Medium-short-term and repetition effects of advergames on children consumer behaviour

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Miocene marine-continental correlations in the Lisbon area and some discussion related to personnal experience

Sandpit exploitation near Lisbon allowed collecting of many Miocene, non marine fossils. These sands are part of the mostly marine Miocene series in the Lower Tagus basin. The particularly favourable situation led several researchers to deal with marine-continental correlations. Difficulties often concern methodologic aspects. Some poorly based interpretations exerced a lasting influence. A critical approach is presented. Analysis requires data. Methods based upon models often lead to the temptation of fitting data in order to confirm a priori conclusions, or of mixing up data as if of equal statistic value while they have not at all the same weight. Erroneous interpretations' uncritical repetition for many years "upgraded" them into absolute truth. Another point is endemism vs. europeism. Miocene mammals from Lisbon compared well with corresponding French, contemporaneous taxa, while this was apparently not true for Spanish ones. Too much accent had been put on the endemic character of Spanish, or even regional, mammalian faunas. Nationalist bias and sensationalism also weigh, albeit negatively. Meanwhile nearly all the more evident examples as the rhinoceros Hispanotherium are discredited as Iberian endemisms. Taxa may appear as endemic just because they have not yet been found elsewhere. At least for the medium to large-sized mammals, with their huge geographic distribution, faunal differences depend much more on ecology, climate and environmental conditions. Emphasis on differences may also result from researchers that are often in a precarious situation and need very much to achieve short-term, preferably sensational results. Overvalued differences may mask real similarities. Unethic and not scientific behaviour are further enhanced by "nomina nuda" tricks that may simply be a way to circunvent or cheat the Priority Rule. On the other hand, access to communication networks may present as sensational novelties items that are not new at all, misleading the audience. A new class of "science people" arose, created by the media and not by the value of their real achievements. Discussion is presented on sedimentation processes and discontinuities that are often regarded as absolute precision dating tools, as well as on some geochemical and paleomagnetic interpretations. A very good chronologie frame has been obtained for the basin under study on the basis of an impressive set of data, providing a rather detailed and accurate frame for Miocene marine-continental correlations.

Three transducers for one photodetector: essays for optical communications

Dissertation presented to obtain the PhD degree in Electrical and Computer Engineering - Electronics

Evaluation of motor neuron excitability by CMAP scanning with modulated current

It is important to have better evaluation and understanding of the motor neuron physiology, with the goal to early and objectively diagnose and treat patients with neurodegenerative pathologies. The Compound Muscle Action Potential (CMAP) scan is a non-invasive diagnosis technique for neurodegenerative pathologies, such as ALS, and enables a quick analysis of the muscle action potentials in response to motor nerve stimulation. This work aims to study the influence of different pulse modulated waveforms in peripheral nerve excitability by CMAP scan technique on healthy subjects. A total of 13 healthy subjects were submitted to the same test. The stimuli were applied in the medium nerve on the right wrist and electromyography signal collected on the Abductor Pollicis Brevis (APB) muscle surface on the right thumb. Stimulation was performed with an increasing intensities range from 4 to 30 mA, with varying steps, 3 stimuli per step. The procedure was repeated 4 times per subject, each repetition using a different single pulse stimulation waveform: monophasic square, monophasic triangular, monophasic quadratic and biphasic square. Results were retrieved from the averaging of the stimuli on each current intensity step. The square pulse needs less current intensity to generate the same response amplitude regarding the other waves and presents a more steep curve slope and this effect is gradually decreasing for the triangular and quadratic pulse,respectively, being the difference even more evident regarding the biphasic pulse. The control of the waveform stimulation pulse allows varying the stimulusresponse curve slope.

Synthesis of Polymeric Nanoparticles for biomedical delivery applications

Polymeric nanoparticles (PNPs) have attracted considerable interest over the last few years due to their unique properties and behaviors provided by their small size. Such materials could be used in a wide range of applications such as diagnostics and drug delivery. Advantages of PNPs include controlled release, protection of drug molecules and its specific targeting, with concomitant increasing of the therapeutic index. In this work, novel sucrose and cholic acid based PNPs were prepared from different polymers, namely polyethylene glycol (PEG), poly(D,L-lactic-co-glycolic acid) (PLGA) and PLGA-co-PEG copolymer. In these PNP carriers, cholic acid will act as a drug incorporation site and the carbohydrate as targeting moiety. The uptake of nanoparticles into cells usually involves endocytotic processes, which depend primarily on their size and surface characteristics. These properties can be tuned by the nanoparticle preparation method. Therefore, the nanoprecipitation and the emulsion-solvent evaporation method were applied to prepare the PNPs. The influence of various parameters, such as concentration of the starting solution, evaporation method and solvent properties on the nanoparticle size, size distribution and morphology were studied. The PNPs were characterized by using atomic force microscopy (AFM), scanning electron microscopy (SEM) and dynamic light scattering (DLS) to assess their size distribution and morphology. The PNPs obtained by nanoprecipitation ranged in size between 90 nm and 130 nm with a very low polydispersity index (PDI < 0.3). On the other hand, the PNPs produced by the emulsion-solvent evaporation method revealed particle sizes around 300 nm with a high PDI value. More detailed information was found in AFM and SEM images, which demonstrated that all these PNPs were regularly spherical. ζ-potential measurements were satisfactory and evidenced the importance of sucrose moiety on the polymeric system, which was responsible for the obtained negative surface charge, providing colloidal stability. The results of this study show that sucrose and cholic acid based polymeric conjugates can be successfully used to prepare PNPs with tunable physicochemical characteristics. In addition, it provides novel information about the materials used and the methods applied. It is hoped that this work will be useful for the development of novel carbohydrate based nanoparticles for biomedical applications, specifically for targeted drug delivery.

Multipacket reception in the presence of in-band full-duplex communication

In-Band Full-DupleX (IB-FDX) is defined as the ability for nodes to transmit and receive signals simultaneously on the same channel. Conventional digital wireless networks do not implement it, since a node’s own transmission signal causes interference to the signal it is trying to receive. However, recent studies attempt to overcome this obstacle, since it can potentially double the spectral efficiency of current wireless networks. Different mechanisms exist today that are able to reduce a significant part of the Self- Interference (SI), although specially tuned Medium Access Control (MAC) protocols are required to optimize its use. One of IB-FDX’s biggest problems is that the nodes’ interference range is extended, meaning the unusable space for other transmissions and receptions is broader. This dissertation proposes using MultiPacket Reception (MPR) to address this issue and adapts an already existing Single-Carrier with Frequency-Domain Equalization (SC-FDE) receiver to IB-FDX. The performance analysis suggests that MPR and IB-FDX have a strong synergy and are able to achieve higher data rates, when used together. Using analytical models, the optimal transmission patterns and transmission power were identified, which maximize the channel capacity with the minimal energy consumption. This was used to define a new MAC protocol, named Full-duplex Multipacket reception Medium Access Control (FM-MAC). FM-MAC was designed for a single-hop cellular infrastructure, where the Access Point (AP) and the terminals implement both IB-FDX and MPR. It divides the coverage range of the AP into a closer Full-DupleX (FDX) zone and a farther Half-DupleX (HDX) zone and adds a tunable fairness mechanism to avoid terminal starvation. Simulation results show that this protocol provides efficient support for both HDX and FDX terminals, maximizing its capacity when more FDX terminals are used.

Auto-referência de sintomas de lesões músculo-esqueléticas ligadas ao trabalho LMELT numa grande empresa em Portugal

RESUMO - A dor, incómodo ou desconforto ao nível músculo-esquelético, sobretudo devido a situações e/ou postos de trabalho com elevadas exigências ao nível postural, de aplicação de força, de repetitividade ou por incorrecta distribuição das pausas, é aceite como um indicador de situações de risco passíveis de se encontrarem na génese de lesões músculo- -esqueléticas ligadas ao trabalho (LMELT) (Stuart-Buttle, 1994). No sentido de avaliar a prevalência de sintomas de LME, efectuou-se um estudo numa grande empresa da indústria de componentes para automóveis na região de Lisboa durante o ano de 2001. Utilizou-se um instrumento de recolha de informação construído a partir de uma adaptação do questionário nórdico músculo-esquelético (QNM) (Kuorinka et al., 1987). Com o apoio do serviço de saúde ocupacional da referida empresa, o questionário foi entregue a todos os trabalhadores, obtendo-se uma taxa de respondentes de 63,2% (n = 574). A população em estudo é maioritariamente do sexo feminino (83,9%), tem idades compreendidas entre os 18 e os 65 anos e a classe modal situa-se entre os 26 e os 33 anos (23,3%). Os resultados evidenciam uma alta prevalência de sintomatologia de LME e diferenças significativas de sintomas entre as categorias profissionais (1) operadores de máquina de costura, (2) trabalhadores dos armazéns e de transporte de mercadorias e (3) trabalhadores da logística, qualidade e escritórios. Os operadores apresentam índices superiores e diferentes (p < 0,05) de sintomatologia nos últimos doze meses ao nível da região cervical, ombros, cotovelos, ancas/coxas, pernas/joelhos e tornozelos/pés e nos punhos nos últimos sete dias. No presente estudo, a análise dos dados obtidos parece indicar que a natureza e as características da actividade de trabalho do grupo profissional operadores de máquina de costura (flexão cervical > 20°, trabalho muscular predominantemente estático ao nível da articulação dos ombros, elevação dos membros superiores > 45°, ortostatismo e exigências elevadas ao nível dos punhos/mãos) estão implicadas no desencadear da sintomatologia auto- -referida.

Perylene Diimide acceptors: Fabrication and characterization of electron-only, hole-only devices and solar cells

The thrust towards energy conservation and reduced environmental footprint has fueled intensive research for alternative low cost sources of renewable energy. Organic photovoltaic cells (OPVs), with their low fabrication costs, easy processing and flexibility, represent a possible viable alternative. Perylene diimides (PDIs) are promising electron-acceptor candidates for bulk heterojunction (BHJ) OPVs, as they combine higher absorption and stability with tunable material properties, such as solubility and position of the lowest unoccupied molecular orbital (LUMO) level. A prerequisite for trap free electron transport is for the LUMO to be located at a level deeper than 3.7 eV since electron trapping in organic semiconductors is universal and dominated by a trap level located at 3.6 eV. Although the mostly used fullerene acceptors in polymer:fullerene solar cells feature trap-free electron transport, low optical absorption of fullerene derivatives limits maximum attainable efficiency. In this thesis, we try to get a better understanding of the electronic properties of PDIs, with a focus on charge carrier transport characteristics and the effect of different processing conditions such as annealing temperature and top contact (cathode) material. We report on a commercially available PDI and three PDI derivatives as acceptor materials, and its blends with MEH-PPV (Poly[2-methoxy 5-(2-ethylhexyloxy)-1,4-phenylenevinylene]) and P3HT (Poly(3-hexylthiophene-2,5-diyl)) donor materials in single carrier devices (electron-only and hole-only) and in solar cells. Space-charge limited current measurements and modelling of temperature dependent J-V characteristics confirmed that the electron transport is essentially trap-free in such materials. Different blend ratios of P3HT:PDI-1 (1:1) and (1:3) show increase in the device performance with increasing PDI-1 ratio. Furthermore, thermal annealing of the devices have a significant effect in the solar cells that decreases open-circuit voltage (Voc) and fill factor FF, but increases short-circuit current (Jsc) and overall device performance. Morphological studies show that over-aggregation in traditional donor:PDI blend systems is still a big problem, which hinders charge carrier transport and performance in solar cells.