Métodos ágeis: características, pontos fortes e fracos e possibilidades de aplicação

Trabalho realizado sob orientação do Prof. António Brandão Moniz para a disciplina “Factores Sociais da Inovação” do Mestrado Engenharia Informática realizado na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa

Adaption of the Creative Commons approach and the roaming concept to spatial data infrastructures (SDI)

Dissertation submitted in partial fulfilment of the requirements for the Degree of Master of Science in Geospatial Technologies

High-performance flexible hybrid field-effect transistors based on cellulose fiber paper

IEEE Electron Device Letters, VOL. 29, NO. 9,

Write-erase and read paper memory transistor

Applied Physics Letters, Vol.93, issue 20

Application of the EcoBlock method to eco-design - electric hand dryers versus paper towels

Sustainable Construction, Materials and Practice, p. 426-432

Environmental Decision-making utilizing a Web GIS to Monitor Hazardous Industrial Emissions in the Valencian community of Spain

Dissertation submitted in partial fulfillment of the requirements for the Degree of Master of Science in Geospatial Technologies.

Tauroursodeoxycholic acid prevents Bax-induced membrane perturbation and cytochrome C release in isolated mitochondria

Biochemistry, 2003, 42 (10), pp 3070–3080 DOI: 10.1021/bi026979d

Renova black toilet paper: The creation of a glocal market space

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Management from the NOVA – School of Business and Economics

Portucel: Pulp and Paper: Equity Investment Report

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics

Controlo de qualidade interno: elaboração de um programa de Controlo de Qualidade Interno segundo as boas práticas da Qualidade

RESUMO: Esta dissertação pretende apresentar uma proposta para um programa de Controlo de Qualidade interno das hormonas tiroideias, segundo as boas práticas da qualidade. Para que se comprove o rigor e fiabilidade dos seus resultados analíticos, condição indispensável para que estes possam servir de base às mais diversas tomadas de decisão, toda a filosofia que envolve a qualidade assume um papel preponderante. Neste contexto a elaboração de um programa de controlo de qualidade adequado é muito importante e imprescindível. A realização do controlo de qualidade permite monitorizar o desempenho de todos os materiais, equipamentos, instrumentos e métodos analíticos bem como criar sinais de alerta para prevenir a emissão de resultados não-conformes e indicar a necessidade de ações corretivas. Permite também indicar a necessidade de melhorias em processos e em atividades ligadas aos operadores e consciencializar o pessoal de que o controlo da qualidade é um dever para com o cliente e tem a função de gerar confiança nos resultados obtidos. O controlo de qualidade interno abrange todos os procedimentos assumidos por um laboratório para avaliação contínua do seu trabalho. A sua finalidade é assegurar a consistência dos resultados diários e a sua conformidade com critérios definidos, avaliando a precisão dos ensaios e dando indicação do momento para se promoverem ações corretivas quando surge uma não conformidade. Segundo as melhores práticas da qualidade, serão calculados os valores do controlo de qualidade interno para as hormonas tiroideias, os seus limites e critérios (regras) de aceitabilidade, com base na relação entre o desempenho analítico e o Erro Máximo Admissível. Pretende-se assim, otimizar o desempenho do Controlo de Qualidade Interno, aperfeiçoando a capacidade de identificação do erro.-------- ABSTRACT: This paper intends to submit a proposal for a thyroid hormones internal quality Control program, according to the best quality practices. The whole philosophy involving quality plays a central role in order to prove the accuracy and reliability of the analytical results, a basic prerequisite for decision making. In this context the elaboration of an appropriate quality control program is essential and very important. Quality control allows the motorization of the performance of all materials, equipment, instruments and analytical methods, as well as the creation of warning signals indicating the need for corrective actions, to prevent the release of non-compliant results. It also indicates the need for improvements in the processes and operating activities as well as making the staff aware that quality control is a duty to the client and promotes confidence in the results. The internal quality control covers all procedures undertaken by a laboratory for a continuous evaluation of its performance. Its purpose is to ensure the consistency of the daily results and compliance with defined criteria, assessing the accuracy of the tests and indicating the moment to promote corrective actions when nonconformity appears. According to the best quality practices, the values of the internal quality control for the thyroid hormones, their limits and criteria (rules) of acceptability will be calculated, based on the relationship between analytical performance and the maximum allowable error. Thus, the aim is to optimize the performance of the Internal Quality Control, improving the ability for error detection and identification.

Lab on paper: biossensores colorimétricos de papel para a detecção de membros do complexo Mycobacterium tuberculosis

Este trabalho foi realizado no âmbito do projecto Lab on Paper, desenvolvido no Centro de Investigação de Materiais (CENIMAT) da Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa (FCT - UNL)

Double-walled PLLA/PLGA particles for the sustained release of Meloxicam: preparation, characterisation and contolled release studies

There were two main objectives in this thesis investigation, first, the production, characterisation, in vitro degradation and release studies of double walled microspheres for drug release control. The second one, and the most challenging, was the production of double walled nanospheres, also for drug control delivery. The spheres were produced using two polymers, the Poly(L-lactide)Acid, PLLA, and the Poly(L-lactide-co-glycolic)Acid, PLGA.Afterwards, a model drug, Meloxicam, which is an antiinflammatory drug, was encapsulated into the particles. Micro and nanospheres were produced by the solvent extraction/evaporation method, where perfect spherical particles were obtained. By varying the polymers PLLA/PLGA mass ratio, different core and shell composition, as well as several shell and core thickness were observed. In the particles with a PLLA/PLGA mass ratio 1:1, the shell is composed by PLLA and the core by PLGA. It was also verified that the Meloxicam has a tendency to be distributed in the PLGA layer. Micro and nanoparticles were characterised in morphology, size, polymer cristalinity properties and drug distribution. Particles degradation studies was performed, where the particles in a PVA solution of pH 7,4 where placed in an incubator, during approximately 40 days, at 120rpm, and 37ºC, simulating, as much as possible, the human body environment. From these studies, the conclusion was that particles containing a PLGA shell and a PLLA core degrade more rapidly, due to the fact that PLLA is more hydrophobic than the PLGA. Concerning the drug release controlled results, done also for 40 and 50 days, they showed that the microspheres containing a shell of PLLA release more slowly than when the shell is composed of PLGA. This result was predictable, since the drug is solubilised in the PLGA polymer and so, in that case, the PLLA shell works like a barrier between the drug and the outer medium. Another positive aspect presented by this study is the lower initial burst effect, obtained when using double walled particles, which is one of the advantages of the same. In a second part of this investigation, the production of the nanospheres was the main goal, since it was not yet accomplished by other authors or investigators. After several studies, referring to the speed, time and type of agitation, as well as, the concentration and volume of the first aqueous solution of poly-vinyl-alcohol (PVA) during the process of solvent extraction/evaporation it was possible to obtain double walled nanospheres.(...)

Towards printed carbon nanotube transistors on paper substrates

This thesis reports the work performed in the optimization of deposition parameters of Multi – Walled Carbon Nanotubes (MWCNT) targeting the development of a Field Effect Transistors (FET) on paper substrates. The CNTs were dispersed in a water solution with sodium dodecyl sulphate (SDS) through ultrasonication, ultrasonic bath and a centrifugation to remove the supernatant and have a homogeneous solution. Several deposition tests were performed using different types of CNTs, dis-persants, papers substrates and deposition techniques, such as spray coating and inkjet printing. The characterization of CNTs was made by Scanning Electron Microscopy (SEM) and Hall Effect. The most suitable CNT coatings able to be used as semiconductor in FETs were deposited by spray coat-ing on a paper substrate with hydrophilic nanoporous surface (FS2) at 100 ºC, 4 bar, 10 cm height, 5 second of deposition time and 90 seconds of drying between steps (4 layers of CNTs were deposited). Planar electrolyte gated FETs were produced with these layers using gold-nickel gate, source and drain electrodes. Despite the small current modulation (Ion/Ioff ratio of 1.8) one of these devices have p-type conduction with a field effect mobility of 1.07 cm2/V.s.

Da assessoria ao jornalismo : análise do processo de produção de press release na era digital em Portugal

A presente dissertação pretende fazer a análise do processo de produção do press release na assessoria em Portugal, a eficácia dessa ferramenta de comunicação junto dos jornalistas e, por inerência, a evolução da figura do assessor enquanto profissional reconhecido junto da comunidade jornalística. São também objetivos, compreender a relevância de um press release, perceber se gera efeito, analisar a possível forma de melhorar esta ferramenta e, ainda, perceber se esta ferramenta sofreu algum tipo de adaptação à era digital. A investigação inicia-se com a incursão pelos contextos e história das áreas profissionais em estudo, a assessoria de comunicação em agências e o jornalismo em Portugal, no quadro da crise económica e financeira de 2008 a 2013. O enfoque deste estudo será o procedimento e a eficácia de um press release, no período considerado. A pós-produção desta ferramenta implica o contacto entre dois interlocutores, os profissionais de assessoria e os profissionais do jornalismo. Finda esta investigação com análise baseada em seis entrevistas semiestruturadas, divididas em categorias profissionais e setores de atividade: jornalistas, assessores, assessores ex-jornalistas, nas áreas de saúde e consumo. Deste estudo resulta que o press release, privilegiando-se a sua estrutura e conteúdo, é, como foi, uma ferramenta fundamental muitas vezes, e nos dias de hoje, no auxílio às negociações one to one.

Digital microfluidics on paper

This thesis is one of the first reports of digital microfluidics on paper and the first in which the chip’s circuit was screen printed unto the paper. The use of the screen printing technique, being a low cost and fast method for electrodes deposition, makes the all chip processing much more aligned with the low cost choice of paper as a substrate. Functioning chips were developed that were capable of working at as low as 50 V, performing all the digital microfluidics operations: movement, dispensing, merging and splitting of the droplets. Silver ink electrodes were screen printed unto paper substrates, covered by Parylene-C (through vapor deposition) as dielectric and Teflon AF 1600 (through spin coating) as hydrophobic layer. The morphology of different paper substrates, silver inks (with different annealing conditions) and Parylene deposition conditions were studied by optical microscopy, AFM, SEM and 3D profilometry. Resolution tests for the printing process and electrical characterization of the silver electrodes were also made. As a showcase of the applications potential of these chips as a biosensing device, a colorimetric peroxidase detection test was successfully done on chip, using 200 nL to 350 nL droplets dispensed from 1 μL drops.