be detected by capturing a high amplitude signal at a mean load value of 87% of maximum load and unsteady crack propagation may occur just prior to final fracture event at a mean load value of 96% of maximum load. The author concludes that the AE method is useful in understanding the crack initiation and fracture during the indentation cutting process.

Age, growth and reproductive biology of whiting Merlangius merlangus (Linnaeus 1758) in the Celtic Sea

Age, growth and reproductive biology were investigated for whiting (Merlangius merlangus) captured from the Celtic Sea (ICES division Vllg), for the period January 2001 to January 2002. Females dominated the sex ratio of 1: 2.25. The relative abundance of females exceeded the number of males in all length classes. The relationship between weight (g) and total length (cm) was the same for male and female whiting. A total of 973 fish were aged and the maximum age recorded was 11 years. Results from an intercalibration exercise showed 87% agreement in age readings between the author and an expert in ageing whiting at the Marine Institute. Females were dominated by 2 year olds, while males were dominated by 3 year olds. Lx was estimated as 38cm and a growth rate was calculated K = 0.3769 year'1. Females were fully recruited to the fishery at 3 years of age, while the age at full recruitment (tr) for males was 4 years. Female whiting spawned from late February to June 2001 and matured at a total length of 23 cm in their first year. Female whiting reached L5o at a total length of 28 cm and 2.7 years of age. Male whiting spawned from February to June 2001. They matured at a total length of 21 cm and in their first year. Male whiting reached L50 at a total length of 30.4 cm and 3.6 years of age. The following critical points should be taken into account in the management of the Celtic Sea whiting stock: An Fpa should be established in order to assess the current level of fishing mortality; The maturity ogives need further study; The extent of gutting of large fish before landing by fishers in the fleet should be investigated and the apparent decline in size of 4 - 7 year old fish in the Celtic Sea between 1996 and 2001 needs to be assessed.

The effects of detergent loading on rotating biological contactor (RBC) wastewater treatment efficiency

There are presently over 182 RBC plants, treating domestic wastewater, in the Republic of Ireland, 136 of which have been installed since 1986. The use of this treatment plant technology, although not new, is becoming increasingly popular. The aim of this research was to assess the effects that a household detergent has on rotating biological contractor treatment plant efficiency. Household detergents contribute phosphorus to the surrounding environment and can also remove beneficial biomass from the disc media. A simple modification was made to a conventional flat disc unit to increase the oxygen transfer of the process. The treatment efficiency of the modified RBC (with aeration cups attached) was assessed against a parallel conventional system, with and without degergent loading. The parameters monitored were chemical oxygen demand (COD), bio-chemical oxygen demand (BOD), nitrates, phosphates, dissolved oxygen, the motors power consumption, pH, and temperature. Some microscopic analysis of the biofilm was also to be carried out. The treatment efficiency of both units was compared, based on COD/BOD removal. The degree of nitrification achievable by both units was also assessed with any fluctuations in pH noted. Monitoring of the phosphorus removal capabilities of both units was undertaken. Relationships between detergent concentrations and COD removal efficiencies were also analysed.