Synchronous reproduction may facilitate introgression in a hybrid mussel (Mytilus) population

Mussel populations on the Irish Atlantic coast comprise an interbreeding mixture of the blue mussel, Mytilus edulis (L.) and the Mediterranean mussel, Mytilus galloprovincialis (Lmk.). The occurrence of hybrid genotypes varies between sites but can be as high 80%. This study compares the reproductive cycle of M. edulis, M. galloprovincialis and their hybrids to determine if the extensive hybridisation observed at Irish Atlantic coast sites is linked to spawning synchrony between the two taxa. Mussels (40-45 mm size class) were collected monthly from a sheltered shore in Galway Bay from January to December 2005. Two major spawning events (March- June and September-October) were observed and gametogenesis took place throughout the year. The spawning cycles of the three taxa were largely overlapping. Small differences were observed in the timing of peak spawning which occurred in March and October in M. galloprovincialis and in May-June and September in M.edulis. Spawning of hybrid individuals was intermediate between the parental genotypes. Fecundity was slightly higher in M. galloprovincialis females compared to the other taxa (up to 30% difference, p<0.05). This apparent advantage is not shared by the sexes and is likely being offset by high numbers of hybrid genotypes releasing gametes during peak spawning of M. galloprovincialis. There was no evidence for increased mortality in hybrid males; sex ratios did not deviate from the 1:1 ratio. The results show that in this region of the hybrid zone the timing of reproduction does not present a barrier to gene flow between M. edulis and M. galloprovincialis. Nonetheless, small differences in the timing of peak spawning may increase the likelihood of conspecific fertilisation at certain times of the year. Hybrids outnumber the parental genotypes, undergo complete gametogenesis and show no evidence of depressed fitness (i.e. hybrids are reproductively competent suggesting a high degree of introgression.

Ireland’s understudied flatfish: reproduction, age and growth of the dab Limanda limanda (L.) in Irish coastal waters

In Ireland, although flatfish form a valuable fishery, little is known about the smallest, the dab Limanda limanda. In this study, a variety of parameters of reproductive development, including ovarian phase description, gonadosomatic index (GSI), hepatosomatic index (HSI), relative condition (Kn) and oocyte size were analysed to provide information on the dab’s reproductive cycle and spawning periods. Sampling were collected monthly over an 18-month period using bottom trawls of the Irish coastline. A six phase macroscopic guide was developed for both sexes of dab, and verified using histology. In comparisons of macroscopic and microscopic phases, there was high agreement in the proposed female guide (86%), with males demonstratively lower (62%). No significant bias was observed between the the two reproductive methods. When the male macroscopic guide was examined, misclassification was high in phase 5 and phase 5 (41%), with 96% of misclassification occurring in adjacent phases. The sampled population was primarily composed of females, with ratios of females to males 1:0.6, although the predominance of females was less noticeable during the reproductive season. Oocyte growth in dab follows asynchronous development, and spawn over a protracted period indicating a batch spawning strategy. Spawning occurred mainly in early spring, with total regeneration of gonads by May. The length at which 50% of the population was reproductively mature was identified as 14cm and 17cm, for male and female dab, respectively. Precision and bias in age determinations using whole otoliths to age dab was investigated using six age readers from various institutions. Low levels of precision were obtained (CV: 10-23%) inferring the need for an alternative methodology. Precision and bias was influence by the level of experience of the reader, with ageing error attributed to interpretative differences and difficulty in edge determination. Sectioned otolith age determinations were subsequently compared to whole otolith age determinations using two age readers experienced in dab ageing. Although increased precision was observed in whole otoliths from previous estimates (CV=0%, 0% APE), sectioned otoliths were used for growth models. This was based on multinominal logistic regression on age length keys developed using both ageing methods. Biological data (length and age) for both sexes was applied to four growth models, where the Akaike criterion and Multi model Inference indicated the logistic model as having the best fit to the collected data. In general, female dab attained a longer length then males, with growth rates significantly different between the two sexes. Length weight relationships between the two sexes were also significantly different.

Training and development in Irish technology companies

The sustained economic growth that has been experienced in the Irish economy in recent years has relied, to a large extent, on the contribution and performance of those industry sectors that possess the ability to provide high-value-added products and services to domestic and international markets. One such contributor has been the Technology sector. However, the performance of this sector relies upon the availability of the necessary capabilities and competencies for Technology companies to remain competitive. The Expert Group on Future Skills Needs have forecasted future skills shortages in this sector. The purpose of this research has been to examine the extent to which Irish Technology companies are taking measures to meet changing skills requirements, through training and development interventions. Survey research methods (in the form of a mail questionnaire, supported by a Web-based questionnaire) have been used to collect information on the expenditure on, and approach to, training and development in these companies, in addition to the methods, techniques and tools/aids that are used to support the delivery of these activities. The contribution of Government intervention has also been examined. The conclusions have been varied. When the activities of the responding companies are considered in isolation, the picture to emerge is primarily positive. Although the expenditure on training and development is slightly lower than that indicated in previous studies, the results vary by company size. Technical employees are clearly the key focus of training provision, while Senior Managers and Directors, Clerical and Administrative staff and Manual workers are a great deal more neglected in training provision. Expenditure on, and use of, computer-based training methods is high, as is the use of most of the specified techniques for facilitating learning. However, when one considers the extent to which external support (in the form of Government interventions and cooperation with other companies and with education and training providers) is integrated into the overall training practices of these companies, significant gaps in practice are identified. The thesis concludes by providing a framework to guide future training and development practices in the Technology sector.

Development of a data acquisition system to characterise sustainable energy technologies and to support Web-Based learning (DAQ-WBL)

Driven by concerns about rising energy costs, security of supply and climate change a new wave of Sustainable Energy Technologies (SET’s) have been embraced by the Irish consumer. Such systems as solar collectors, heat pumps and biomass boilers have become common due to government backed financial incentives and revisions of the building regulations. However, there is a deficit of knowledge and understanding of how these technologies operate and perform under Ireland’s maritime climate. This AQ-WBL project was designed to address both these needs by developing a Data Acquisition (DAQ) system to monitor the performance of such technologies and a web-based learning environment to disseminate performance characteristics and supplementary information about these systems. A DAQ system consisting of 108 sensors was developed as part of Galway-Mayo Institute of Technology’s (GMIT’s) Centre for the Integration of Sustainable EnergyTechnologies (CiSET) in an effort to benchmark the performance of solar thermal collectors and Ground Source Heat Pumps (GSHP’s) under Irish maritime climate, research new methods of integrating these systems within the built environment and raise awareness of SET’s. It has operated reliably for over 2 years and has acquired over 25 million data points. Raising awareness of these SET’s is carried out through the dissemination of the performance data through an online learning environment. A learning environment was created to provide different user groups with a basic understanding of a SET’s with the support of performance data, through a novel 5 step learning process and two examples were developed for the solar thermal collectors and the weather station which can be viewed at http://www.kdp 1 .aquaculture.ie/index.aspx. This online learning environment has been demonstrated to and well received by different groups of GMIT’s undergraduate students and plans have been made to develop it further to support education, awareness, research and regional development.

Age, growth and reproductive biology of whiting Merlangius merlangus (Linnaeus 1758) in the Celtic Sea

Age, growth and reproductive biology were investigated for whiting (Merlangius merlangus) captured from the Celtic Sea (ICES division Vllg), for the period January 2001 to January 2002. Females dominated the sex ratio of 1: 2.25. The relative abundance of females exceeded the number of males in all length classes. The relationship between weight (g) and total length (cm) was the same for male and female whiting. A total of 973 fish were aged and the maximum age recorded was 11 years. Results from an intercalibration exercise showed 87% agreement in age readings between the author and an expert in ageing whiting at the Marine Institute. Females were dominated by 2 year olds, while males were dominated by 3 year olds. Lx was estimated as 38cm and a growth rate was calculated K = 0.3769 year'1. Females were fully recruited to the fishery at 3 years of age, while the age at full recruitment (tr) for males was 4 years. Female whiting spawned from late February to June 2001 and matured at a total length of 23 cm in their first year. Female whiting reached L5o at a total length of 28 cm and 2.7 years of age. Male whiting spawned from February to June 2001. They matured at a total length of 21 cm and in their first year. Male whiting reached L50 at a total length of 30.4 cm and 3.6 years of age. The following critical points should be taken into account in the management of the Celtic Sea whiting stock: An Fpa should be established in order to assess the current level of fishing mortality; The maturity ogives need further study; The extent of gutting of large fish before landing by fishers in the fleet should be investigated and the apparent decline in size of 4 - 7 year old fish in the Celtic Sea between 1996 and 2001 needs to be assessed.

Implementation of a customer relationship management system in an SME

The research conducted for this thesis has been carried out over a two year period as part of the Mobile Tools and Technology for customer care (MOTTO) project. The project was funded under the Applied Grant scheme administered by Enterprise Ireland and Nortel Networks Ltd. It was a partnership project between Galway-Mayo Institute of Technology, University of Limerick, National University of Ireland Galway, and a global Internet and communications company, Nortel Networks. The project aimed to investigate the enabling mobile communications technologies in e-Business and mobile communications in the area of Business-to-Business (B2B) customer care. The development of the application discussed in this thesis was developed in conjunction with the Galway-Mayo Institute of Technology, University of Limerick and AMT Ireland. The decision to develop the application in the Electronics Company of AMT in Limerick came about as a result of the contact established by Mark Southern from the University of Limerick. Mark was involved in overseeing the development and assisted in establishing the user requirements.

Data for the sustainable management of an emerging fishery: Age, growth and stock structure of Atlantic saury Scomberesox saurus saurus (Walbaum), in the Northeastern Atlantic Ocean

Almost half of Ireland’s commercial stocks face overexploitation. As traditional species decrease in abundance and become less profitable, the industry is increasingly turning to alternate species. Atlantic saury (Scomberesox saurus saurus (Walbaum)) has been identified as a potential species for exploitation. Very little information is available on its biology or population dynamics, especially for Irish waters. This thesis aims to obtain sound scientific data, which will help to ensure that a future Atlantic saury fishery can be sustainably managed. The research has produced valuable data, some of which contradicts previous studies. Growth of Atlantic saury measured using otolith microstructure is found to be more than twice that previously calculated from annual structures on scales and otoliths. This results in a significant reduction of the expected life span from five to about two years. Investigation of maturity stage at age indicates that Atlantic saury will reproduce for the first time at age one and will survive for one or at most two reproduction seasons. It is concluded that a future Irish fishery will target mostly fish prior to their first reproduction. Finally the thesis gives some insights into the population structure of Atlantic saury, by analysis of otolith morphometric. Significant differences are detected between Northeastern Atlantic and western Mediterranean Sea specimens of the 0+ age class (less than one year old). The implications of these results for the management of an emerging fishery are discussed.

Optimisation of a surface mount technology process using a SnAgCu lead-free alloy

The impending introduction of lead-free solder in the manufacture of electrical and electronic products has presented the electronics industry with many challenges. European manufacturers must transfer from a tin-lead process to a lead-free process by July 2006 as a result of the publication of two directives from the European Parliament. Tin-lead solders have been used for mechanical and electrical connections on printed circuit boards for over fifty years and considerable process knowledge has been accumulated. Extensive literature reviews were conducted on the topic and as a result it was found there are many implications to be considered with the introduction of lead-free solder. One particular question that requires answering is; can lead-free solder be used in existing manufacturing processes? The purpose of this research is to conduct a comparative study of a tin-lead solder and a lead-free solder in two key surface mount technology (SMT) processes. The two SMT processes in question were the stencil printing process and the reflow soldering process. Unreplicated fractional factorial experimental designs were used to carry out the studies. The quality of paste deposition in terms of height and volume were the characteristics of interest in the stencil printing process. The quality of solder joints produced in the reflow soldering experiment was assessed using x-ray and cross sectional analysis. This provided qualitative data that was then uniquely scored and weighted using a method developed during the research. Nested experimental design techniques were then used to analyse the resulting quantitative data. Predictive models were developed that allowed for the optimisation of both processes. Results from both experiments show that solder joints of comparable quality to those produced using tin-lead solder can be produced using lead-free solder in current SMT processes.