13 resultados para screening of mechanical pulp


Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação para obtenção do Grau de Doutor em Química, especialidade Química Orgânica

Relevância:

100.00% 100.00%

Publicador:

Resumo:

In the context of this dissertation several studies were developed resulting in submission and publication “Evaluation of mechanical soft-abrasive blasting and chemical cleaning methods on alkyd-paint graffiti made on calcareous stones” to Journal of Cultural Heritage. (http://dx.doi.org/10.101 /j.culher.2014.10.004)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This study focus on the probabilistic modelling of mechanical properties of prestressing strands based on data collected from tensile tests carried out in Laboratório Nacional de Engenharia Civil (LNEC), Portugal, for certification purposes, and covers a period of about 9 years of production. The strands studied were produced by six manufacturers from four countries, namely Portugal, Spain, Italy and Thailand. Variability of the most important mechanicalproperties is examined and the results are compared with the recommendations of the ProbabilisticModel Code, as well as the Eurocodes and earlier studies. The obtained results show a very low variability which, of course, benefits structural safety. Based on those results, probabilistic modelsfor the most important mechanical properties of prestressing strands are proposed.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Considering the fundamental importance of preserving the built heritage and of ensuring the good performance achieved by incorporating ceramic particles in lime mortars in ancient times, it is important to study solutions that use materials the available today, in order to produce mortars intended to repair and replace the old ones. Solutions incorporating industrial ceramic waste might be profitable for several reasons, namely for economic, environmental and technical aspects. In this paper, seven ceramic waste products collected from ceramics factories are characterized. Their mineralogy, dimensional features and pozzolanicity were determined. Three of these products, with different particle size fractions (obtained directly from milling, dust only and fragment fractions only), were selected, incorporated into air lime mortars, and their mechanical strength was determined. In the present work, evidence of mechanical efficiency, when common sand or air lime were partially replaced by ceramic wastes, was made clear, drawing attention to the sustainability of this type of mortars, hence, encouraging further research.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Tissue engineering arises from the need to regenerate organs and tissues, requiring the development of scaffolds, which can provide an optimum environment for tissue growth. In this work, chitosan with different molecular weights was used to develop biodegradable 3D inverted colloidal crystals (ICC) structures for bone regeneration, exhibiting uniform pore size and interconnected network. Moreover, in vitro tests were conducted by studying the influence of the molecular weight in the degradation kinetics and mechanical properties. The production of ICC included four major stages: fabrication of microspheres; assembly into a cohesive structure, polymeric solution infiltration and microsphere removal. Chitosan’s degree of deacetylation was determined by infrared spectroscopy and molecular weight was obtained via capillary viscometry. In order to understand the effect of the molecular weight in ICC structures, the mass loss and mechanical properties were analyzed after degradation with lysozyme. Structure morphology observation before and after degradation was performed by scanning electron microscopy. Cellular adhesion and proliferation tests were carried out to evaluate ICC in vitro response. Overall, medium molecular weight ICC revealed the best balance in terms of mechanical properties, degradation rate, morphology and biological behaviour.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Resumo: Com base no conceito de implementação de intenções (Gollwitzer, 1993, 1999) e na teoria do contexto de resposta de Kirsch & Lynn (1997), o presente trabalho testou a eficácia de uma intervenção combinada de implementação de intenções com hipnose e sugestão pós-hipnótica na promoção da adesão a uma tarefa simples (avaliação do humor) e uma tarefa difícil (actividade física). Os participantes são estudantes universitários de uma universidade na Nova Jérsia, (N=124, Estudo 1, EUA) e em Lisboa (N=323, Estudo 2, Portugal). Em ambos os estudos os participantes foram seleccionados a partir de uma amostra mais vasta baseado num escrutínio da sua sugestibilidade hipnótica avaliada por meio da Escala de Grupo de Sugestibilidade Hipnótica de Waterloo-Stanford (WSGC): Forma C. O Estudo 1 usou um desenho factorial do tipo 2x2x3 (tipo de intenção formada x hipnose x nível de sugestionabilidade) e o Estudo 2 usou um desenho factorial do tipo 2 x 2x 2 x 4 (tipo de tarefa x tipo de intenção formada x hipnose x nível de sugestionabilidade). No Estudo 1 foi pedido aos participantes que corressem todos os dias e durante três semanas durante 5 minutos, que medissem a sua pulsação antes e depois da actividade física e que mandassem um e-mail ao experimentador, fornecendo assim uma medida comportamental e uma medida de auto-relato. Aos participantes no grupo de intenções de meta foi apenas pedido que corressem todos os dias. Aos participantes no grupo de implementação de intenções foi pedido que especificasses com exactidão quando e onde iriam correr e enviar o e-mail. Para além disso, cerca de metade dos participantes foram hipnotizados e receberam uma sugestão pós-hipnótica em que lhes foi sugerido que o pensamento de correr todos os dias lhes viria à mente sem esforço no momento apropriado. A outra metade dos participantes não recebeu qualquer sugestão hipnótica. No Estudo 2 foi seguido o mesmo procedimento, mas a cerca de metade dos participantes foi atribuída uma tarefa fácil (enviar um Adherence to health-related behaviors ix SMS com a avaliação diária do seu estado de humor naquele momento) e à outra metade da amostra foi atribuída a tarefa de exercício físico atrás descrita (tarefa difícil). Os resultados do estudo 1 mostraram uma interacção significativa entre o nível de sugestionabilidade dos participantes e a sugestão pós-hipnótica (p<.01) indicando que a administração da sugestão pós-hipnótica aumentou a adesão nos participantes muito sugestionáveis, mas baixou a adesão nos participantes pouco sugestionáveis. Não se encontraram diferenças entre os grupos que formaram intenções de meta e os que formaram implementação de intenções. No Estudo 2 os resultados indicaram que os participantes aderiram significativamente mais à tarefa fácil do que à tarefa difícil (p<.001). Os resultados não revelaram diferenças significativas entre as condições implementações de intenções, hipnose e as duas estratégias combinadas, indicando que a implementação de intenções não foi eficaz no aumento da adesão às duas tarefas propostas e não beneficiou da combinação com as sugestões pós-hipnóticas. A utilização da hipnose com sugestão pós-hipnótica significativamente reduziu a adesão a ambas as tarefas. Dado que não existiam instrumentos em Português destinados a avaliar a sugestionabilidade hipnótica, traduziu-se e adaptou-se para Português Escala de Grupo de sugestibilidade hipnótica de Waterloo-Stanford (WSGC): Forma C. A amostra Portuguesa (N=625) apresentou resultados semelhantes aos encontrados nas amostras de referência em termos do formato da distribuição dos padrões da pontuação e do índice de dificuldade dos itens. Contudo, a proporção de estudantes portugueses encontrada que pontuaram na zona superior de sugestionabilidade foi significativamente inferior à proporção de participantes na mesma zona encontrada nas amostras de referência. No sentido de lançar alguma luz sobre as razões para este resultado, inquiriu-se alguns dos participantes acerca das suas atitudes face à hipnose utilizando uma versão portuguesa da Escala de Valência de Atitudes e Crenças face à Hipnose e comparou-se com a opinião de Adherence to health-related behaviors xAbstract: On the basis of Gollwitzer’s (1993, 1999) implementation intentions’ concept, and Kirsch & Lynn’s (1997) response set theory, this dissertation tested the effectiveness of a combined intervention of implementation intentions with hypnosis with posthypnotic suggestions in enhancing adherence to a simple (mood report) and a difficult (physical activity) health-related task. Participants were enrolled in a university in New Jersey (N=124, Study 1, USA) and in two universities in Lisbon (N=323, Study 2, Portugal). In both studies participants were selected from a broader sample based on their suggestibility scores using the Waterloo-Stanford Group C (WSGC) scale of hypnotic susceptibility and then randomly assigned to the experimental groups. Study 1 used a 2x2x3 factorial design (instruction x hypnosis x level of suggestibility) and Study 2 used a 2 x 2x 2 x 4 factorial design (task x instructions x hypnosis x level of suggestibility). In Study 1 participants were asked to run in place for 5 minutes each day for a three-week period, to take their pulse rate before and after the activity, and to send a daily email report to the experimenter, thus providing both a self-report and a behavioral measure of adherence. Participants in the goal intention condition were simply asked to run in place and send the e-mail once a day. Those in the implementation intention condition were further asked to specify the exact place and time they would perform the physical activity and send the e-mail. In addition, half of the participants were given a post-hypnotic suggestion indicating that the thought of running in place would come to mind without effort at the appropriate moment. The other half did not receive a posthypnotic suggestion. Study 2 followed the same procedure, but additionally half of the participants were instructed to send a mood report by SMS (easy task) and half were assigned to the physical activity task described above (difficult task). Adherence to health-related behaviors vii Study 1 result’s showed a significant interaction between participant’s suggestibility level and posthypnotic suggestion (p<.01) indicating that posthypnotic suggestion enhanced adherence among highly suggestible participants, but lowered it among low suggestible individuals. No differences between the goal intention and the implementation intentions groups were found. In Study 2, participants adhered significantly more (p<.001) to the easy task than to the difficult task. Results did not revealed significant differences between the implementation intentions, hypnosis and the two conditions combined, indicating that implementation intentions was not enhanced by hypnosis with posthypnotic suggestion, neither was effective as single intervention in enhancing adherence to any of the tasks. Hypnosis with posthypnotic suggestion alone significantly reduced adherence to both tasks in comparison with participants that did not receive hypnosis. Since there were no instruments in Portuguese language to asses hypnotic suggestibility, the Waterloo-Stanford Group C (WSGC) scale of hypnotic susceptibility was translated and adapted to Portuguese and was used in the screening of a sample of college students from Lisbon (N=625). Results showed that the Portuguese sample has distribution shapes and difficulty patterns of hypnotic suggestibility scores similar to the reference samples, with the exception of the proportion of Portuguese students scoring in the high range of hypnotic suggestibility, that was found lower than the in reference samples. In order to shed some light on the reasons for this finding participant’s attitudes toward hypnosis were inquired using a Portuguese translation and adaptation of the Escala de Valencia de Actitudes y Creencias Hacia la Hipnosis, Versión Cliente, and compared with participants with no prior hypnosis experience (N=444). Significant differences were found between the two groups with participants without hypnosis experience scoring higher in factors indicating misconceptions and negative attitudes about hypnosis.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertation submitted to Faculdade de Ciências e Tecnologia - Universidade Nova de Lisboa in fulfilment of the requirements for the degree of Doctor of Philosophy (Biochemistry - Biotechnology)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Durability of Building Materials and Components (Vasco Peixoto de de Freitas, J.M.P.Q. Delgado, eds.), Building Pathology and Rehabilitation, vol. 3, VIII, 105-126. ISBN: 978-3-642-37474-6 (Print) 978-3-642-37475-3 (Online). Springer-Verlag Berlin Heidelberg. DOI: 10.1007/978-3-642-37475-3_5

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertation to obtain master degree in Biotechnology

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Dissertação para obtenção do grau de Mestre em Genética Molecular e Biomedicina

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Clayish earth-based mortars are been recognized, all over the world, as eco-efficient products for plastering. Apart from being a product with low embodied energy when compared to other types of plasters, their application on the interior surface of walls may give a strong contribution for the health and comfort of inhabitants. As part of an ongoing research regarding earth-based plasters this work assesses the influence of the addition of two types of natural fibres – oat straw and typha fiber-wool – on the characteristics of plastering mortars made with a clayish earth. Mechanical and physical characteristics were tested, showing that addition of these fibers contribute to decrease linear drying shrinkage and thermal conductivity, as well as promoting the adhesion strength of plaster to the substrate. The improvement of mechanical resistance reveal to be dependent on the type of fiber added while the hygroscopic capacity of the plaster is maintained regardless of the fiber additions.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

This thesis was focused on the production, extraction and characterization of chitin:β-glucan complex (CGC). In this process, glycerol byproduct from the biodiesel industry was used as carbon source. The selected CGC producing yeast was Komagataella pastoris (formerly known as Pichia pastoris), due the fact that to achieved high cell densities using as carbon source glycerol from the biodiesel industry. Firstly, a screening of K. pastoris strains was performed in shake flask assays, in order to select the strain of K. pastoris with better performance, in terms of growth, using glycerol as a carbon source. K. pastoris strain DSM 70877 achieved higher final cell densities (92-97 g/l), using pure glycerol (99%, w/v) and in glycerol from the biodiesel industry (86%, w/v), respectively, compared to DSM 70382 strain (74-82 g/l). Based on these shake flask assays results, the wild type DSM 70877 strain was selected to proceed for cultivation in a 2 l bioreactor, using glycerol byproduct (40 g/l), as sole carbon source. Biomass production by K. pastoris was performed under controlled temperature and pH (30.0 ºC and 5.0, respectively). More than 100 g/l biomass was obtained in less than 48 h. The yield of biomass on a glycerol basis was 0.55 g/g during the batch phase and 0.63 g/g during the fed-batch phase. In order to optimize the downstream process, by increasing extraction and purification efficiency of CGC from K. pastoris biomass, several assays were performed. It was found that extraction with 5 M NaOH at 65 ºC, during 2 hours, associated to neutralization with HCl, followed by successive washing steps with deionised water until conductivity of ≤20μS/cm, increased CGC purity. The obtained copolymer, CGCpure, had a chitin:glucan molar ratio of 25:75 mol% close to commercial CGC samples extracted from A. niger mycelium, kiOsmetine from Kitozyme (30:70 mol%). CGCpure was characterized by solid-state Nuclear Magnetic Resonance (NMR) spectroscopy and Differential Scanning Calorimetry (DCS), revealing a CGC with higher purity than a CGC commercial (kiOsmetine). In order to optimize CGC production, a set of batch cultivation experiments was performed to evaluate the effect of pH (3.5–6.5) and temperature (20–40 ºC) on the specific cell growth rate, CGC production and polymer composition. Statistical tools (response surface methodology and central composite design) were used. The CGC content in the biomass and the volumetric productivity (rp) were not significantly affected within the tested pH and temperature ranges. In contrast, the effect of pH and temperature on the CGC molar ratio was more pronounced. The highest chitin: β-glucan molar ratio (> 14:86) was obtained for the mid-range pH (4.5-5.8) and temperatures (26–33 ºC). The ability of K. pastoris to synthesize CGC with different molar ratios as a function of pH and temperature is a feature that can be exploited to obtain tailored polymer compositions.(...)

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Clayish earth-based mortars can be considered eco-efficient products for indoor plastering since they can contribute to improve important aspects of building performance and sustainability. Apart from being products with low embodied energy when compared to other types of mortars used for interior plastering, mainly due to the use raw clay as natural binder, earth-based plasters may give a significant contribution for health and comfort of inhabitants. Due to high hygroscopicity of clay minerals, earth-based mortars present a high adsorption and desorption capacity, particularly when compared to other type of mortars for interior plastering. This capacity allows earth-based plasters to act as a moisture buffer, balancing the relative humidity of the indoor environment and, simultaneously, acting as a passive removal material, improving air quality. Therefore, earth-based plasters may also passively promote the energy efficiency of buildings, since they may contribute to decreasing the needs of mechanical ventilation and air conditioning. This study is part of an ongoing research regarding earth-based plasters and focuses on mortars specifically formulated with soils extracted from Portuguese ‘Barrocal’ region, in Algarve sedimentary basin. This region presents high potential for interior plastering due to regional geomorphology, that promote the occurrence of illitic soils characterized by a high adsorption capacity and low expansibility. More specifically, this study aims to assess how clayish earth and sand ratio of mortars formulation can influence the physical and mechanical properties of plasters. For this assessment four mortars were formulated with different volumetric proportions of clayish earth and siliceous sand. The results from the physical and mechanical characterization confirmed the significantly low linear shrinkage of all the four mortars, as well as their extraordinary adsorption-desorption capacity. These results presented a positive correlation with mortars´ clayish earth content and are consistent with the mineralogical analysis, that confirmed illite as the prevalent clay mineral in the clayish earth used for this study. Regarding mechanical resistance, although the promising results of the adhesion test, the flexural and compressive strength results suggest that the mechanical resistance of these mortars should be slightly improved. Considering the present results the mortars mechanical resistance improvement may be achieved through the formulation of mortars with higher clayish earth content, or alternatively, through the addition of natural fibers to mortars formulation, very common in this type of mortars. Both those options will be investigated in future research.