A review of the development of regional sludge treatment centres and a baseline characterisation of Irish sewage sludges

This Study assessed the development of sludge treatment and reuse policy since the original 1993 National Sludge Strategy Report (Weston-FTA, 1993). A review of the 48 sludge treatment centres, current wastewater treatment systems and current or planned sludge treatment and reuse systems was carried out Sludges from all Regional Sludge Treatment Centres (areas) were characterised through analysis of selected parameters. There have been many changes to the original policy, as a result of boundary reviews, delays in developing sludge management plans, development in technology and changes in tendering policy, most notably a move to design-build-operate (DBO) projects. As a result, there are now 35 designated Hub Centres. Only 5 of the Hub Centres are producing Class A Biosolids. These are Ringsend, Killamey, Carlow, Navan and Osberstown. Ringsend is the only Hub Centre that is fully operational, treating sludge from surrounding regions by Thermal Drying. Killamey is producing Class A Biosolids using Autothermal Thermophilic Aerobic Digestion (ATAD) but is not, as yet, treating imported sludge. The remaining three plants are producing Class A Biosolids using Alkaline Stabilisation. Anaerobic Digestion with post pasteurisation is the most common form of sludge treatment, with 11 Hub Centres proposing to use it. One plant is using ATAD, two intend to use Alkaline Stabilisation, seven have selected Thermal Drying and three have selected Composting. While the remaining plants have not decided which sludge treatment to select, this is because of incomplete Sludge Management Plans and on DBO contracts. Analysis of sludges from the Hub Centres showed that all Irish sewage sludge is safe for agricultural reuse as defined by the Waste Management Regulations {Use of Sewage Sludge in Agriculture) (S.I. 267/2001), providing that a nutrient management plan is taken into consideration and that the soil limits of the 1998 (S.I. 148/1998) Waste Management Regulations are not exceeded.

A comparative study of the physical, chemical and microbiological status of soils, as influenced by conventional and reduced tillage

Historically, shifts to reduced and no-tillage management for production of crops were fostered by needs to decrease soil erosion and loss of organic matter, reduce fuel and labour costs and conserve soil water, as compared with conventional fallow tillage management. Recent interest in maintaining soil quality has been stimulated by a renewed awareness of the importance of soil condition to both the sustainability of agricultural production systems and environmental quality (Doran and Parkin, 1996). The aim of this project was to determine the impact on the physical, chemical and microbiological status of the soil of conventional and reduced tillage. It has been suggested that the reduced soil disturbance associated with the tine cultivator improves soil structure, increases nutrient content in the top 10cm of soil, increases microbial activity and improves physical characteristics. From this study it was determined that the environmental benefits linked to reduced tillage in literature, did not develop in the first two years of this programmes implementation. The results of this study determined that soil nutrients did not increase in concentration in the top 10 cm of soil under reduced cultivation. The only exception was exchangeable potassium. As potassium is not a mobile nutrient its movement is dependent on soil disturbance, therefore under reduced cultivation its concentration was allowed to accumulate in the upper horizon of the soil profile. Microbial activity was greater in the conventionally tilled treatments, as determined by total aerobic bacterial numbers. This could be due to the increased rates of soil aeration in this treatment. Numbers of aerobic bacteria were greater in the conventional tillage treatments at both incubation temperatures of 22 and 32° C. The physical characteristics of the soil determined, indicate that below the depth of soil cultivation, cone penetration resistance increases. Therefore the reduced cultivation treatments would be more prone to soil compaction, higher in the soil profile.

Tourism education in Ireland : an analysis of the provision of third level tourism education in Ireland focusing on the needs of the public, private and voluntary sectors

Tourism education in Ireland has witnessed a transformation within the last four decades since CERT introduced the first fundamentals of training in the 1960’s. An analysis of the provision of tourism education in Ireland, focusing on the needs of the public, private and voluntary sectors was the main focus of this study and concentrates mainly on third level provision of tourism education within the island of Ireland. The study examines the role of tourism education in Ireland, establishing any current or emerging trends in third level tourism provision. It identifies and analyses the main stakeholders in the public, private and voluntary sectors and investigates if any requirements exist in the provision of third level education. The multi-faceted nature of the tourism industry has resulted in the provision of a diverse range of educational courses. As a result of this diversity, a question hangs over the status of tourism as a professional discipline within itself. Other issues identified through this study are the over provision of tourism courses and the current and future disparity within tourism education. The qualitative nature of the research involved questioning of major stakeholders and educators who influence tourism education provision and developing an overview of the current status of tourism education provision in Ireland identifying the present needs of each sector. Finally several strategies are suggested which may enhance third level tourism education in the future.

An empirical study of the effectiveness of Irish banks’ lending regulations

The objective of this thesis will be to examine the effectiveness of lending regulations for Irish banks both prior to and after the collapse of the banking sector. The research developed a profile of the banking sector in Ireland, then evaluate the levels of stability in the Irish banking sector. In the course of this research, the author tried to establish an understanding of who is responsible for lending regulations for banks in Ireland, Investigate in particular: AIB, Ulster Bank & Anglo Irish Bank’s level of compliance with lending regulations between the Celtic Tiger and the present.

An Investigation into Irish State patronage of the visual arts.

The focus of this research is in ascertaining how and why the Irish state patronises the visual arts. The framework that the state puts in place for the support of the arts influences the creation of art. The initial standpoint from which to evaluate the system is founded on the belief that art is of social good. The second source of belief is in the necessity for an autonomous setting in which it can be created. These two beliefs underpin state patronage of the arts in contemporary society. Therefore they have to be examined carefully in order to see if they hold up. This requires an investigation into the formation of value. This is undertaken by looking into the social development of western society and its influence on the placement of arts value. Establishing how arts value to society is defined provides a means by which to investigate the manner in which the state patronises the visual arts. Two case studies provide the evidence in how the state supports the arts and why it chooses to do so. The Irish Museum of Modem Art is used as an example of the state’s role in the maintenance of the canon of art. The second case study looks at the work being done by Breaking Ground. Breaking Ground is an extensive art project as an element of the regeneration process happening in Ballymun funded by the state. It provides and insight into how the state utilises art in the unification of a social group.

A study of the interaction between national and corporate culture in a selection of Irish based companies

This research studies the phenomenon of national and corporate culture. National culture is the culture the members of a country share and corporate culture is a subculture which members of an organisation share (Schein, 1992). The objective of this research is to reveal if the employees within equivalent Irish and American companies share the same corporate and national culture and to ascertain if, within each company, there is a link between national culture and corporate culture. The object of this study is achieved by replicating research which was conducted by Shing (1997) in Taiwan. Hypotheses and analytical tools developed by Shing are employed in the current study to allow comparison of results between Shing’s study and the current study. The methodology used, called for the measurement and comparison of national and corporate culture in two equivalent companies within the same industry. The two companies involved in this study are both located in Ireland and are of American and Irish origin. A sample of three hundred was selected and the response rate was 54%. The findings from this research are: (1) The two companies involved had different corporate cultures, (2) They had the same national culture, (3) There was no link between national culture and corporate culture within either company, (4) The findings were not similar to those of Shing (1997). The implication of these findings is that national and corporate culture are separate phenomena therefore corporate culture is not a response to national culture. The results of this research are not reflected in the finding’s of Shing (1997), therefore they are context specific. The core recommendation for management is that, corporate culture should take account of national culture. This is because although employees recognise the espoused values of corporate culture (Schein, 1992), they are at the same time influenced by a much stronger force, their national culture.

The vulnerability to pollution and hydrochemical variation of eleven springs (catchments) in the karst lowlands of the west of Ireland

The vulnerability to pollution and hydrochemical variation of groundwater in the mid-west karstic lowlands of Ireland were investigated from October 1992 to September 1993, as part of an EU STRIDE project at Sligo Regional Technical College. Eleven springs were studied in the three local authority areas of Co. Galway, Co. Mayo, and Co. Roscommon. Nine of the springs drain locally or regionally important karstic aquifers and two drain locally important sand and gravel aquifers. The maximum average daily discharge of any of the springs was 16,000 m3/day. Determination of the vulnerability of groundwater to pollution relies heavily on an examination of subsoil deposits in an area since they can act as a protecting or filtering layer over groundwater. Within aquifers/spring catchments, chemical reactions such as adsorption, solution-precipitation or acid-base reactions occur and modify the hydrochemistry of groundwater (Lloyd and Heathcote, 1985). The hydrochemical processes) that predominate depend cm the mineralogy of the aquifer, the hydrogeological environment, the overlying subsoils, and the history of groundwater movement. The aim of this MSc research thesis was to investigate the hydrochemical variation of spring outflow and to assess the relationship between these variations and the intrinsic vulnerability of the springs and their catchments. If such a relationship can be quantified, then it is hoped that the hydrochemical variation of a spring may indicate the vulnerability of a spring catchment without the need for determining it by field mapping. Such a method would be invaluable to any of the three local authorities since they would be able to prioritise sources that are most at risk from pollution, using simple techniques of chemical sampling, and statistical analysis. For each spring a detailed geological, hydrogeological and hydrochemical study was carried out. Individual catchment areas were determined with a water balance/budget and groundwater tracing. The subsoils geology for each spring catchment were mapped at the 1:10,560 scale and digitised to the 1:25,000 scale with AutoCad™ and Arclnfo™. The vulnerability of each spring was determined using the Geological Survey's vulnerability guidelines. Field measurements and laboratory based chemistry analyses of the springs were undertaken by personnel from both the EPA Regional Laboratory in Castlebar, Co. Mayo, and the Environment Section of Roscommon Co. Council. Electrical conductivity and temperature (°C) were sampled fortnightly, in the field, using a WTW microprocessor conductivity meter. A percentage (%) vulnerability was applied to each spring in order to indicate the areal extent of the four main classes of vulnerability (Extreme, High, Moderate, and Low) which occurred within the confines of each spring catchment. Hydrochemical variation for the springs were presented as the coefficient of variation of electrical conductivity. The results of this study show that a clear relationship exists between the degree of vulnerability of each catchment area as defined by the subsoil cover and the coefficient of variation of EC, with the coefficient of variation increasing as the vulnerability increases. The coefficient of variation of electrical conductivity is considered to be a parameter that gives a good general reflection of the degree of vulnerability occurring in a spring catchment in Ireland's karstic lowlands.

Implementation of the I.S. EN 16001:2009 energy management standard into GlaxoSmithKline (GSK) Ltd, Cork

As manufacturers face an increasingly competitive environment, they seek out opportunities to reduce production costs without negatively affecting the yield or the quality of their finished products. The challenge of maintaining high product quality while simultaneously reducing production costs can often be met through investments in energy efficient technologies and energy efficiency practices. Energy management systems can offer both technological and best practice efficiencies in order to achieve substantial savings. A strong energy management system provides a solid foundation for an organisation to reduce production costs and improve site efficiency. The I.S EN16001 energy management standard specifies the requirements for establishing, implementing, maintaining and improving an energy management system and represents the latest best practice for energy management in Ireland. The objective of the energy management system is to establish a systematic approach for improving energy performance continuously. The I.S EN16001 standard specifies the requirements for continuous improvement through using energy more efficiently. The author analysed how GlaxoSmithKline’s (GSK) pharmaceutical manufacturing facility in Cork implemented the I.S. EN16001 energy management system model, and defined how energy saving opportunities where identified and introduced to improve efficiency performance. The author performed an extensive literature research in order to determine the current status of the pharmaceutical industry in Ireland, the processes involved in pharmaceutical manufacturing, the energy users required for pharmaceutical manufacturing and the efficiency measures that can be applied to these energy users in order to reduce energy consumption. The author then analysed how energy management standards are introduced to industry and critically analysed the driving factors for energy management performance in Ireland through case studies. Following an investigation as to how the I.S. EN16001 energy management standard is operated in GSK, a critical analysis of the performance achieved by the GSK energy management system is undertaken in order to determine if implementing the I.S EN16001 standard accelerates achieving energy savings. Since its introduction, the I.S. EN16001 model for energy management has enabled GSK to monitor, target and identify energy efficiency opportunities throughout the site. The model has put in place an energy management system that is continuously reviewed for improvement and to date has reduced GSK’s site operations cost by over 30% through technical improvements and generating energy awareness for smarter energy consumption within the GSK Cork site. Investment in I.S. EN16001 has proved to be a sound business strategy for GSK especially in today's manufacturing environment.

Flood analysis of the clare river catchment considering traditional factors and climate change

The main objective of this thesis on flooding was to produce a detailed report on flooding with specific reference to the Clare River catchment. Past flooding in the Clare River catchment was assessed with specific reference to the November 2009 flood event. A Geographic Information System was used to produce a graphical representation of the spatial distribution of the November 2009 flood. Flood risk is prominent within the Clare River catchment especially in the region of Claregalway. The recent flooding events of November 2009 produced significant fluvial flooding from the Clare River. This resulted in considerable flood damage to property. There were also hidden costs such as the economic impact of the closing of the N17 until floodwater subsided. Land use and channel conditions are traditional factors that have long been recognised for their effect on flooding processes. These factors were examined in the context of the Clare River catchment to determine if they had any significant effect on flood flows. Climate change has become recognised as a factor that may produce more significant and frequent flood events in the future. Many experts feel that climate change will result in an increase in the intensity and duration of rainfall in western Ireland. This would have significant implications for the Clare River catchment, which is already vulnerable to flooding. Flood estimation techniques are a key aspect in understanding and preparing for flood events. This study uses methods based on the statistical analysis of recorded data and methods based on a design rainstorm and rainfall-runoff model to estimate flood flows. These provide a mathematical basis to evaluate the impacts of various factors on flooding and also to generate practical design floods, which can be used in the design of flood relief measures. The final element of the thesis includes the author’s recommendations on how flood risk management techniques can reduce existing flood risk in the Clare River catchment. Future implications to flood risk due to factors such as climate change and poor planning practices are also considered.

An assessment of biological and population parameters of the Common whelk, Buccinum undatum (L.) in the region of the North West Irish whelk fishery

The Common whelk, Buccinum undatum (L.) is a conspicuous benthic scavenger in Irish waters, and is a valuable fisheries resource in South East Ireland. B. undatum is fished in many parts of its range, and previous studies have shown that certain life history parameters, which vary with location, make this species vulnerable to overexploitation. This makes research into each exploited stock essential to ensure sustainable fisheries management of the species. In 2003, interest in B. undatum as a complementary species in the inshore fishery east of the Inishowen Peninsula, North West Ireland, initiated investigation into fisheries related biological and population aspects of the species in this region. The current study presents estimates of spatial variation and density of the stock, size at age and growth rates, size and age at onset of sexual maturity, and timing of reproductive events in the region of the North West Irish whelk fishery for the period of June 2003 to May 2004. Analysis of variance of the total shell length of whelk landings to the fishery was conducted over spatial scales of fishing pot, fishing string and landings to vessels. Landings varied significantly in shell length at the spatial scale at which whelks are attracted to baited pots, but did not vary significantly over larger spatial scales. Depletion estimates of stock density from fisheries derived Catch per Unit Effort data and a mark re-capture experiment estimate 0.134 - 0.227 whelks per m2. Two independent methods of age determination found similar growth logistics functions for B. undatum.Modal analysis of length frequency distribution of landings to the fishery estimated symptotic length, Leo = 151.64 mm and Brody growth coefficient, K = 0.04. Analysis of the striae in individual opercula, where each stria was found to represent annual growth, estimated Loo = 137.73 mm and K = 0.12. Common whelks in the region of the North West Irish whelk fishery grow slowly and are long-lived, with 19 opercula striae recorded in one individual. Onset of sexual maturity is late, and no sex-specific differences in size or age at maturity were determined in the present study. Males were found to achieve sexual maturity at 83.30 ± 10.77 mm, and 8.9 - 11.1 years of age, and females at 82.62 ± 10.68 mm and 8.8 to 11.1 years of age. Systematic observations of reproductive events, including histological changes to the female ovary and male testis, and changes in the size and mass of body components, suggest that breeding occurred between the autumn and winter months of October and December 2003. Biological aspects of B. undatum in the study region are compared with previous studies from other regions, and discussed in relation to sustainable management of the fishery.

Acoustic emission analysis of the effect of a 2D wedge shaped blade on the compact bone cutting process

Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during an operative procedure. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occuring with continued loading. When a material cracks, energy is emitted in the form of Acoustic Emission (AE) signals that spread in all directions, therefore, AE transducers can be used to monitor the occurrence and development of microcracking and crack propagation in cortical bone. In this research, number of AE signals (hits) and related parameters including amplitude, duration and absolute energy (abs-energy) were recorded during the indentation cutting process by a wedge blade on cortical bone specimens. The cutting force was also measured to correlate between load-displacement curves and the output from the AE sensor. The results from experiments show AE signals increase substantially during the loading just prior to fracture between 90% and 100% of maximum fracture load. Furthermore, an amplitude threshold value of 64dB (with approximate abs-energy of 1500 aJ) was established to saparate AE signals associated with microcracking (41 – 64dB) from fracture related signals (65 – 98dB). The results also demonstrated that the complete fracture event which had the highest duration value can be distinguished from other growing macrocracks which did not lead to catastrophic fracture. It was observed that the main crack initiation may be detected by capturing a high amplitude signal at a mean load value of 87% of maximum load and unsteady crack propagation may occur just prior to final fracture event at a mean load value of 96% of maximum load. The author concludes that the AE method is useful in understanding the crack initiation and fracture during the indentation cutting process.

An analysis of the use of photogrammetric sorting to audit construction and demolition waste production on site

This study analyses the area of construction and demolition waste (C & D W) auditing. The production of C&DW has grown year after year since the Environmental Protection Agency (EPA) first published a report in 1996 which provided data for C&D W quantities for 1995 (EPA, 1996a). The most recent report produced by the EPA is based on data for 2005 (EPA, 2006). This report estimated that the quantity of C&DW produced for that period to be 14 931 486 tonnes. However, this is a ‘data update’ report containing an update on certain waste statistics so any total provided would not be a true reflection of the waste produced for that period. This illustrates that a more construction site-specific form of data is required. The Department of Building and Civil Engineering in the Galway-Mayo Institute of Technology have carried out two recent research projects (Grimes, 2005; Kelly, 2006) in this area, which have produced waste production indicators based on site-specific data. This involved the design and testing of an original auditing tool based on visual characterisation and the application of conversion factors. One of the main recommendations of these studies was to compare this visual characterisation approach with a photogrammetric sorting methodology. This study investigates the application of photogrammetric sorting on a residential construction site in the Galway region. A visual characterisation study is also carried out on the same project to compare the two methodologies and assess the practical application in a construction site environment. Data collected from the waste management contractor on site was also used to provide further evaluation. From this, a set of waste production indicators for new residential construction was produced: □ 50.8 kg/m2 for new residential construction using data provided by the visual characterisation method and the Landfill Levy conversion factors. □ 43 kg/m2 for new residential construction using data provided by the photogrammetric sorting method and the Landfill Levy conversion factors. □ 23.8 kg/m2 for new residential construction using data provided by Waste Management Contractor (WMC). The acquisition of the data from the waste management contractor was a key element for testing of the information produced by the visual characterisation and photogrammetric sorting methods. The actual weight provided by the waste management contractor shows a significant difference between the quantities provided.

Synthetic and mechanistic studies of the Thia-Fries Rearrangement

A study has been undertaken of the published literature on the Fries rearrangement, thermal, photo and microwave, since its discovery in 1908. A resume of these publications and especially of those pertaining to the thia-Fries rearrangement of sulfamate esters, has been compiled. Phenyl sulfamate, phenyl N,N-dimethylsulfamate, phenyl N,N-diethylsulfamate and phenyl N,N-di-n-propylsulfamate and many of their substituted compounds have been synthesised and purified, a total of thirty nine esters. The sulfamates have been characterised by mp / bp, infrared, C, H and N microanalysis and mass spectrum. Many of these sulfamates, twenty six in total, have been rearranged to sulfonamides in the thia-Fries rearrangement, and subsequently purified. The products were characterised by mp / bp, infrared, C, H and N microanalysis and mass spectrum. Mechanistic studies of the sulfamates have been investigated, particularly phenyl N,N-dimethylsulfamate. The rearrangement with various catalysts and catalytic ratios, the effect of solvents on the rearrangement and many crossover experiments have been carried out to determine the molecularity i.e. whether it is an inter-, intra- or bimolecular reaction. The microwave induced thia-Fries rearrangement has been examined to determine what effect this irradiation has on the rearrangement. Photo thia-Fries rearrangement has also been investigated.

Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.

Ireland’s understudied flatfish: reproduction, age and growth of the dab Limanda limanda (L.) in Irish coastal waters

In Ireland, although flatfish form a valuable fishery, little is known about the smallest, the dab Limanda limanda. In this study, a variety of parameters of reproductive development, including ovarian phase description, gonadosomatic index (GSI), hepatosomatic index (HSI), relative condition (Kn) and oocyte size were analysed to provide information on the dab’s reproductive cycle and spawning periods. Sampling were collected monthly over an 18-month period using bottom trawls of the Irish coastline. A six phase macroscopic guide was developed for both sexes of dab, and verified using histology. In comparisons of macroscopic and microscopic phases, there was high agreement in the proposed female guide (86%), with males demonstratively lower (62%). No significant bias was observed between the the two reproductive methods. When the male macroscopic guide was examined, misclassification was high in phase 5 and phase 5 (41%), with 96% of misclassification occurring in adjacent phases. The sampled population was primarily composed of females, with ratios of females to males 1:0.6, although the predominance of females was less noticeable during the reproductive season. Oocyte growth in dab follows asynchronous development, and spawn over a protracted period indicating a batch spawning strategy. Spawning occurred mainly in early spring, with total regeneration of gonads by May. The length at which 50% of the population was reproductively mature was identified as 14cm and 17cm, for male and female dab, respectively. Precision and bias in age determinations using whole otoliths to age dab was investigated using six age readers from various institutions. Low levels of precision were obtained (CV: 10-23%) inferring the need for an alternative methodology. Precision and bias was influence by the level of experience of the reader, with ageing error attributed to interpretative differences and difficulty in edge determination. Sectioned otolith age determinations were subsequently compared to whole otolith age determinations using two age readers experienced in dab ageing. Although increased precision was observed in whole otoliths from previous estimates (CV=0%, 0% APE), sectioned otoliths were used for growth models. This was based on multinominal logistic regression on age length keys developed using both ageing methods. Biological data (length and age) for both sexes was applied to four growth models, where the Akaike criterion and Multi model Inference indicated the logistic model as having the best fit to the collected data. In general, female dab attained a longer length then males, with growth rates significantly different between the two sexes. Length weight relationships between the two sexes were also significantly different.