Application of multivariate statistical process control to fuel cell manufacturing

Univariate statistical control charts, such as the Shewhart chart, do not satisfy the requirements for process monitoring on a high volume automated fuel cell manufacturing line. This is because of the number of variables that require monitoring. The risk of elevated false alarms, due to the nature of the process being high volume, can present problems if univariate methods are used. Multivariate statistical methods are discussed as an alternative for process monitoring and control. The research presented is conducted on a manufacturing line which evaluates the performance of a fuel cell. It has three stages of production assembly that contribute to the final end product performance. The product performance is assessed by power and energy measurements, taken at various time points throughout the discharge testing of the fuel cell. The literature review performed on these multivariate techniques are evaluated using individual and batch observations. Modern techniques using multivariate control charts on Hotellings T2 are compared to other multivariate methods, such as Principal Components Analysis (PCA). The latter, PCA, was identified as the most suitable method. Control charts such as, scores, T2 and DModX charts, are constructed from the PCA model. Diagnostic procedures, using Contribution plots, for out of control points that are detected using these control charts, are also discussed. These plots enable the investigator to perform root cause analysis. Multivariate batch techniques are compared to individual observations typically seen on continuous processes. Recommendations, for the introduction of multivariate techniques that would be appropriate for most high volume processes, are also covered.

In search of a language textile and text in contemporary women's art

This research uses the textile/text axis concept as a conceptual tool to investigate the role of textile and text in contemporary women’s art practice and theorizing, investigating textile as a largely hitherto unacknowledged element in women’s art practice of the late 20th and early 21st centuries. Textile and text share a common etymological root, from the Latin textere to weave, textus a fabric. The thesis illuminates the pathways whereby textile and text played an important role in women reclaiming a speaking voice as creators of culture and signification during a revolutionary period of renewal in women’s cultural contribution and positioning. The methodological approach used in the research consisted of a comprehensive literature review, the compilation of an inventory of relevant women artists, developing a classificatory system differentiating types of approaches, concerns and concepts underpinning women’s art practice vis a vis the textile/text axis and a series of three in-depth case studies of artists Tracey Emin, Louise Bourgeois and Faith Ringgold. The thesis points to the fact that contemporary women artists and theorists have rounded their art practice and aesthetic discourse in textile as prime visual metaphor and signifier, turning towards the ancient language of textile not merely to reclaim a speaking voice but to occupy a ground breaking locus of signification and representation in contemporary culture. The textile/text axis facilitated women artists in powerfully countering a culturally inscribed status of Lacanian ‘no-woman’ (a position of abjection, absence and lack in the phallocentric symbolic). Turning towards a language of aeons, textile as fertile wellspring, the thesis identifies the methodologies and strategies whereby women artists have inserted their webs of subjectivities and deepest concerns into the records and discourses of contemporary culture. Presenting an anatomy of the textile/text axis, the thesis identifies nine component elements manifesting in contemporary women’s aesthetic practice and discourse. In this cultural renaissance, the textile/text axis, the thesis suggests, served as a complex lexicon, a system of labyrinthine references and signification, a site of layered meanings and ambiguities, a body proxy and a corporeal cartography, facilitating a revolution in women’s aesthetic praxis.

Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.