14 resultados para Input-output analysis--Ireland
em Galway Mayo Institute of Technology, Ireland
Resumo:
The twin objectives of the work described were to construct nutrient balance models (NBM) for a range of Irish animal production systems and to evaluate their potential as a means of estimating the nutrient composition of farm wastes. The NBM has three components. The first is the intake of nutrients in the animal's diet. The second is retention or the nutrients the animal retains for the production of milk, meat or eggs. The third is the balance or the difference between the nutrient intake and retention. Data on the intake levels and their nutrient value for dairy cows, beef cattle, pigs and poultry systems were assembled. Literature searches and interviews with National experts were the primary sources of information. NBMs were then constructed for each production system. Summary tables of the nutrient values for the common diet constituents used in Irish animal production systems, the nutrient composition of the animal products and the NBMs (nutrient intake, retention and excretion) for a range of production systems were assembled. These represent the first comprehensive data set of this type for Irish animal production systems. There was generally good agreement between the derived NBMs values and those published in the literature. The NBMs were validated on a number of farms. Data on animal numbers, fertiliser use, concentrates inputs and production output were recorded on seven farms. Using the data a nutrient input/output balance was constructed for each farm. This was compared with the NBM estimate of the farm nutrient balance. The results showed good agreement between the measured balance and the NBM estimate particularly for the pig and poultry farms. However, the validation emphasised the inherent risks associated with NBMs. The average values used for feed intake and production parameters in the NEMs may result in the under or over estimate of actual nutrient balances on individual farms where these variables are substantially different. On the grassland farms there was a poor correlation between the input/output estimate and the NBM. This possibly results from the omission of the soil's contribution to the nutrient balance. However, the results indicate that the NBMs developed are a potentially useful tool for estimating nutrient balances. They also will serve to highlight the significant fraction of the nutrient inputs into farming systems that are retained on the farm. The potential of the NBM as a means of estimating the nutrient composition of farm wastes was evaluated on two farms. Feed intake and composition, animal production, slurry production was monitored during the indoor winter feeding period. Slurry samples were taken for analysis. The appropriates NBMs were used to estimate the nutrient balance for each farm. The nutrient content of the slurry produced was calculated. There was a good agreement between the NBM estimate and the measured values. This preliminary evaluation suggests that the NBM has a potential to provide the farmer with a simple means of estimating the nutrient value of his slurry.
Resumo:
Tourism education in Ireland has witnessed a transformation within the last four decades since CERT introduced the first fundamentals of training in the 1960’s. An analysis of the provision of tourism education in Ireland, focusing on the needs of the public, private and voluntary sectors was the main focus of this study and concentrates mainly on third level provision of tourism education within the island of Ireland. The study examines the role of tourism education in Ireland, establishing any current or emerging trends in third level tourism provision. It identifies and analyses the main stakeholders in the public, private and voluntary sectors and investigates if any requirements exist in the provision of third level education. The multi-faceted nature of the tourism industry has resulted in the provision of a diverse range of educational courses. As a result of this diversity, a question hangs over the status of tourism as a professional discipline within itself. Other issues identified through this study are the over provision of tourism courses and the current and future disparity within tourism education. The qualitative nature of the research involved questioning of major stakeholders and educators who influence tourism education provision and developing an overview of the current status of tourism education provision in Ireland identifying the present needs of each sector. Finally several strategies are suggested which may enhance third level tourism education in the future.
Resumo:
This thesis details the findings of a study into the spatial distribution and speciation of 238U, 226Ra and 228Ra in the soils of the Cronamuck valley, County Donegal . The region lies on the north-eastern edge of the Barnesmore granite and has been the subject of uranium prospecting efforts in the past. The results of the project provide information on the practicability of geostatistical techniques as a means of estimating the spatial distribution of natural radionuclides and provide insight into the behaviour of these nuclides and their modes of occurrence and enrichment in an upland bog environment. The results of the geostatistical survey conducted on the area indicate that the primary control over the levels of the studied nuclides in the soil of the valley is the underlying geology. Isopleth maps of nuclide levels in the valley indicate a predominance of elevated nuclide levels in the samples drawn from the granite region, statistical analysis of the data indicating that levels of the nuclides in samples drawn from the granite are greater than levels drawn from the non-granite region by up to a factor of 4.6 for 238U and 4.9 for 226Ra. Redistribution of the nuclides occurs via drainage systems within the valley, this process being responsible for transport of nuclides away from the granite region resulting in enrichment of nuclides in soils not underlain by the granite. Distribution of the nuclides within the valley is erratic, the effect of drainage f lows on the nuclides resulting in localized enriched areas within the valley. Speciation of the nuclides within one of the enriched areas encountered in the study indicates that enrichment is as a result of saturation of the soil with drainage water containing trace amounts of radionuclides. 238U is primarily held within the labile fractions (exchangeable cat ions + easily oxidisable organics + amorphous iron oxides ) of the soil , 226Ra being associated with the non- labile fractions, most probably the resistant organic material. 228Ra displays a significant occurrence in both the labile and non- labile fractions. The ability of the soil to retain uranium appears to be affected largely by the redox status of the soil, samples drawn from oxidizing environments tending to have little or no uranium in the easily oxidisable and amorphous iron oxide fractions. This loss of uranium from oxidised soil samples is responsible for the elevated 226Ra /238U disequilibrium encountered in the enriched areas of the valley. Analysis of the data indicates that samples displaying elevated 226Ra/238U ratios also exhibit elevated 228Ra/238U ratios indicating a loss of uranium from the samples as opposed to an enrichment of 226Ra.
Resumo:
Construction and demolition waste management is becoming increasingly important on construction sites as landfill space in Ireland is rapidly depleting and waste management costs are rising. Due to these factors waste management plans are seen as a good response to minimising waste on site and this thesis aims to investigate how to implement such a plan on a practical case study as well as investigating the legislation regarding construction and demolition waste along with market availability for the reuse of the waste. Main contractor surveys were also carried out in order to gain a better understanding of current attitudes within the industry and these surveys are analysed in chapter five. A survey was also carried out among sub-contractors but this survey has not been used for this thesis as the study is on-going. The primary aim of this thesis is to examine the waste hierarchy opportunities that are available for construction and demolition waste in Ireland and to examine the effects of management strategies on construction and demolition waste reduction at the project level. A partnership was developed with Carey Developments Ltd in Co. Galway and an analysis of their waste management practices was undertaken. The primary case study will be the ‘Taylors Hill’ project in Co. Galway where work commenced in March, 2012. The secondary aim of the thesis is to develop specific waste minimisation strategies for the company and to develop a training tool kit for use on site.
Resumo:
The purpose of this thesis is to answer the research question ‗why do some Polish migrants engage in shadow employment in the Republic of Ireland?‘ The individual and group interviews, which were conducted in August 2011 with thirteen Polish migrants, living and working in Ireland, generated the answer to the research question. Interviewees‘ responses were analysed from the point of view of the literature that examines the various factors within the topics of migration and the black economy. The thesis begins with theoretical background information regarding the enlargement of the European Union and the economic situation of Poland and Ireland. Then migration theories are explained and Polish and Irish migration history is presented. Next, the issue of the black economy and shadow employment is developed with a focus on its presence in Poland and Ireland. The following section is dedicated to the research methodology that was adopted to ensure effective collection of the information. The issues of the qualitative and quantitative research, phenomenological approach to the research and interviews as data collection are raised in that section. The last part of the thesis is based on an analysis of the respondents‘ statements. It explores interviewees‘ experience of life and work in Ireland. The main part of that section develops the reasons why do Polish workers engage in shadow employment in the Republic of Ireland. Simultaneously, it provides the answers to the research question of this thesis.
Resumo:
Sustainable Development requires appropriate and continuous planning and management of economic, socio cultural and environmental resources. Tourism planning calls for continuous collaboration among tourism agencies, local authorities and local communities for success of the industry. While evidence suggests that tourism planning has been extensively documented, it is apparent that Donegal and Sligo County Councils have, in some cases failed to adequately address the significance of planning of the tourism industry for the North West of Ireland. This was investigated through interviews with chief planners of Donegal and Sligo county councils and was conducted in conjunction with the analysis of county development plans; which were formulated by both organisations involved in this study. Evidence suggests that although tourism is extensively documented by Donegal and Sligo county councils, neither of the two local authorities have developed implementation strategies to facilitate the promotion of sustainable tourism development. This research compares and analyses Donegal and Sligo county councils and how they plan for sustainable tourism development. It outlines the role of the county councils in relation to tourism planning and how Donegal and Sligo compare in how they plan for such a significant industry in the North West o f Ireland. It highlights the importance of implementation tools and methods and offers future directions that can assist in the development of sustainable tourism.
Resumo:
The recruitment of 0-group plaice to sandy beach nursery grounds in Galway Bay was examined, using a Riley push-net, from February to June in 2005 and 2006. Sampling was carried out every two weeks on spring tides. Three beaches were sampled, Ballyloughan, Silverstrand and Glann na Ri. Archived 0-group plaice, for Ballyloughan and Silverstrand, from 2004, were processed. Results were compared to findings from a previous study carried out in 2002 and 2003 (Allen 2004). Otolith microstructure analysis was used to determine hatching dates, larval duration, settlement dates, post-larval age and daily growth rates of 0-group plaice in April and May 2005. Results were compared to a previous study (Allen 2004). Hatching dates in Galway Bay ranged from late January to early April in 2005. No significant difference in hatching dates was observed between years or between beaches sampled. Larval duration of 0-group plaice in Galway Bay ranged from 21 to 45 days for fish sampled in April and May 2005. No significant difference was observed in larval age between beaches sampled in Galway Bay or between years in April 2003 and 2005. A significant difference was observed between larval age and years in May 2003 and 2005, however no significant difference was observed between beaches. Settlement timing was calculated using push-net data and otolith microstructure analysis. Settlement of 0-group plaice in Galway Bay generally started in early March and finished in May. Settlement patterns, calculated using otolith microstructure analysis, in 2003 and 2005, were not significantly different to one another. There was also no difference in settlement patterns between the beaches sampled. Results from the present study showed no spatial difference in the pelagic life cycle stages of fish caught in April and May 2003 and 2005.
Resumo:
Background: Hereditary haemochromatosis is a heritable disorder caused by an inborn error in the metabolism of iron. It results in over absorption of iron by the body, which can manifest clinically as fatigue, arthritis, diabetes and cardiovascular problems. The highest prevalence for the genetic mutations that cause hereditary haemochromatosis can be found in the Irish population. Individuals with diabetes may also have haemochromatosis (and vice versa), due to the bi-directional relationship between iron metabolism and glucose metabolism. Objectives: To determine the incidence of the three haemochromatosis mutations C282Y, H63D & S65C, in a population from the North West of Ireland and to investigate whether there is an increased frequency of these three mutations in a diabetic population from the same region. Method: DNA was extracted from 500 whole blood samples (250 diabetic samples and 250 ‘control’ samples) using a Wizard™ kit. PCR was conducted utilising specific primers for each mutation and in accordance with a set protocol. Following amplification, PCR product was subjected to restriction endonuclease digestion, where different restriction enzymes (Rsa I, Nde II & Hinf I) were employed to determine the HFE genotype status of samples. Results: The incidence of C282Y homozygosity (1/83) and C282Y heterozygosity (1/6) in the ‘control’ group was similar to those reported for the general Irish population (1/83 and 1/5, respectively). Incidences of H63D homozygotes and H63D heterozygotes or ‘carriers’ in the diabetic population were greater than that of the ‘control’ population. A significant finding of this study was that of an incidence of 1/32 S65C carriers in the control population. This is, to our knowledge, the highest incidence of the genotype reported to date in the general Irish population. Statistical analysis showed that there was no significant differences between the HFE genotype frequencies in the Diabetic and Control Populations. Conclusion: Results of the study concord with published literature in terms of C282Y homozygosity and C282Y heterozygosity in the general Irish population. An increased frequency of the H63D mutation in diabetic individuals was also found but was not statistically significant. The biochemical effect of the H63D mutation is still unknown. The significance of such a high incidence of S65C carriers in the ‘control’ population warrants further investigation.
Resumo:
The vulnerability to pollution and hydrochemical variation of groundwater in the mid-west karstic lowlands of Ireland were investigated from October 1992 to September 1993, as part of an EU STRIDE project at Sligo Regional Technical College. Eleven springs were studied in the three local authority areas of Co. Galway, Co. Mayo, and Co. Roscommon. Nine of the springs drain locally or regionally important karstic aquifers and two drain locally important sand and gravel aquifers. The maximum average daily discharge of any of the springs was 16,000 m3/day. Determination of the vulnerability of groundwater to pollution relies heavily on an examination of subsoil deposits in an area since they can act as a protecting or filtering layer over groundwater. Within aquifers/spring catchments, chemical reactions such as adsorption, solution-precipitation or acid-base reactions occur and modify the hydrochemistry of groundwater (Lloyd and Heathcote, 1985). The hydrochemical processes) that predominate depend cm the mineralogy of the aquifer, the hydrogeological environment, the overlying subsoils, and the history of groundwater movement. The aim of this MSc research thesis was to investigate the hydrochemical variation of spring outflow and to assess the relationship between these variations and the intrinsic vulnerability of the springs and their catchments. If such a relationship can be quantified, then it is hoped that the hydrochemical variation of a spring may indicate the vulnerability of a spring catchment without the need for determining it by field mapping. Such a method would be invaluable to any of the three local authorities since they would be able to prioritise sources that are most at risk from pollution, using simple techniques of chemical sampling, and statistical analysis. For each spring a detailed geological, hydrogeological and hydrochemical study was carried out. Individual catchment areas were determined with a water balance/budget and groundwater tracing. The subsoils geology for each spring catchment were mapped at the 1:10,560 scale and digitised to the 1:25,000 scale with AutoCad™ and Arclnfo™. The vulnerability of each spring was determined using the Geological Survey's vulnerability guidelines. Field measurements and laboratory based chemistry analyses of the springs were undertaken by personnel from both the EPA Regional Laboratory in Castlebar, Co. Mayo, and the Environment Section of Roscommon Co. Council. Electrical conductivity and temperature (°C) were sampled fortnightly, in the field, using a WTW microprocessor conductivity meter. A percentage (%) vulnerability was applied to each spring in order to indicate the areal extent of the four main classes of vulnerability (Extreme, High, Moderate, and Low) which occurred within the confines of each spring catchment. Hydrochemical variation for the springs were presented as the coefficient of variation of electrical conductivity. The results of this study show that a clear relationship exists between the degree of vulnerability of each catchment area as defined by the subsoil cover and the coefficient of variation of EC, with the coefficient of variation increasing as the vulnerability increases. The coefficient of variation of electrical conductivity is considered to be a parameter that gives a good general reflection of the degree of vulnerability occurring in a spring catchment in Ireland's karstic lowlands.
Resumo:
The aim of the project was to determine the extent and quality of the groundwater in Tipperary South Riding with a view to developing a groundwater protection plan which would allow the Local Authority to manage, protect and develop the groundwater as efficiently as possible. The geology of the area varies with topography. The low-lying areas of the county comprise mainly Carboniferous limestones while the elevated regions consist of sandstones and shales of Upper Carboniferous, Devonian and Silurian ages. Deformation of these rocks decreases in magnitude moving northwards over the area; the Southern Synclines having suffered the effects of the Hercynian orogeny and the northern region exhibiting Caledonian orogenic trends. Quaternary (subsoil) deposits are found throughout the area and are of variable thickness and permeability. Till is the most widespread deposit with discontinuous pockets of sand and gravel in various proportions, and some marl, alluvium and peat in places. The principal aquifers of the area are the Kiltorcan sandstone formation and various limestone units within the Carboniferous succession. 50 % of south Tipperary constitutes either regionally or locally important aquifers. Secondary permeabilities created by structural deformation, dolomitisation, karstification and weathering processes create high transmissivities and often have large well yields. Specific baseflow analysis highlighted the complexity of the aquifers and proved that the lower part of the Suir river system is a major groundwater resource region. The hydrochemistry and water quality of the local authority groundwater sources was examined briefly. The majority of south Tipperary is underlain by limestone or Quaternary deposits derived from limestone and, consequently, calcium/magnesium bicarbonate waters predominate. The quality of the groundwater in south Tipperary demonstrates that the main concern originates from the presence of E.coli, and Total coliforms. The primary sources of contamination are from farmyard wastes and septic tanks. The vulnerability of groundwater to diffuse and point sources of pollution has been found to be dependent on the overlying soil, subsoil and the thickness of the unsaturated zone. A conceptual rather than quantitative approach is used and it is found that approximately 60% of south Tipperary is designated as being extremely or highly vulnerable. The groundwater protection plan was devised subsequent to an understanding of the aquifer systems, an assessment of the vulnerability, and a review of the Irish planning system and environmental law. It is recommended that the plan be integrated into the county development plan for legislative purposes. A series of acceptability matrices were devised to restrict potentially polluting activities in vulnerable areas while maintaining a balance between protection of the groundwater resource and the need to site essential developments.
Resumo:
In Ireland the average energy cost for a household in 2006 was estimated to be €1,767, an increase of 4% on 2005 figures. With the state o f the current economic climate, home owners are beginning to realise the potential of energy efficient construction methods. The Passive House Standard offers a cost efficient and sustainable construction solution compared to the Traditional Irish construction methods. This report focuses on the Cost comparison between Passive House construction and traditional construction methods. The report also focuses on barriers that are slowing market penetration of the Passive House standard in the Irish Market. It also identifies potential energy savings that passive house occupants would benefit from. The report also highlights professional opinions on the future development o f the Passive House Standard in Ireland. The conclusions of this report are that the Passive House Standard is a more financially suitable construction solution compared to that o f a traditional dwelling complying with the Irish Building Regulations. The report also concludes that the Passive House Standard won’t be introduced as an Irish Building Regulation in the future but that it will have a big impact on future building regulations. The hypothesis o f this report is supported by data obtained from a literature review, qualitative data analysis and a case study. The report recommends that in order for the Passive House Standard to penetrate further into the Irish construction market, various barriers must be rectified. Local manufactures must start producing suitable components that suit the Passive House specification. The Building Energy Rating system must be altered in order for the Passive House to achieve its potential BER rating.
Resumo:
The main objective of this thesis on flooding was to produce a detailed report on flooding with specific reference to the Clare River catchment. Past flooding in the Clare River catchment was assessed with specific reference to the November 2009 flood event. A Geographic Information System was used to produce a graphical representation of the spatial distribution of the November 2009 flood. Flood risk is prominent within the Clare River catchment especially in the region of Claregalway. The recent flooding events of November 2009 produced significant fluvial flooding from the Clare River. This resulted in considerable flood damage to property. There were also hidden costs such as the economic impact of the closing of the N17 until floodwater subsided. Land use and channel conditions are traditional factors that have long been recognised for their effect on flooding processes. These factors were examined in the context of the Clare River catchment to determine if they had any significant effect on flood flows. Climate change has become recognised as a factor that may produce more significant and frequent flood events in the future. Many experts feel that climate change will result in an increase in the intensity and duration of rainfall in western Ireland. This would have significant implications for the Clare River catchment, which is already vulnerable to flooding. Flood estimation techniques are a key aspect in understanding and preparing for flood events. This study uses methods based on the statistical analysis of recorded data and methods based on a design rainstorm and rainfall-runoff model to estimate flood flows. These provide a mathematical basis to evaluate the impacts of various factors on flooding and also to generate practical design floods, which can be used in the design of flood relief measures. The final element of the thesis includes the author’s recommendations on how flood risk management techniques can reduce existing flood risk in the Clare River catchment. Future implications to flood risk due to factors such as climate change and poor planning practices are also considered.
Resumo:
Surgeons may use a number of cutting instruments such as osteotomes and chisels to cut bone during an operative procedure. The initial loading of cortical bone during the cutting process results in the formation of microcracks in the vicinity of the cutting zone with main crack propagation to failure occuring with continued loading. When a material cracks, energy is emitted in the form of Acoustic Emission (AE) signals that spread in all directions, therefore, AE transducers can be used to monitor the occurrence and development of microcracking and crack propagation in cortical bone. In this research, number of AE signals (hits) and related parameters including amplitude, duration and absolute energy (abs-energy) were recorded during the indentation cutting process by a wedge blade on cortical bone specimens. The cutting force was also measured to correlate between load-displacement curves and the output from the AE sensor. The results from experiments show AE signals increase substantially during the loading just prior to fracture between 90% and 100% of maximum fracture load. Furthermore, an amplitude threshold value of 64dB (with approximate abs-energy of 1500 aJ) was established to saparate AE signals associated with microcracking (41 – 64dB) from fracture related signals (65 – 98dB). The results also demonstrated that the complete fracture event which had the highest duration value can be distinguished from other growing macrocracks which did not lead to catastrophic fracture. It was observed that the main crack initiation may be detected by capturing a high amplitude signal at a mean load value of 87% of maximum load and unsteady crack propagation may occur just prior to final fracture event at a mean load value of 96% of maximum load. The author concludes that the AE method is useful in understanding the crack initiation and fracture during the indentation cutting process.
Resumo:
This study analyses the area of construction and demolition waste (C & D W) auditing. The production of C&DW has grown year after year since the Environmental Protection Agency (EPA) first published a report in 1996 which provided data for C&D W quantities for 1995 (EPA, 1996a). The most recent report produced by the EPA is based on data for 2005 (EPA, 2006). This report estimated that the quantity of C&DW produced for that period to be 14 931 486 tonnes. However, this is a ‘data update’ report containing an update on certain waste statistics so any total provided would not be a true reflection of the waste produced for that period. This illustrates that a more construction site-specific form of data is required. The Department of Building and Civil Engineering in the Galway-Mayo Institute of Technology have carried out two recent research projects (Grimes, 2005; Kelly, 2006) in this area, which have produced waste production indicators based on site-specific data. This involved the design and testing of an original auditing tool based on visual characterisation and the application of conversion factors. One of the main recommendations of these studies was to compare this visual characterisation approach with a photogrammetric sorting methodology. This study investigates the application of photogrammetric sorting on a residential construction site in the Galway region. A visual characterisation study is also carried out on the same project to compare the two methodologies and assess the practical application in a construction site environment. Data collected from the waste management contractor on site was also used to provide further evaluation. From this, a set of waste production indicators for new residential construction was produced: □ 50.8 kg/m2 for new residential construction using data provided by the visual characterisation method and the Landfill Levy conversion factors. □ 43 kg/m2 for new residential construction using data provided by the photogrammetric sorting method and the Landfill Levy conversion factors. □ 23.8 kg/m2 for new residential construction using data provided by Waste Management Contractor (WMC). The acquisition of the data from the waste management contractor was a key element for testing of the information produced by the visual characterisation and photogrammetric sorting methods. The actual weight provided by the waste management contractor shows a significant difference between the quantities provided.