Exemplo de vulcanismo tardio em Portugal- rocha ígnea post-Miocénico inferior (Figueira-Algarve)

A small outcrop of an igneous rock (basanite) was observed in 1971 at Figueira-Mexilhoeira Grande-Algarve, enclosed by Miocene limestone and showing clear evidente of low grade thermal effects along the contact with the igneous mass. This is in agreement with F. L. Pereira Sousa who was the first geologist to admit (1917) the existence of Miocene igneous rocks in Algarve although subsequently they were not possible to localize. This work reports studies on petrography and chemical composition of this basanite and describes the evidence of the thermal effects upon the surrounding calcareous rocks. This well localized small outcrop represents an igneous rock more modern than the basaltic complex of Lisbon, hitherto assigned to the Eocene in age and recently ascribed to the Upper Cretaceous and until now considered the most recent manifestation of volcanic activity in Portugal. However this does not exclude the possibility of existence of even more modem igneous rocks in Algarve region.

POST-PROCESSING TECHNIQUES SUITABILITY FOR MESOLEVEL FREE BOUNDARY FLOWS

Reliable flow simulation software is inevitable to determine an optimal injection strategy in Liquid Composite Molding processes. Several methodologies can be implemented into standard software in order to reduce CPU time. Post-processing techniques might be one of them. Post-processing a finite element solution is a well-known procedure, which consists in a recalculation of the originally obtained quantities such that the rate of convergence increases without the need for expensive remeshing techniques. Post-processing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed strongly. In previous works influence of smoothness of non-homogeneous Dirichlet condition, imposed on smooth front was examined. However, usually quite a non-smooth boundary is obtained at each time step of the infiltration process due to discretization. Then direct application of post-processing techniques does not improve final results as expected. The new contribution of this paper lies in improvement of the standard methodology. Improved results clearly show that the recalculated flow front is closer to the ”exact” one, is smoother that the previous one and it improves local disturbances of the “exact” solution.

Post-processing Techniques in Free Boundary Flows during Liquid Composite Moulding Processes

Post-processing a finite element solution is a well-known technique, which consists in a recalculation of the originally obtained quantities such that the rate of convergence increases without the need for expensive remeshing techniques. Postprocessing is especially effective in problems where better accuracy is required for derivatives of nodal variables in regions where Dirichlet essential boundary condition is imposed strongly. Consequently such an approach can be exceptionally good in modelling of resin infiltration under quasi steady-state assumption by remeshing techniques and with explicit time integration, because only the free-front normal velocities are necessary to advance the resin front to the next position. The new contribution is the post-processing analysis and implementation of the freeboundary velocities of mesolevel infiltration analysis. Such implementation ensures better accuracy on even coarser meshes, which in consequence reduces the computational time also by the possibility of employing larger time steps.

Observations sedimentologiques sur les depots du Neogene post-nappe dans la region de Moulay Yacoub (NW de Fes- Maroc)

Proceedings of the I" R.C.A.N.S. Congress, Lisboa, October 1992

Post-transcriptional regulation of HFE gene expression

Thesis presented to obtain the Ph.D. degree in Biology (Molecular Genetics), by the Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia.

Designing a technology assessment post-graduation programme: experiences, limits and needs

The post-graduation in the field of Technology Assessment (TA) is recent and that are several and different ways to be organised. Most experiences are related with the Masters diplom level (2nd cycle of graduation in high education). Just one in PhD level is explicit in the field of TA, and some other PhD courses include also TA topics in their programme structure. In this chapter we will analyse the problems related with the design of a post-graduation (MA, MSc or PhD) programme in the field of TA using as reference some international experiences. Hereby, the main conclusion seems to address labour market needs in the specialised knowledge of TA, of technology management or technology innovation. In this sense TA should be included as “minor” into post-graduation courses which may range from engineering disciplines to social sciences. As a graduation programme it can fill an expertise gap between technicians, engineers, scientists and the strategic decision makers or policy makers.

Designing a technology assessment post-graduation programme: experiences, limits and needs

IET Working Papers Series No. WPS09/2010

The Vasco da Gama Bridge on the Tagus Estuary: A paradigm of bad decision making, but good post-evaluation

World Transport Policy & Practice, Vol.6, nº2, (2000)

Biochemistry of grape berries: post-genomics approaches to uncover the effects of water deficits on ripening

Dissertation presented to obtain the Ph.D degree in Biochemistry, Plant Physiology

A efectividade de um programa de exercícios terapêuticos na doença osteo-articular no idoso

RESUMO: O presente estudo teve como objectivo avaliar a efectividade de um programa de intervenção de fisioterapia comparativamente ao tratamento conservador (calor húmido, ultra-som e massagem), relativamente à dor e capacidade funcional, no utente idoso com doença osteoarticular do joelho. A amostra foi aleatória, tendo sido seleccionados 20 utentes que respeitaram os critérios de inclusão, e que foram distribuídos aleatoriamente pelos dois grupos de tratamento, 9 no grupo A (experimental) e 11 no grupo B (controle). Todos os utentes deram o seu consentimento informado. Trata-se de um estudo experimental, controlado aleatorizado (RCT). A intervenção em estudo consistiu em 15 sessões de tratamento individuais, efectuadas 3 vezes por semana. O programa terapêutico efectuado pelo grupo A incluiu o tratamento conservador (20 minutos calor húmido, 5 minutos ultra-som (contínuo; 1,5W/cm2) e aproximadamente 10 minutos de massagem local) e o protocolo de exercícios terapêuticos em estudo. Este protocolo de exercícios foi progredindo semanalmente em termos da sua intensidade. Os utentes do Grupo B efectuaram apenas o tratamento conservador (tal como no grupo A). Para avaliar a dor e a capacidade funcional foi utilizado o Questionário knee Injury and Osteoarthritis Outcome Score. A análise dos resultados foi realizada através dos testes Mann-Whitney e Kruskal-Wallis para a comparação entre grupos. Os resultados sugerem não haver diferenças estatisticamente significativos entre os grupos, embora o grupo de controle tenha obtido melhores resultados. O grupo B apresentou uma diminuição da dor de 17,33, comparativamente aos valores de -3,00 no grupo A (p=0,101), e melhoria da capacidade funcional de 13,00, mantendo-se a capacidade funcional igual, no grupo A (0,00) p=0,080). Estes resultados parecem sugerir que não há diferenças significativas entre as duas modalidades de intervenção, realçando a necessidade de continuar a investigar este protocolo de exercícios e a sua efectividade.-----------------ABSTRACT: The aims of this study was to evaluate the effectiveness of a treatment program compared with conventional treatment (post hoots, ultrasound and massage), for the outcomes pain and functional ability in elderly with knee osteoarthritis. The sample was non-probability, and 20 patients have been selected that fulfilled the criteria for inclusion and who were randomly assigned to the two treatment groups, in group A and 11 in group B. All of the patients gave their informed consent. This is an experimental, randomized controlled trial (RCT) with blinded assessment, of comparative design. This study protocol program was carry out in 15 individual treatment sessions, 3x per week. The therapeutic program made by group A consisted of the performance of conservative treatment: 20 minutes of hot packs, 5 minutes of ultrasound (continuous, 1.5 W/cm2) and 10 minutes of massage plus the exercise protocol therapy consisted of: isometric exercises of quadriceps contractions, muscle strengthening for knee and aerobic training. This exercise protocol was progressing every week in terms of its intensity. The users in Group B, only made the conservative treatment (such as in group A). In this study there were evaluated the pain and functional capacity, assessed by questionnaire knee Injury Osteoarthritis Outcome Score. For comparison between groups were used Mann-Whitney and Kruskal-Wallis tests. The results revealed that in group B was that it obtained better results, although they are not statistical significance. The group B show a decrease in pain of 17.33 compared to -3.00 in group A (p = 0.101), and improved capacity functional of 13.00, keeping in group A (0.00) (p = 0.080). However, the differences are not statistically significant. These results show that there are not statistically significant in both treatments, but more studies are needed.

The words about a “sea of trees”. Colonial and post-colonial narratives about Gorongosa (Mozambique)

8º Congresso Ibérico de Estudos Africanos (CIEA8). Madrid, 2012

Inversão estocástica de sísmica 3D post-stack e dados de poço para a caracterização de reservatórios e modelação de propriedades

Dissertação para obtenção do Grau de Mestre em Engenharia Geológica (Georrecursos)

Yeast as a model system to study genetic and post-translational regulation of metabolic pathways in mammals

Dissertation presented to obtain the Ph.D degree in Biology

Epidemiological studies of Streptococcus pneumoniae carriage in the post-vaccination era among two risk groups: children and the elderly

Dissertation presented to obtain the Ph.D. degree in Biology/ Molecular Biology

Contributo para a validação da versão portuguesa da Quebec Back Pain Disability Scale : fiabilidade e poder de resposta em utentes com dor lombar crónica

RESUMO: Um dos principais resultados das intervenções de Fisioterapia dirigidas a utentes com Dor Lombar Crónica (DLC) é reduzir a incapacidade funcional. A Quebec Back Pain Disability Scale (QBPDS) é um instrumento amplamente aceite a nível internacional na medição do nível de incapacidade funcional reportada pelos indivíduos com DLC. O objetivo deste estudo é dar um contributo para a adaptação cultural da versão portuguesa da QBPDS (QBPDS-VP) e investigar o poder de resposta e interpretabilidade da escala. Metodologia: Realizou-se um estudo metodológico, multicentro, baseado num coorte prospetivo de 132 utentes com DLC. Os utentes foram recrutados a partir da lista de espera de 16 serviços de Medicina Física e de Reabilitação/Fisioterapia de várias áreas geográficas de Portugal. A QBPDS- VP foi administrada 3 vezes, em 3 momentos de recolha de dados distintos: T0 - momento inicial (utentes em lista de espera); T1 - 1 semana de intervalo (início dos tratamentos de Fisioterapia); e T2 - 6 semanas de intervalo (pós-intervenção de Fisioterapia). Os dados recolhidos em T0 foram utilizados para a análise fatorial e para o estudo da consistência interna (n=132); os dados da amostra emparelhada de T0 e T1 (n=132) para a fiabilidade teste-reteste; e os dados da amostra emparelhada de T0 e T2 (n=120) para a análise do poder de resposta e interpretabilidade. A âncora externa utilizada foi a perceção global de mudança, neste caso a PGIC- VP, que foi respondida em T1 e T2. O nível de significância para o qual os valores se consideraram satisfatórios foi de p≤ 0,05. O tratamento dos dados foi realizado no software IBM SPSS Statistics (versão 20). Resultados: A QBPDS- VP é uma escala unidimensional, que revela uma excelente consistência interna (α de Cronbach= 0,95) e uma fiabilidade teste-reteste satisfatória (CCI= 0,696; IC 95%: 0,581–0,783). Esta escala demonstrou um poder de resposta moderado, quando aplicada em utentes com DLC ( = 0,426 e AAC= 0,741; IC 95%: 0,645 – 0,837). A Diferença Mínima Detetável (DMD) estimada foi de 19 pontos e as estimativas da Diferença Mínima Clinicamente Importante (DMCI) variaram entre 7 (pelo método curva ROC) e 8 pontos (pelo método “diferença média de pontuação”). A estimativa pela curva ROC deriva do ponto ótimo de corte de 6,5 pontos, com Área Abaixo da Curva (AAC)= 0,741, sensibilidade de 72%, e especificidade de 71%. Uma análise complementar da curva ROC baseada nas diferenças de pontuações da QBPDS, expressa em percentagem, revelou um ponto ótimo de corte de - 24% (AAC= 0,737, sensibilidade de 71%, e especificidade de 71%). Para pontuações iniciais da QBPDS- VP mais altas (≥34 pontos), foi encontrado um ponto ótimo de corte de 10,5 pontos (AAC= 0,738, sensibilidade de 73%, e especificidade de 67%). Conclusão: A QBPDS-VP demonstrou bons níveis de fiabilidade e poder de resposta, recomendando-se o seu uso na medição e avaliação da incapacidade funcional de utentes com DLC. A DMD estimada, de 19 pontos, determinou uma amplitude válida da QBPDS-VP de 19 a 81 pontos. Este estudo propõe estimativas de DMCI da QBPDS- VP numa aplicação específica da escala (em utentes com DLC que são referidos para a intervenção de Fisioterapia). A pontuação inicial da QBPDS- VP deve ser considerada na interpretação de mudanças de pontuação, após a intervenção de Fisioterapia.------------ ABSTRACT: One of the main results of physiotherapy interventions for patients with Chronic Low Back Pain (CLBP) is decrease the functional disability. The Quebec Back Pain Disability Scale (QBPDS) is an instrument widely accepted internationally, in measuring the level of disability reported by individuals with CLBP. The purpose of this study is to contribute to the cultural adaptation of the Portuguese version of QBPDS (QBPDS - PV) and investigate the Responsiveness and Interpretability of QBPDS-PV. Methodology: This was a methodological and multicenter study, based on a sample of 132 subjects with CLBP. The patients were recruited from the waiting lists of 16 medicine rehabilitation service, in many Portugal districts. The Quebec Back Pain Disability Scale was administered in three different moments: T0 – baseline (patients in the waiting list); T1- one week after T0 (the beginning of treatment); and T2 – six weeks after T1 (the posttreatment). The data collected at T0 were used for factor analysis and to study the internal consistency (n = 132); paired sample data of T0 and T1 (n=132) were used for test-retest reliability, and sample data paired for T0 and T2 (n=120) used for responsiveness and interpretability analysis. The external anchor was the global perception of change, measured by the Portuguese version of Patient’s Global Impression of Change (PGIC) Scale. The minimal level of significance established was p ≤ 0,05. Data analysis was performed using the IBM SPSS Statistics software (version 20). Results: The QBPDS-PV is a unidimensional scale, demonstrates an excellent internal consistency (Cronbach's α=0.95) and satisfactory test-retest reliability (ICC= 0.696, 95% CI: 0.581–0.783). The scale revealed moderate responsiveness when applied to patients with CLBP ( = 0.426 and AUC= 0.741, 95% CI: 0.645 - 0.837). The Smallest Detectable Change (SDC) was 19 points, whereas the Minimal Clinically Important Change (MCIC) ranged between 7 (ROC curve method) and 8 points (by the "mean difference score"). The estimate was derived from the ROC curve by an optimal cutoff point of 6.5 points, with Area Under the Curve (AUC)= 0.741, sensitivity 72%, and specificity of 71%. A complementary analysis of the ROC curve based on differences in QBPDS scores from baseline, expressed in percentage, revealed an optimal cutoff point of -24% (AUC= 0.737, sensitivity of 71%, and specificity of 71%). For the highest initial scores of QBPDS-PV (≥ 34 points) was found an optimal cutoff of 10.5 points (AUC= 0.738, sensitivity of 73%, and specificity 67%). Conclusion: The QBPDS-PV demonstrated good levels of reliability and responsiveness, being recommended its use in the measurement and evaluation of disability of patients with CLBP. The SDC of 19 points determined the QBPDS‟ scale width of 19 to 81. This study proposes MCIC values for QBPDS –PV for this specific setting (in CLBP patients who are referred for physiotherapy intervention). The QBPDS –PV baseline score have to be taken into account while interpreting the score change after physiotherapy intervention.